Bosch VJR-A3-IC Manuale utente

AutoDome Junior

VJR-A3-IC

en Installation Manual

AutoDome Junior Table of Contents | en 3

Bosch Security Systems, Inc. Installation Manual F.01U.168.034 | 3.0 | 2010.12

Table of Contents

1 Installing a Recessed Mount 4

1.1 Description 4

1.1.1 Additional Requirements 4

1.1.2 Preparing the Ceiling for Installation 5

1.1.3 Installing the Camera to the Mounting Plate 8

4en | Installing a Recessed Mount AutoDome Junior

F.01U.168.034 | 3.0 | 2010.12 Installation Manual Bosch Security Systems, Inc.

1 Installing a Recessed Mount

1.1 Description

This chapter details how to recess mount the AutoDome Junior.

1.1.1 Additional Requirements

– Appropriate straight slot screwdrivers

– No. 2 Phillips screwdriver

– Appropriate tool for cutting a hole in drywall or ceiling tile

(if applicable)

– 4 in. x 4 in. junction box (optional)

– T-10 Torx wrench

– VJR-A3-SP, support kit for VJR-A3-IC mounting kit

NOTICE!

The image sensors in modern CCD cameras are highly sensitive

and require special care for proper performance and extended

lifetime. Follow the guidelines for optimum results with your

camera:

– Do not expose to direct sunlight or bright spotlights in

operating and nonoperating conditions.

– Avoid bright lights in the field of view of the camera. Bright

lights cause a “smearing” effect, which is visible as white

lines above and below the highlight. Prolonged exposure to

bright lights may cause bleaching of the sensor's color

filters. This will be visible as colored spots in the picture

and is irreversible.

AutoDome Junior Installing a Recessed Mount | en 5

Bosch Security Systems, Inc. Installation Manual F.01U.168.034 | 3.0 | 2010.12

1.1.2 Preparing the Ceiling for Installation

To mount to a recess mount, do the following:

1. Determine a secure location for the recessed mount

(supplied separately).

Figure 1.1 Recess Mount Dimensions

2. Drill or cut a 200 mm hole with a tolerance of 2.2 mm ( 7.9

in. ± 1/8).

3. Optional: if installing the AutoDome Junior HD to a

suspended ceiling tile or any other surface where

additional support is required, the VJR-A3-SP mounting kit

is recommended (supplied separately).

104.9

(4.13)

71.6

(2.82)

(in.) 229.0

(9.02)

6en | Installing a Recessed Mount AutoDome Junior

F.01U.168.034 | 3.0 | 2010.12 Installation Manual Bosch Security Systems, Inc.

4. Align holes of mounting plate (supplied with dome) with

mounting bracket and attach with screws. Ensure that

both the crescent shape of the mounting plate and the

crescent shape of the mounting bracket are aligned.

Figure 1.2 Attach Mounting Plate to Mounting Bracket

5. Loosen the two clamp drive screws (item 5, above) so that

the clamping plates move freely.

6. Insert mount through the hole in the ceiling. Slide clamps

out and down so that the ceiling/drywall is captured in

between the clamps and the bracket flange. The ceiling/

drywall must have a maximum thickness of 41.7 mm

(1.64 in.) and an minimum thickness of 12.7 mm (0.50 in.).

1 Mounting Bracket

2 Mounting Plate

3 Clamping Plate

4 Crescent Shape

5 Clamp Drive Screw

AutoDome Junior Installing a Recessed Mount | en 7

Bosch Security Systems, Inc. Installation Manual F.01U.168.034 | 3.0 | 2010.12

Figure 1.3 Attach Recess Mount to Ceiling

7. Tighten both clamps using the clamp drive screws

(installed on the assembly) and a #2 Phillips screwdriver.

NOTICE!

Over-torquing the ceiling clamps can damage the clamp or

ceiling. Only tighten the clamp until it contacts the ceiling and

you start to feel some resistance. If using a power screwdriver,

set the torque level to the lowest setting.

NOTICE!

