Bosch VEZ-400 Series Manuale utente
AUTDOME 4000 Mini PTZ
Dome
VEZ-400 Series
en Operations Manual
Table of contents
1Safety 5
1.1 Safety precautions 5
1.2 Important safety instructions 6
1.3 Important notices 8
1.4 FCC & ICES compliance 12
1.5 Bosch notices 15
2Description 17
2.1 Features 17
3Unpacking 19
3.1 Parts List 19
3.2 Additional Tools Required 21
3.3 Accessories 21
4Installation Overview 24
5Installing a Surface Mount 25
6Connection 29
6.1 RS-485 Connections 31
6.2 Video Connection 33
6.3 Alarm Connections 33
6.4 Power Connections 35
6.5 Camera Settings 35
6.5.1 Setting the address (ID) of the camera 37
6.5.2 Setting the protocol of the camera 37
7On-Screen Display (OSD) Menu 39
7.1 Basic Navigation and Common Actions 39
7.2 Main Menu 42
7.2.1 Editing Titles 43
7.2.2 Clearing Saved Functions 44
7.3 System Setup Menu 45
7.3.1 System Information 45
7.3.2 Reboot 46
7.3.3 Initialize 47
7.3.4 Password 48
7.4 Display Setup 49
AUTDOME 4000 Mini
PTZ Dome Table of Contents | en 3
Bosch Security Systems, Inc. 2013.4 | |
7.4.1 OSD Setup 49
7.4.2 Privacy Zone 51
7.4.3 Image Setup 52
7.4.4 Motion/Face Detection 53
7.4.5 Language 54
7.5 Camera Setup 55
7.5.1 Focus/Zoom 55
7.5.2 WB Setup 56
7.5.3 AE Setup 58
7.5.4 D/N Setup 59
7.5.5 Advanced 60
7.5.6 WDR/DNR 61
7.6 Dome Motion Setup 63
7.6.1 General Setup 63
7.6.2 Motion Setup 64
7.6.3 Home Action 66
7.6.4 Calibration 67
7.7 Preset Setup 68
7.8 Pattern Setup 70
7.9 Tour Setup 71
7.10 Scan Setup 72
7.11 Alarm Setup 74
8Troubleshooting 77
9Technical Specifications 80
10 Dimensions 83
11 Bosch Protocol 84
12 Pelco Protocol 87
4en | Table of Contents AUTDOME 4000 Mini
PTZ Dome
2013.4 | | Bosch Security Systems, Inc.
Safety
Before installing and operating the camera, please read this
manual carefully.
Safety precautions
Danger!
High risk: This symbol indicates an imminently hazardous
situation such as "Dangerous Voltage" inside the product.
If not avoided, this will result in an electrical shock, serious
bodily injury, or death.
!
Warning!
Medium risk: Indicates a potentially hazardous situation.
If not avoided, this could result in minor or moderate bodily
injury.
!
Caution!
Low risk: Indicates a potentially hazardous situation.
If not avoided, this could result in property damage or risk of
damage to the unit.
Notice!
This symbol indicates information or a company policy that
relates directly or indirectly to the safety of personnel or
protection of property.
1
1.1
AUTDOME 4000 Mini
PTZ Dome Safety | en 5
Bosch Security Systems, Inc. 2013.4 | |
Important safety instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow these instructions.
5. Do not install near any heat sources such as radiators,
heaters, stoves, or other equipment (including amplifiers)
that produce heat.
6. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the
third prong is provided for your safety. If the provided plug
does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
7. Protect the power cord from being walked on or pinched,
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
8. Only use attachments/accessories specified by the
manufacturer.
9. Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer. When a cart is used, use
caution when moving the cart/apparatus combination to
1.2
6en | Safety AUTDOME 4000 Mini
PTZ Dome
2013.4 | | Bosch Security Systems, Inc.
avoid injury from tip-over.
10. Unplug this apparatus during lightning storms or when l
unused for long periods of time. This will prevent damage
to the unit from lightning and power line surges.
11. Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in a way,
such as power supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
AUTDOME 4000 Mini
PTZ Dome Safety | en 7
Bosch Security Systems, Inc. 2013.4 | |
Important notices
!
Caution!
A regulated 24 VAC, 43W power supply is recommended for use
with this camera for the best picture and the most stable
operation. An unregulated power supply can cause damage to
the camera. When unregulated power supply is applied,
product warranty will be void.
Bosch recommends using the camera with a monitor that has a
CCTV-quality 75 Ohm video impedance level. If your monitor is
switched to high impedance, please adjust accordingly.
Do not attempt to disassemble the camera to gain access to the
internal components. Refer servicing to your dealer or to
qualified service personnel.
Never face the camera towards the sun or any bright or
reflective light. This may cause smear on the picture and
possible damage to the CCD.
Do not remove the serial sticker for the warranty service.
