BOSER Technology HS-6237 Manuale utente
HS-6237/6637
BX Celeron
™
/ Coppermine
™
VGA LAN
•Half Size•All in one•CRT/Panel•LAN•
•WDT•DOC•USB•IrDA•CTA•PC/104•
•PISA/ISA Bus Industrial Single Board computer•
HS-6237V/6637V
BX Celeron
™
/ Coppermine
™
VGA
•Half Size•All in one•CRT/Panel•
•WDT•DOC•USB•IrDA•CTA•PC/104•
•PISA/ISA Bus Industrial Single Board computer•
Copyrights
This manual is copyrighted and all rights are reserved. Any kind of reproduction in
whole or in part without prior written consent from the manufacturer is prohibited.
In general, the manufacturer will not be liable for any direct, indirect, special,
incidental or consequential damages arising from the use of inability to use the
product or documentation, even if advised of the possibility of such damages.
Themanufacturerreserves the right to change the contents of this manual without
prior notice in order to improve the function design, performance, quality and
reliability.Theauthorassumesnoresponsibilityforanyerrorsoromissions,which
may appear in this manual, nor does it make a commitment to update the
information contained herein.
Trademarks
BOSER is a registered trademark of BOSER Technology Co., Ltd.
ISB is a registered trademark of BOSER Technology Co., Ltd.
Intel is a registered trademark of Intel Corporation.
AWARD is a registered trademark of AWARD International Inc.
All other trademarks, products and or product's name mentioned herein are
mentioned for identification purposes only, and may be trademarks and/or
registered trademarks of their respective companies or owners.
© Copyright 2000
All Rights Reserved.
User Manual edition 2.3, Aug.24 2001
Contents?i
Contents
HS-6237/6637.........................................................................................................1
HS-6237V/6637V...................................................................................................1
GENERAL INFORMATION ..................................................................3
1.1 MAJOR FEATURES ........................................................................4
1.2 SPECIFICATIONS............................................................................5
1.3 DELIVERY PACKAGE......................................................................7
HARDWARE INSTALLATION..............................................................8
2.1 CAUTION OF STATIC ELECTRICITY .....................................................8
2.2 CAUTION ON UNPACKING AND BEFORE INSTALLATION............................9
2.3 HS-6237/HS-6637’S LAYOUT ...................................................... 10
2.4 QUICK LISTING OF JUMPERS ........................................................... 11
2.5 QUICK LISTING OF CONNECTORS..................................................... 12
2.6 JUMPER SETTING DESCRIPTION ....................................................... 13
2.7 SETTING THE BUS-CLOCK FREQUENCY............................................. 14
2.8 SETTING THE RTC CONFIGURATION................................................. 14
2.9 SYSTEM MEMORY DRAM............................................................. 14
2.10 WATCH-DOG TIMER................................................................... 15
2.11DISKONCHIP?ADDRESS SETTING................................................. 17
CONNECTION.................................................................................. 18
3.1 POWER AND FAN CONNECTORS .................................................... 18
3.2 IDE'S LED, KEYLOCK AND RESET BUTTON ...................................... 19
3.3 EXTERNAL SPEAKER.................................................................... 20
3.4 PCI E-IDE DRIVE CONNECTOR...................................................... 21
3.5PARALLEL CONNECTOR................................................................ 22
3.6 THE FLOPPY DISK DRIVE CONNECTOR.............................................. 23
3.7 SERIAL PORTS CONNECTORS ........................................................ 24
3.8 KEYBOARD CONNECTORS............................................................. 25
3.9 PS/2 6PIN MINI DIN MOUSE CONNECTOR.......................................... 25
3.10 VGA CONTROLLER ................................................................... 26