If you need to install the the VJR-A3-SP Support Bracket, refer

to the guide included with the bracket. Once the bracket is

installed, continue with the next section.

8en | Installing a Recessed Mount AutoDome Junior

F.01U.168.034 | 3.0 | 2010.12 Installation Manual Bosch Security Systems, Inc.

1.1.3 Installing the Camera to the Mounting Plate

To install the base to a surface or suspended ceiling using the

supplied mounting plate, do the following:

1. Loosen the single safety locking screw on the base of the

unit using the user-supplied T-10 Torx wrench.

Figure 1.4 Unlock Safety Locking Screw

2. Remove the screw from the Earth ground ( )on the top

of the mounting bracket.

3. Attach a user-supplied ground wire to the Earth ground

( ) screw hole on the mounting bracket and secure with

the screw.

4. Attach the green grounding wire from the unit to the

grounded ( ) screw hole on the mounting bracket using

the attached captive screw washer.

5. Route wires on the side of mounting plate with the

crescent shaped cut-out.

6. Connect the mating connectors (supplied in the accessory

kit) with the flying leads to the user supplied wiring.

CAUTION!

All wires for installation applications must be routed through a

grounded conduit.

AutoDome Junior Installing a Recessed Mount | en 9

Bosch Security Systems, Inc. Installation Manual F.01U.168.034 | 3.0 | 2010.12

7. Plug the matching connectors from the camera into the

mating connectors from the ceiling.

Figure 1.5 Match Connectors

1 Locking Screw

2 Crescent Shape

3 Mounting Plate

4 Vertical Tab

10 en | Installing a Recessed Mount AutoDome Junior

F.01U.168.034 | 3.0 | 2010.12 Installation Manual Bosch Security Systems, Inc.

8. Attach the camera to the mounting plate by inserting the

vertical tab on the plate (item 1, below) into the recessed

slot on the top of the camera dome (Item 3) to the right of

the safety locking screw (item 2).

Note: Do not loosen the three brass buttons (item 4).

These brass buttons engage the slotted tabs (item 5) on

the mounting plate.

Figure 1.6 Tab/Slot Alignment Detail

1 Vertical Tab (on mounting plate)

2 Locking Screw

3 Recessed Slot (on dome housing)

4 Brass Button (total of three on housing)

5 Slotted Tab (total of three on mounting plate)

Indice

Altri manuali Bosch Telecamera di sicurezza

Bosch

Bosch LTC 1311/20 FlexiDome I Manuale utente

Bosch

Bosch DINION IP starlight 7000 HD Manuale utente

Bosch

Bosch MIC Series 500 Manuale utente

Bosch

Bosch NII-51022-V3 Manuale utente

Bosch

Bosch FLEXIDOME corner 9000 MP Istruzioni per il montaggio

Bosch

Bosch FLEXIDOME starlight HD 720p60 RD Manuale utente

Bosch

Bosch VDC-455V09-20S Manuale utente

Bosch

Bosch WZ18NV312-0 Manuale utente

Bosch

Bosch AUTODOME IP 4000 HD NEZ-4 series Manuale utente

Bosch

Bosch EX27 Manuale utente

Bosch

Bosch Dinion LTC0335/20 Manuale utente

Bosch

Bosch VDC?480 Series Manuale utente

Bosch

Bosch MIC Series 400 Manuale utente

Bosch

Bosch DinionHD NBN-832-38W Manuale utente

Bosch

Bosch LTC 0630 Series Manuale utente

Bosch

Bosch VGA-BUBBLE-CCLR Manuale utente

Bosch

Bosch FLEXIDOME HD VR Istruzioni per l’uso

Bosch

Bosch AUTODOME IP starlight 5000i Manuale utente

Bosch

Bosch DINION IP starlight 7000 HD Manuale utente

Bosch

Bosch VC973650T Manuale utente

Bosch

Bosch DINION 4000 AN Manuale utente

Bosch

Bosch VDN-240 Istruzioni per l’uso

Bosch

Bosch EX72C7V0922-N Manuale utente

Bosch

Bosch Dinion XF LTC 0495/11 Manuale utente

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente