BOSER Technology Celeron 370 Manuale utente
HS-6039
Socket 370 Celeron
™
/FC-PGA
• CRT/Panel•Dual Display•Dual LAN•133MHz FSB•SCSI•PC/104•
• WDT•DOC•USB•IrDA•Hardware Monitor•
• PICMG Industrial Single Board Computer•
HS-6039LV
Socket 370 Celeron
™
/FC-PGA
•CRT/Panel•Dual Display•LAN•133MHz FSB•SCSI•PC/104•
• WDT•DOC•USB•IrDA•Hardware Monitor•
PICMG Industrial Single Board Computer•
Copyrights
This manual is copyrighted and all rights are reserved. It is not allow any non
authorization in copied, photocopied, translated or reproduced to any electronic or
machine readable form in whole or in part without prior written consent from the
manufacturer.
In general, the manufacturer will not be liable for any direct, indirect, special,
incidental or consequential damages arising from the use of inability to use the
product or documentation, even if advised of the possibility of such damages.
The manufacturer keeps the rights in the subject to change the contents of this
manual without prior notices in order to improve the function design, performance,
quality and reliability. The author assumes no responsibility for any errors or
omissions, which may appear in this manual, nor does it make a commitment to
update the information contained herein.
Trademarks
BOSER is a registered trademark of BOSER Technology Co., Ltd.
ISB is a registered trademark of BOSER Technology Co., Ltd.
Intel is a registered trademark of Intel Corporation.
Award is a registered trademark of Award Software, Inc.
All other trademarks, products and or product's name mentioned herein are
mentioned for identification purposes only, and may be trademarks and/or registered
trademarks of their respective companies or owners.
© Copyright 2001
All Rights Reserved.
User Manual edition 1.2, March 06 2003
Contents •i
Contents
HS-6039 ......................................................................................................1
HS-6039LV....................................................................................................
GENERAL INFORMATION .............................................................................3
1.1 MAJOR FEATURES .....................................................................................4
1.2 SPECIFICATIONS.........................................................................................5
1.3 DELIVERY PACKAGE...................................................................................6
HARDWARE INSTALLATION ........................................................................8
2.1 CAUTION OF STATIC ELECTRICITY.............................................................8
2.2 CAUTION ON UNPACKING AND BEFORE INSTALLATION .............................9
2.3 HS-6039’S LAYOUT.................................................................................10
2.4 QUICK LISTING OF JUMPERS ...................................................................11
2.5 QUICK LISTING OF CONNECTORS ............................................................12
2.6 JUMPER SETTING DESCRIPTION..............................................................13
2.7 SETTING THE CPU HOST CLOCK FREQUENCY.......................................14
2.8 SETTING THE RTC CONFIGURATION.......................................................14
2.9 SYSTEM MEMORY DRAM........................................................................14
2.10 WATCH-DOG TIMER...............................................................................15
2.11 SCSI CONTROLLER...............................................................................17
2.12 VGA CONTROLLER................................................................................18
2.13 DISKONCHIPADDRESS SETTING.......................................................22
2.14 CPU TEMPERATURE ALARM .................................................................22
CONNECTION .................................................................................................23
3.1 POWER AND FAN CONNECTORS ............................................................23
3.2 IDE'S LED, KEYLOCK AND RESET BUTTON............................................24
3.3 EXTERNAL SPEAKER................................................................................25
3.4 PCI E-IDE DRIVE CONNECTOR ..............................................................26
3.5 PARALLEL PORT CONNECTOR.................................................................28
3.6 THE FLOPPY DISK DRIVE CONNECTOR ...................................................29
3.7 SERIAL PORTS CONNECTORS .................................................................30
3.8 KEYBOARD CONNECTORS .......................................................................30
3.9 PS/2 MOUSE 6PIN MINI DIN CONNECTOR ..............................................31
3.10 IR CONNECTOR .....................................................................................31
3.11 USB PORTS CONNECTOR.....................................................................32
3.12 LAN INTERFACE CONNECTOR ..............................................................32
ii •Contents
3.13 ULTRAⅡSCSI INTERFACE CONNECTOR ..............................................34
3.14 PC/104 BUS CONNECTION....................................................................35
AWARD BIOS SETUP....................................................................................37
4.1 MAIN MENU ..............................................................................................38
4.2 STANDARD CMOS SETUP.......................................................................39
4.3 BIOS FEATURES SETUP..........................................................................40
4.4 CHIPSET FEATURES SETUP .....................................................................41
4.5 INTEGRATED PERIPHERALS .....................................................................42
4.6 POWER MANAGEMENT SETUP.................................................................44
4.7 PNP/PCI CONFIGURATION SETUP ..........................................................45
SOFTWARE UTILITIES .................................................................................46
5.1 VGA DRIVER INSTALL FOR WIN95&98....................................................47
5.2 VGA DRIVER INSTALL FOR WIN NT4.0 ..................................................51
5.3 NETWORK DRIVER INSTALL FOR WIN 95&98 .........................................54
5.4 NETWORK DRIVER INSTALL FOR WIN NT4.0..........................................57
5.5 ULTRA II SCSI INSTALL FOR WIN95&98 .................................................59
5.6 ULTRA II SCSI INSTALL FOR WIN NT4.0.................................................62
3
Chapter-1
General Information
The HS-6039 is a 100MHz system clock provides up to 133MHz PICMG Bus
Socket 370 for Intel®Celeron™/CoppermineTM Industrial Single Board CPU
Card with features combine together to make it an ideal all-in-one industrial
single board computer, enhanced I/O effects with LAN and CRT/Panel
interface and Ultra II SCSI interface.
With on board DMA33 of Mode 3/4 to IDE disk drive interface architecture,
the HS-6039 supports with maximum 33MB/sec in data transfer rating to two
IDE disk drive connections.
On board 4MB Intel® 69030 CRT/Panel display controller provides up to 1280
x 1024 64K colors resolution. And it also provides one internal 50pin
connector for carious type of the Panel connection.
The advanced PICMG Bus add on connection of HS-6039 allows user could
easily obtain both ISA’s 16bit and PCI’s 32bit full set signals from a full-size
PICMG slot for suitable plug into a any size system with 8/16/32bit ISA and
PCI slots operating. The HS-6039 provides with four DIMM sockets provides
up to 1GB of main system memory.
A single Flash chip holds the system BIOS, and you can easy update the
Flash BIOS by the Utility Update. Advanced USB and IR ports also provide
for faster and easily in data transmission. You can also use the DOS version
of the DiskOnChip™socket by issuing commands from the DOS prompt
without the necessity of other software supports up to 144MB.
The HS-6039 features include Dual Intel® 82559 100 Based LAN design on
board. With two RJ-45 and two 10pin header connector provides an easily for
user’s LAN application.
If a non-expect program cause halts, the on board Watch-Dog Timer will
automatically Reset the COU or generate an interrupt. The Watch-Dog is
designed with hardware only and doesn’t need any arithmetical functions of
a real-time clock chip. This ensures the reliability in an unmanned or
standalone system.
