Bosch VSS7902/00T Guida rapida

VSS7902/00T - VS79015T

VSS7905/00T - VS79055T

Installation and Operational Manual

Alarm/Action Box

Manuel d installation et d opération

Module Alarme/Intervention

Installations- und Bedieningsanleitung

Alarm/Aktion Box

Installatie- en bedieningshandleiding

Alarm/Actie Module

Manuale de installazione ed uso

Scatola Allarme/Action

Manual de instalação e de instruções

Caixa de Alarme/Acção

Manual de instalación y uso

Caja de Alarma/Acción

Installations- og betjeningsvejledning

Alarm/Handlingskasse

Installations- och bruksanvisning

Larm-/Åtgärdsenhet

Asennus- ja käyttöohje

Hälytys-/Toiminolaitteella

Installasjons- og bruksanvisning

Alarm/Handlingsboks

Installation and Operational Manual

Alarm/Action Box

Bosch Security Systems | 2004-06

7902 - 7905 | Installation and Operational Manual

TABLE OF CONTENTS

ENGLISH ................................................................ 1

FRANÇAIS ............................................................. 15

DEUTSCH .............................................................. 30

ESPAGÑOL ............................................................ 43

NEDERLANDS ...................................................... 58

ITALIANO .............................................................. 71

PORTUGUÊS ......................................................... 85

DANSK .................................................................... 98

SVENSKA ............................................................... 111

SUOMI .................................................................... 124

NORSK .................................................................... 136

GREEK .................................................................... 149

TECHNICAL SPECIFICATIONS ...................... 163

Bosch Security Systems | 2004-06

EN | 1

7902 - 7905 | Installation and Operational Manual

FCC DECLARATION

Installation and Operational ManualENGLISHEN

This device complies with part 15 of the FCC rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including

interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits

for a class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the

following measures:

• Increase the distance between the equipment and the receiver.

• Connect the equipment to a power socket on a circuit different

from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for

help.

Bosch Security Systems | 2004-06

EN | 2

7902 - 7905 | Installation and Operational Manual

ELECTRO MAGNETIC COMPATIBILITY (EMC)

Installation and Operational Manual

This equipment complies with European rules for EMC according to

EN55013, EN55020 and EN50082-1.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including

interference that may cause undesired operation.

The equipment conforms with the EMC directive and low-voltage

directive.

This device complies to FCC rules under test conditions that included

use of system cables and connectors between system components. If

you have any problems, contact your dealer.

WARNINGS

Any unauthorized modification to this equipment may cause

violation of the FCC rules resulting in the revocation of the

authorization to operate the equipment.

To prevent fire or shock hazard, do not expose this accessory to rain

or moisture. Do not attempt to disassemble the camera. In order to

prevent shock and fire hazard, do not remove screws or covers.

There are no user-serviceable parts inside.

WARNING:

The exclamation mark within a triangle is intended to alert

the user to the presence of important operating and

maintenance (servicing) instructions in the literature

accompanying the appliance.

Bosch Security Systems | 2004-06

EN | 3

7902 - 7905 | Installation and Operational Manual

Alarm/Action Box

TABLE OF CONTENTS

Introduction ...................................................................................... 4

Installation ........................................................................................ 6

Mounting the box

Installation and setting of an optional Passive Infra-Red

(PIR) detector

Location of the PIR

Installation of the PIR

PIR settings

Walk test LED

Pulse counter

System cable

Action output

Alarm input

Settings............................................................................................. 13

Tamper switch active

Bosch Security Systems | 2004-06

EN | 4

7902 - 7905 | Installation and Operational Manual

INTRODUCTION

Thank you for buying this accessory for your observation system.

1. System monitor

2. Video recorder (VCR)

3. Slave monitor

4. Accessory boxes (0-2 per cable)

5. System cameras

The following items are included in this kit:

1. Alarm/action box

1. System cable (5m/15ft)

1. User manual

1. PIR unit (for version with PIR)

1. Cable (50 cm) for interconnection between alarm/action box and

PIR (for version with PIR)

Colour Observation Monitor

5 5

talk action

menu _+next

auto view

Colour Observation system

Colour Observation Monitor

4 4

Bosch Security Systems | 2004-06

EN | 5

7902 - 7905 | Installation and Operational Manual

The alarm/action box performs two distinct functions:

1. Action

This function, for example, opens a door remotely.

Pressing the action button of the system monitor activates a relay

contact. This contact (N.O., N.C.) can activate, for instance, a door

opener.

Note that the action button only activates the action box designated

to the camera input whose picture is shown on the monitor screen.

2. Alarm

This function provides alarm inputs to the security system. All kinds

of detectors having a N.O. or N.C. contact are supported, for

example:

• infrared detectors

• smoke detectors

• magnetic door/window contacts

When a detector triggers the alarm/action box, the system monitor

automatically switches to the camera input the alarm/action box is

designated to. The system monitor produces an alarm and activates

its alarm contact.

There are two versions of the alarm/action box: one with a Passive

InfraRed (PIR) motion detector and one without. The description in

this manual applies to both versions.

N.O.

N.C.

common

N.O. = Normally Open

N.C. = Normally Closed

Bosch Security Systems | 2004-06

EN | 6

7902 - 7905 | Installation and Operational Manual

If the automatic camera sequence is active, it stops at the camera

input in question.