3.11 IR CONNECTOR......................................................................... 29
3.12 USB CONNECTOR..................................................................... 29
3.13 LAN INTERFACE CONNECTOR....................................................... 30
3.14 PC/104 BUS CONNECTOR .......................................................... 31
ii ?Contents
AWARD BIOS SETUP ...................................................................... 33
4.1 MAIN MENU............................................................................... 34
4.2 STANDARD CMOS SETUP............................................................ 35
4.3 BIOS FEATURES SETUP............................................................... 36
4.4 CHIPSET FEATURES SETUP............................................................ 37
4.5 INTEGRATED PERIPHERALS............................................................ 38
4.6 POWER MANAGEMENT SETUP........................................................ 40
4.7 PNP/PCI CONFIGURATION SETUP................................................... 41
SOFTWARE UTILITIES .................................................................... 42
5.1 VGA DRIVER INSTALL FOR WIN95 & WIN98................................... 43
5.2 VGA DRIVER INSTALL FOR WIN NT4.0........................................... 46
5.3 LANDRIVER INSTALL FOR WIN95 & WIN98.................................... 50
5.4 LANDRIVER INSTALL FOR WIN NT4.0............................................ 53
3
Chapter-1
General Information
TheHS-6237/HS-6637isa100MHz BusIntel®BX chipset design PISA/ISA
Bus Celeron™/Coppermine™(Coppermine™ only for Ver2.1 PCB)
Industrial Single Board Computer with features combine together to make
itanidealall-in-one industrial single board computer, enhanced I/O effects
with LAN and CRT/Panel interface.
With on board DMA33 of mode 4 to IDE drive interface architecture, the
HS-6237/HS-6637 supports with maximum 33.3 MB/sec in data transfer
rating to one IDE drive connection. Design with Intel®82443 BX core logic
chipsetsupportsallseriesCeleron™/Coppermine™ operating at 266MHz
to800MHz.The on board 69000 CRT/Panel display controller supports up
to 1280x1024x256 colors display resolution. And it also provides one
internal 50pin connector for various type of the Panel connection.
The advanced PISA bus add-on connection of HS-6237 allows user could
easilyobtainboth ISA's 16bitandPCI's32bit full setsignalsfroma half size
PISA slot for suitable plug into any size system with 8/16/32bit ISA and-or
PCI slots operating. The HS-6237/HS-6637 provides with two DIMM
sockets support up to 512 MB of main system memory.
A single Flash chip holds the system BIOS, and you can easy update the
Flash BIOS by the Utility Update. Advanced USB and IR ports also provide
for faster and easily in data transmission. You can also use the DOS
version of the "DiskOnChip?" socket by issuing commands from the DOS
prompt without the necessity of other software supports up to 144MB.
The HS-6237/HS-6637 features include one Intel®82558 10/100 Based
LANdesignonboard.With one external RJ45 connector provides aneasily
for user’s LAN application.
If a non-expect program cause halts, the on board Watch-Dog Timer will
automaticallyresettheCPUorgenerateaninterrupt.TheWatch-Dog Timer
isdesignedwithhardwareonlyanddoesn’tneedanyarithmeticalfunctions
of a real-time clock chip. This ensures the reliability in an unmanned or
4
standalone system.
1.1 Major Features
?? PISA Bus (HS-6237) and ISA Bus (HS-6637) supported
?? Socket 370 for Intel®CeleronTM/CoppermineTM 266~800MHz CPU
?? Two DIMM sockets provides up to 512MB
?? Fast PCI DMA33 controller supports two IDE disk drives
?? PnP I/O address & IRQ selection
?? Two RS-232 serial ports include 16C550 UART with 16byte FIFO
?? One enhanced bi-directional parallel port supports SPP/ECP/EPP
?? On board PS/2 Keyboard and PS/2 Mouse connector
?? On board Winbond W83977 super I/O chipset
?? On board 69000 CRT/Panel display controller
?? On board Intel®82558 10/100 Based LAN
?? DiskOnChip memory size up to 144MB
?? PC/104 Bus connector
?? CPU Temperature Alarm support
*It will be a Warning “beep” come out if the CPU’s temperature reached 60
℃. And it will stop as the CPU’s temperature going down below 60℃
again.
