Boser HS-6010 Manuale utente
HS-6010
Pentium
®
-II Bus-100MHz VGA
•Full Size•All-in-one•PC/104•VGA CRT Interface•
•Supports DMA33•WDT•DOC•USB•IrDA•
•PICMG Bus Industrial Single Board Computer•
HS-6010P
BX-LEVEL Pentium
®
-II I.S.B.
•Full Size•All-in-one•PC/104•
•Supports DMA33•WDT•DOC•USB•IrDA•
•PICMG Bus Industrial Single Board Computer•
Copyrights
This manual is copyrighted and all rights are reserved. It is not allow any non authorization in
copied, photocopied, translated or reproduced to any electronic or machine readable form in
whole or in part without prior written consent from the manufacturer.
In general, the manufacturer will not be liable for any direct, indirect, special,
incidental or consequential damages arising from the use of inability to use the
product or documentation, even if advised of the possibility of such damages.
The manufacturer keeps the rights in the subject to change the contents of this
manual without prior notices in order to improve the function design, performance,
quality and reliability. The author assumes no responsibility for any errors or
omissions, which may appear in this manual, nor does it make a commitment to
update the information contained herein.
Trademarks
BOSER is a registered trademark of BOSER Technology Co., Ltd.
Award is a registered trademark of Award Software, Inc.
ISB is a registered trademark of BOSER Technology Co., Ltd.
All other trademarks, products and or product's name mentioned herein are
mentioned for identification purposes only, and may be trademarks and/or
registered trademarks of their respective companies or owners.
© Copyright 1999
All Rights Reserved.
User Manual edition 1.2, Aug.24 2001
Contents?i
Contents
HS-6010...................................................................................................................1
HS-6010P................................................................................................................1
GENERAL INFORMATION.........................................................................................3
1.1 MAJOR FEATURES..................................................................................................4
1.2 SPECIFICATIONS ......................................................................................................5
1.3 DELIVERY PACKAGE..............................................................................................7
HARDWARE INSTALLATION...................................................................................8
2.1 CAUTION OF STATIC ELECTRICITY........................................................................8
2.2 CAUTION ON UNPACKING AND BEFORE INSTALLATION......................................9
2.3 HS-6010’S LAYOUT............................................................................................10
2.4 QUICK LISTING OF JUMPERS.................................................................................11
2.5 QUICK LISTING OF CONNECTORS ........................................................................11
2.6 JUMPER SETTING DESCRIPTION............................................................................13
2.7 SETTING THE BUS-CLOCK FREQUENCY .............................................................14
2.8 FREQUENCY MULTIPLIER SETTING......................................................................14
2.9 SETTING THE RTC CONFIGURATION...................................................................15
2.10 SYSTEM MEMORY DRAM................................................................................15
2.11 ATX/AT POWER SELECT..................................................................................15
2.12 WATCH-DOG TIMER...........................................................................................16
2.13 PCI VGA CONTROLLER...................................................................................18
2.14 DISKONCHIP?ADDRESS SETTING..................................................................18
CONNECTION..............................................................................................................19
3.1 POWER AND FAN CONNECTORS .......................................................................19
3.2 IDE'S LED, KEY-LOCK AND RESET BUTTON...................................................20
3.3 EXTRA SPEAKER CONNECTOR............................................................................20
3.4 PCI E-IDE DRIVE CONNECTOR..........................................................................21
3.5 PS/2 POWER ON/OFF CONTROL....................................................................23
3.6 PARALLEL PORT CONNECTOR............................................................................23
3.7 THE FLOPPY DISK DRIVE CONNECTOR...............................................................24
3.8 SERIAL PORTS CONNECTORS.............................................................................25
3.9 KEYBOARD CONNECTORS...................................................................................26
ii ?Contents
3.10 PS/2 MOUSE 6-PIN MINI-DIN CONNECTOR....................................................26
3.11 VGA-CRT CONNECTOR....................................................................................27
3.12 IR CONNECTOR...................................................................................................28
3.13 USB PORTS CONNECTOR................................................................................28
AWARD BIOS SETUP...............................................................................................29
4.1 MAIN MENU...........................................................................................................30
4.2 STANDARD CMOS SETUP..................................................................................31
4.3 BIOS FEATURES SETUP......................................................................................32
4.4 CHIPSET FEATURES SETUP..................................................................................33
4.5 INTEGRATED PERIPHERALS..................................................................................34
4.6 POWER MANAGEMENT SETUP............................................................................35
3
Chapter-1
General Information
The HS-6010 is a bus-100MHz ALi®BX-Level chipset design PICMG bus
Pentium®II Industrial Single Board (I.S.B.) CPU card with features combine
together to make it an ideal all-in-one industrial single board computer,
enhanced I/O effects with VGA interface on-board.
The HS-6010 also provides one set of PC/104 bus for 8/16-bit industrial
application with based on PC/104 standard bus.
With onboard DMA33 of mode 4 to IDE drive interface architecture, the
HS-6010 supports with maximum 33.3 MB/sec in data transfer rating to 4
piecesIDEdriveconnection.Design with ALi™ M1621BX-Level core logic
chipset supports all series Pentium®II operating at 233MHz, 266MHz,
300MHz, 333MHz, 400MHz and 450MHz. The on-board S3®86C375VGA
chipset supports up to 1280 x 1024 256 colors display resolution. And
it also provides one extra 10-pin connector for internal VGA connection.
The advanced PICMG bus add-on connection of HS-6010 allows user
couldeasilyobtainboth ISA's 16-bit and PCI's 32-bit full set signals from a
fullsize PICMG slotforsuitableplugintosystemwith8/16/32-bit ISA and-or
PCIslotsoperating.TheHS-6010provideswiththree pieces 168-pinDIMM
sockets support up to 1.5GBytes of main system memory.
A single Flash chip holds the system BIOS, and you can easy update the
Flash BIOS by the Utility Update. Advanced USB and IR ports also provide
for faster and easily in data transmission. You can also use theDOS
version of the "DiskOnChip?" socket by issuing commands from the DOS
prompt without the necessity of other software supports up to 144MB.
If a non-expect program cause halts, the onboard watchdog timer will
automatically reset the CPU or generate an interrupt. The watchdog is
designedwithhardwareonlyanddoesn’tneedanyarithmeticalfunctionsof
a real-time clock chip. This ensures the reliability in an unmanned or
4
standalone system.
1.1 Major Features
?? PICMG bus supported.
?? PC/104 bus connector for 8/16-bit supported.
?? One axial-horizontal type Slot-1 socket for Intel™ Pentium®II 233∼
450 MHz Processors.
?? ALi™ M1621 BX-Level chipset.
?? Three pieces DIMM sockets supports DRAM up to 768 MB.
?? Fast PCI DMA33 controller supports four IDE drives include large hard
disks, CD-ROM and tape backup etc.
?? PnP I/O address & IRQ selection
?? Two high-speed RS-232 serial ports with 16C550 UART 16-byte
FIFO.
?? One enhanced bi-directional parallel port supports SPP/EPP/ECP.
?? On-board PS/2 Keyboard and PS/2 Mouse connector.
?? On-board S3®86C375 SVGA adapter.
?? DiskOnChip?Socket supports memory size up to 144 MB.
?? On-board two USB ports and one IrDA port.
?? Build-in one industrial WDT Watch-Dog-Timer.
?? AWARD PnP Y2K Flash BIOS.
5
1.2 Specifications
??CPU: One piece ALi™ Pentium®II 233/266/300/333/400/450MHz.
??Bus interface: PICMG bus, PC/104 bus.
??Chipset: ALi™ M1621 BX-Level with bus-100MHz facility.
??Data bus: 64-bit
??Processing ability: 64-bit
??SVGA Controller: S3®86C375 chipset with 2MB memory supports
CRT up to 1280x1024 256 colors. Provides internal 10-pin VGA
connector.
??PCI Enhanced IDE Interfaces: Supports four IDE drives modes 3&4
with DMA33 function provide data transfer rate up to 33MB/Sec.