All-pole power switch - Incorporate an all-pole power switch,
with a contact separation of at least 3 mm in each pole, into the
electrical installation of the building. If it is needed to open the
housing for servicing and/or other activities, use this all-pole
switch as the main disconnect device for switching off the
voltage to the unit.
Camera grounding - For mounting the camera in potentially
damp environments, ensure to ground the system using the
ground connection of the power supply connector (see section:
Connecting external power supply).
Camera lens - An assembled camera lens in the outdoor housing
must comply and be tested in accordance with UL/IEC60065.
Any output or signal lines from the camera must be SELV or
1.3
8en | Safety AUTDOME 4000 Mini
PTZ Dome
2013.4 | | Bosch Security Systems, Inc.
Limited Power Source. For safety reasons, the environmental
specification of the camera lens assembly must be within the
environmental specification of -10 °C (14 °F) to 50 °C (122 °F).
Camera signal - Protect the cable with a primary protector if the
camera signal is beyond 140 feet, in accordance with NEC800
(CEC Section 60).
Coax grounding:
– Ground the cable system if connecting an outside cable
system to the unit.
– Connect outdoor equipment to the unit's inputs only after
this unit has had its grounding plug connected to a
grounded outlet or its ground terminal is properly
connected to a ground source.
– Disconnect the unit's input connectors from outdoor
equipment before disconnecting the grounding plug or
grounding terminal.
– Follow proper safety precautions such as grounding for any
outdoor device connected to this unit.
U.S.A. models only - Section 810 of the National Electrical Code,
ANSI/NFPA No.70 provides information regarding proper
grounding of the mount and supporting structure, grounding of
the coax to a discharge unit, size of grounding conductors,
location of discharge unit, connection to grounding electrodes,
and requirements for the grounding electrode.
AUTDOME 4000 Mini
PTZ Dome Safety | en 9
Bosch Security Systems, Inc. 2013.4 | |
Disposal - Your Bosch product was developed and
manufactured with high-quality material and
components that can be recycled and reused. This
symbol means that electronic and electrical
appliances, which have reached the end of their
working life, must be collected and disposed of
separately from household waste material. Separate
collecting systems are usually in place for disused
electronic and electrical products. Please dispose of
these units at an environmentally compatible
recycling facility, per European Directive 2002/96/EC.
Electronic Surveillance - This device is intended for use in
public areas only. U.S. federal law strictly prohibits surreptitious
recording of oral communications.
Environmental statement - Bosch has a strong commitment
towards the environment. This unit has been designed to
respect the environment as much as possible.
Electrostatic-sensitive device - Use proper CMOS/MOS-FET
handling precautions to avoid electrostatic discharge. NOTE:
Wear required grounded wrist straps and observe proper ESD
safety precautions when handling the electrostatic-sensitive
printed circuit boards.
Fuse rating - For protection of the device, the branch circuit
protection must be secured with a maximum fuse rating of 16A.
This must be in accordance with NEC800 (CEC Section 60).
Moving - Disconnect the power before moving the unit. Move
the unit with care. Excessive force or shock may damage the
unit and the hard disk drives.
Outdoor signals - The installation for outdoor signals, especially
regarding clearance from power and lightning conductors and
transient protection, must be in accordance with NEC725 and
NEC800 (CEC Rule 16-224 and CEC Section 60).
Permanently connected equipment - Incorporate a readily-
accessible disconnect device in the building installation wiring.
10 en | Safety AUTDOME 4000 Mini
PTZ Dome
2013.4 | | Bosch Security Systems, Inc.
Altri manuali per VEZ-400 Series
4
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Bosch Telecamera di sicurezza
Bosch
Bosch DINION XF LTC 0495 Manuale utente
Bosch
Bosch LTC 0510 Series Manuale utente
Bosch
Bosch AN traffic 4000 IR Manuale utente
Bosch
Bosch NBN-80122 Manuale utente
Bosch
Bosch AVIOTEC 8000i IR Guida
Bosch
Bosch Autodome IP 4000 HD Manuale utente
Bosch
Bosch NBN-498-11P Manuale utente
Bosch
Bosch AUTODOME IP starlight 5000i IR Manuale utente
Bosch
Bosch NDP-7512-Z30C Manuale utente
Bosch
Bosch FLEXIDOME IP starlight 8000i Manuale utente
Bosch
Bosch FLEXIDOME IP micro 2000 Manuale utente
Bosch
Bosch VG4 Series Manuale utente
Bosch
Bosch FlexiDome NDC-455V03-21PS Manuale utente
Bosch
Bosch VG5-7230-CPT5 Manuale utente
Bosch
Bosch EX72MNX8V0922-N Manuale utente
Bosch
Bosch WZ20NXV550‑0 Manuale utente
Bosch
Bosch LTC 0610/11 Manuale utente
Bosch
Bosch AUTODOME IP starlight 5000i Manuale utente
Bosch
Bosch MicroDome NDC-274-P Manuale utente
Bosch
Bosch 200 Series Manuale utente