5
1.2 Specifications
??CPU：Socket 370 for Intel®CeleronTM/CoppermineTM 266~800MHz
CPU
??Bus Interface：PISA Bus (HS-6237) / ISA Bus (HS-6637)
??Memory：Two DIMM sockets provides up to 512MB
??Chipset：Intel®82443BX
??I/O Chipset：Winbond W83977
??VGA：69000 with 2MB memory support CRT/Panel display up to
1280x1024x256colors
??IDE：Two IDE disk drives support DMA33 transfer rate up to 33MB/sec
??Floppy：Support up to two floppy disk drives
??Parallel Port：Support SPP/ECP/EPP
??LAN：Intel®82558 10/100 Based LAN
??Serial Port：Two RS-232 serial ports include 16C550 UART with
16byte FIFO
??PC/104：PC/104 connector for 16bit ISA Bus
??IR：One IrDA TX/RX header
??USB：Support two USB ports
??Keyboard：PS/2 6pin Mini Din or 5pin connector
??Mouse：PS/2 6pin Mini Din
??DiskOnChip：Socket for DiskOnChip and memory size up to 144MB
??BIOS：Award Y2K PnP Flash BIOS
6
??Watch-Dog Timer：Set 1, 2, 10, 20, 110, 220 seconds activity trigger
with Reset or NMI
??CMOS：DS12C887 or equivalent device
??DMA Channels：7
??Interrupt Levels：15
??Extra Power：One 10pin +5V/+12V connector
??Maximum Power Consumption：+5V@5A、+12V@120mA
??Operating Temperature：0~60°C
??CPU Temperature Alarm：Beeping alarm when CPU’s temperature
over heating limited
??Board Size：7.3”(L) x 4.8”(W)
7
1.3 Delivery Package
The delivery package of HS-6237/HS-6637 includes all following
items:
?? One HS-6237/HS6637 Industrial Single Board Computer
?? One Printer Ports Bracketed Flat Cable
?? One COM port Bracketed Flat Cable
?? One IDE port Flat Cable
?? One FDD port Flat Cable
?? One PS/2 to Standard type Keyboard Transfer Cable
?? Utility CD-ROM
?? User’s Manual
Please contact with your dealer if any of these items are missing or
damaged when purchasing. And please keep all parts of the delivery
package with packing materials in case of you want to ship or store
the product in feature.
8
Chapter-2
Hardware Installation
This chapter provides the information on how to install the hardware of
HS-6237/6637. At first, please follow up sections 1.3, 2.1 and 2.2 in
check the delivery package and carefully unpacking. Following after,
the jumpers setting of switch, watchdog timer and the DiskOnChip?
address selection etc.
2.1 Caution of Static Electricity
The HS-6237/6637 has been well package with an anti-static bag in
protect its sensitive computer components and circuitry from the
damage of static electric discharge.
Note: DO NOT TOUCH THE BOARD OR ANY OTHER SENSITIVE
COMPONENTS WITHOUT ALL NECESSARY ANTI-STATIC
PROTECTION.
You should follow the steps as following to protect the board in against
the static electric discharge whenever you handle the board:
1. Please use a grounding wrist strap on whoever needs to handle the
HS-6237/6637. Well clip the ALLIGATOR clip of the strap to the end
of the shielded wire lead from a grounded object. Please put on and
connect the strap before handle the HS-6237/6637 for harmlessly
discharge any static electricity through the strap.
2. Please use anti-static pad for put any components or parts or tools
on the pad whenever you work on them outside the computer. You
may also in use the anti-static bag instead the pad. Please ask from
your local supplier in help up your necessary parts on anti-static
requirement.
Questo manuale è adatto per i seguenti modelli
3
Indice
Altri manuali BOSER Technology Scrivania