INSTALLATION

Remark: When the system configuration is altered, the system

monitor needs to check and memorize the configuration of the

cameras and accessories connected to its inputs.

This is done automatically when the power is switched on. Use the

power switch to switch off. Operating the power save key is not

sufficient.

If switching off is impracticable, use the auto install option of the

system monitor's install menu.

Mounting the box

1. Loosen the screw holding the cover and remove the cover.

2. Remove the circuit board1.

3. Fasten the bottom plate of the box with two screws.

CL 66610005_501.AI

Bosch Security Systems | 2004-06

EN | 7

7902 - 7905 | Installation and Operational Manual

4. Fit the circuit board.

5. Now make the connections as described in section 'Action

output'.

Remark: See section 'Installation and setting of an optional

Passive Infra-Red (PIR) detector', for installation and

connection of an PIR-detector.

6. IMPORTANT: Adjust the settings of the circuit board switches to

configure the box according to your system. See section 'settings'.

7. Fit the cover and secure the screw holding it.

Installation and setting of an optional Passive

Infra-Red (PIR) detector

Location of the PIR

The position of the PIR determines its view.

Select a location where an eventual burglar is most likely to be

detected.

Place the sensor at a height of ± 2.2 m to accomplish the largest field

of view (see figure below).

Sensor range (lens position 0°)

13.15Ft

26.3Ft

14M

46Ft

2.2M

7.2Ft

110

Side view Top view

Bosch Security Systems | 2004-06

EN | 8

7902 - 7905 | Installation and Operational Manual

Be aware of the following before mounting the PIR:

• Avoid a location of the PIR near to radiators, heating/cooling

ducts or air conditioners.

• Do not point the sensor's field of view to windows subject to

direct sunlight or drafts.

• Do not block the sensor's field of view by placing large objects in

its line of sight (e.g. curtains, potted plants, furniture).

Installation of the PIR

1. Remove the fixation-screw (1) and open the housing by releasing

the locking latch (2). Both are located at the bottom of the unit.

2. Remove the circuit board by loosening the fixation-screw (1).

3. Knock out the desired mounting holes (1) and wiring holes (2) in

the bottom plate.

4. Thread the wires through the knocked out wiring hole(s).

5. Fasten the bottom plate with two screws, using the mounting

holes.

6. Fit the circuit board.

WARNING:

Never touch the face of the PYRO sensor (refer to lay out

drawing next page).

CL 76610006_002.AI

CL 76610006_003.AI

1 2

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Bosch Sistema di sicurezza

Bosch

Bosch AP1-T Manuale utente

Bosch

Bosch DB-CO Manuale utente

Bosch

Bosch OD850F1 Manuale operativo e di manutenzione

Bosch

Bosch DIP-6083-8HD Manuale utente

Bosch

Bosch Solution 16plus Manuale utente

Bosch

Bosch DIP-3042-2HD Manuale utente

Bosch

Bosch MIC-9502 Manuale utente

Bosch

Bosch PR111B Manuale utente

Bosch

Bosch PAVIRO Istruzioni per il montaggio

Bosch

Bosch ODU-FA Manuale di istruzioni

Bosch

Bosch ICP-MAP5000-2 Manuale utente

Bosch

Bosch BE 300 LSN Manuale utente

Bosch

Bosch D1255RB Manuale utente

Bosch

Bosch BRS Manuale utente

Bosch

Bosch PRAESENSA Come usare

Bosch

Bosch PR109B Manuale utente

Bosch

Bosch LTC 9441 Series Manuale utente

Bosch

Bosch AVIOTEC IPSTARLIGHT 8000 Manuale utente

Bosch

Bosch CP050B Come usare

Bosch

Bosch NDA-U-PA0 Manuale utente

Bosch

Bosch Dinion LTC 0385 Manuale utente

Bosch

Bosch D220 Manuale utente

Bosch

Bosch ICP-VR8488 Manuale utente

Bosch

Bosch DS7400XiV4-EXP Manuale utente

Manuali Sistema di sicurezza popolari di altre marche

Inner Range

Inner Range Concept 2000 Manuale utente

Climax

Climax Mobile Lite R32 Istruzioni per il montaggio

CADDX

CADDX NX-6 Manuale utente

FBII

FBII XL-31 Series Manuale utente

Johnson Controls

Johnson Controls PENN Connected PC10 Manuale utente

Aeotec

Aeotec Siren Gen5 Manuale utente

Blaupunkt

Blaupunkt SA 2700 Manuale utente

IDEAL

IDEAL Accenta Manuale del proprietario

AJAX

AJAX DoubleButton Manuale utente

Swann

Swann SW-P-MC2 Manuale utente

Ecolink

Ecolink Siren+Chime Manuale utente

Digital Monitoring Products

Digital Monitoring Products XR150 Manuale utente

EDM

EDM Solution 6+6 Wireless-AE Manuale utente

Highway Safety Group

Highway Safety Group EA401 Manuale utente

Siren

Siren LED GSM Manuale utente

Detection Systems

Detection Systems 7090i Istruzioni per il montaggio

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuale utente

Siemens

Siemens FDM273 Manuale utente