4
1.1 Major Features
Socket 370 for Intel®CeleronTM/CoppermineTM 266~933MHz CPU
Four DIMM sockets provides up to 1GB (Only for PCB v1.3)
Fast PCI DMA33 controller supports four IDE disk drives
100MHz system clock provides up to 133MHz
Two RS-232 serial ports include 16C550 UART with 16byte FIFO
One enhanced bi-directional parallel port supports SPP/ECP/EPP
On board PS/2 Keyboard and PS/2 Mouse connector
On board Winbond W83977 super I/O chipset
On board 69030 CRT/Panel Dual display controller
On board Dual Intel® 82559 100 Based LAN
On board Symbios 53C895 Ultra II SCSI
On board PCI Bridge
DiskOnChip memory size up to 144MB
PC/104 Bus connector
ATX Power Function support
Hardware Monitor support
5
1.2 Specifications
CPU：Socket 370 for Intel® CeleronTM/CoppermineTM
266~933MHz CPU
Bus Interface：PICMG Bus
Bus Clock Rate：100MHz system clock provides up to 133MHz
Memory：Four DIMM sockets provides up to 1GB (Only for PCB
v1.3)
Chipset：Intel®82443BX
I/O Chipset：Winbond W83977
PCI Bridge：Intel®21152 or equivalent device
VGA：69030 with 4MB memory support CRT/Panel display
controller
IDE：Four IDE disk drives support DMA33 transfer rate up to
33MB/sec
Floppy：Support up to two floppy disk drives
Parallel Port：Support SPP/ECP/EPP
Dual LAN：Dual Intel®82559 100 Based LAN
SCSI：Symbios 53C895 Ultra II SCSI
Serial Port：Two RS-232 serial ports include 16C550 UART with
16byte FIFO
PC/104：PC/104 connector for 16bit ISA Bus
IR：One IrDA TX/RX header
USB：Support two USB ports
Keyboard：PS/2 6pin Mini Din or 5pin connector
6
Mouse：PS/2 6pin Mini Din or 4pin header
DiskOnChip：Socket for DiskOnChip and memory size up to
144MB
BIOS：Award Y2K PnP Flash BIOS
Watch-Dog Timer：Set 1, 2, 10, 20, 110, 220 seconds activity
trigger with Reset or NMI
CMOS：DS12C887 or equivalent device
DMA Channels：7
Interrupt Levels：15
Maximum Power Consumption：+5V@8A(933MHz)、
+12V@120mA、-12V@50mA
Operating Temperature：0~60℃
Hardware Monitor：W83783S
Board Size：13.26”(L)x4.8”(W)
1.3 Delivery Package
7
The delivery package of HS-6039 includes all following items:
One HS-6039 Industrial Single Board
One Printer Ports Bracket Flat Cable
One com port Bracket Flat Cable
Two IDE port Flat Cable
One FDD port Flat Cable
Utility CD
User’s Manual
Please contact with your dealer if any of these items are missing or
damaged when purchasing. And please keep all parts of the
delivery package with packing materials in case of you want to ship
or store the product in feature.
8
Chapter-2
Hardware Installation
This chapter provides the information on how to install the hardware
of HS-6039. At first, please follow up sections 1.3, 2.1 and 2.2 in
check the delivery package and carefully unpacking. Following
after, the jumpers setting of switch, Watch-Dog Timer and the
DiskOnChipaddress selection etc.
2.1 Caution of Static Electricity
The HS-6039 has been well package with an anti-static bag in
protect its sensitive computer components and circuitry from the
damage of static electric discharge.
Note: DO NOT TOUCH THE BOARD OR ANY OTHER
SENSITIVE COMPONENTS WITHOUT ALL NECESSARY
ANTI-STATIC PROTECTION.
You should follow the steps as following to protect the board in
against the static electric discharge whenever you handle the
board:
1. Please use a grounding wrist strap on whoever needs to handle
the HS-6039. Well clip the ALLIGATOR clip of the strap to the end
of the shielded wire lead from a grounded object. Please put on
and connect the strap before handle the HS-6039 for harmlessly
discharge any static electricity through the strap.
2. Please use anti-static pad for put any components or parts or
tools on the pad whenever you work on them outside the
computer. You may also in use the anti-static bag instead the
pad. Please ask from your local supplier in help up your
necessary parts on anti-static requirement.
Questo manuale è adatto per i seguenti modelli
3
Indice
Altri manuali BOSER Technology Hardware per computer
BOSER Technology
BOSER Technology HS-4706 Manuale utente
BOSER Technology
BOSER Technology HS-4703 Manuale utente
BOSER Technology
BOSER Technology BBS-1080S Manuale utente
BOSER Technology
BOSER Technology HS-7005 Manuale utente
BOSER Technology
BOSER Technology HS-4700 Manuale utente
BOSER Technology
BOSER Technology HS-4650 Manuale utente
BOSER Technology
BOSER Technology HS-1746 Manuale utente
BOSER Technology
BOSER Technology RC-741 Manuale utente
Manuali Hardware per computer popolari di altre marche
EMC2
EMC2 VNX Series Manuale del proprietario
Panasonic
Panasonic DV0PM20105 Manuale utente
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manuale utente
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manuale utente
Raidon
Raidon iT2300 Manuale utente
National Instruments
National Instruments PXI-8186 Manuale utente