??RAM memory: Three pieces 168-pin DIMM sockets provide up to 768
MBytes.
??Cache memory: Slot-1 socket supports Intel's Pentium®II CPU with
build-in 512KB Pipeline burst cache memory.
??Floppy disk drive interface: Supports up to two floppy disk drives.
??Parallel port: One bi-directional parallel port. Supports
SPP/ECP/EPP.
??Serial ports: Two RS-232 ports. Both use 16C550 UART with 16-byte
FIFO.
??BIOS: AWARD PnP Y2K Flash BIOS.
??Watchdog timer: Hardware circuit can be set by 1, 2, 10, 20, 110, or
220 seconds period Reset or NMI were generated when CPU did not
periodically trigger the timer.
??DMA channels: 7
6
??Interrupt levels: 15
??Keyboard: 6-pin mini DIN connector or 5-pin header supports standard
PC/AT keyboard.
??Mouse: 6-pin mini DIN connector support PS/2 type mouse.
??USB: Supports 2 USB header.
??IR interface: Supports one lrDA TX/RX header.
??Flash memory Disk: Socket for DiskOnChip™ (DOC), support up to
72MB Flash memory disk.
??Extra Power Input: Provides one 4-PIN extra DC +5V/+12V power
input connector.
??CMOS:Real-time clock/calendar and battery backup by DS12B887 or
equivalent device.
??Power supply voltage: +5V (4.75 to 5.25V), +12V, -12V.
??Max. Power requirement: +5V @4A(266MHz), +12V@20mA,
-12V@20mA.
??Operating temperature: 0-55°C (CPU need cooler)
??Board size: 13.26"(L) x 4.8" (W) (337mm x 122mm)
The HS-6010 provides with VGA Interface, supports DMA33, WDT, DOC, USB
and IrDA.
The HS-6010P provides with support DMA33/66, WDT, DOC, USB and IrDA.
(A design as HS-6010 but without VGA on-board).
7
1.3 Delivery Package
The delivery package of HS-6010 includes all following items:
?? One HS-6010 Industrial Single Board
?? One Printer & COM Ports Bracketed Flat Cable
?? Two IDE port Flat Cable
?? One FDD port Flat Cable
?? One PS/2 to Standard DIN type Keyboard Transfer Cable
?? Utility Diskette
?? User’s Manual
Please contact with your dealer if any of these items are missing or
damaged when purchasing. And please keep all parts of the delivery
package with packing materials in case of you want to ship or store
the product in feature.
8
Chapter-2
Hardware Installation
This chapter provides the information on how to install the hardware of
HS-6010. At first, please follow up sections 1.3, 2.1 and 2.2 in check
the delivery package and carefully unpacking. Following after, the
jumpers setting of switch, watchdog timer and the DiskOnChip?
address selection etc.
2.1 Caution of Static Electricity
The HS-6010 has been well package with an anti-static bag in protect
its sensitive computer components and circuitry from the damage of
static electric discharge.
Note: DO NOT TOUCH THE BOARD OR ANY OTHER SENSITIVE
COMPONENTS WITHOUT ALL NECESSARY ANTI-STATIC
PROTECTION.
You should follow the steps as following to protect the board in against
the static electric discharge whenever you handle the board:
1. Please use a grounding wrist strap on whoever needs to handle the
HS-6010. Well clip the ALLIGATOR clip of the strap to the end of the
shielded wire lead from a grounded object. Please put on and
connect the strap before handle the HS-6010 for harmlessly
discharge any static electricity through the strap.
2. Please use anti-static pad for put any components or parts or tools
on the pad whenever you work on them outside the computer. You
may also in use the anti-static bag instead the pad. Please ask from
your local supplier in help up your necessary parts on anti-static
requirement.
Indice
Altri manuali Boser Hardware per computer
Manuali Hardware per computer popolari di altre marche
EMC2
EMC2 VNX Series Manuale del proprietario
Panasonic
Panasonic DV0PM20105 Manuale utente
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manuale utente
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manuale utente
Raidon
Raidon iT2300 Manuale utente
National Instruments
National Instruments PXI-8186 Manuale utente
