Boss Audio Systems CHAOS CH3000D Manuale utente

MODEL: CH3000D

SPECIFICATIONS

Maximum power output (2 Ohms): 2200W x 1ch

RMS power Output: 1200W x 1ch

Bridged Power Output: 3000W x 1ch

Frequency response: 20 - 300Hz

S/N Ratio: 103dB

Low Pass Crossover (Variable) 20Hz-250Hz

Power Source Voltage: 14.4V

Ground: Negative

Power consumption: 25A(with 125Wx2 rated output)

External dimensions: 300(W)x65(H)x406(D)mm

- 1 -

2. Place the parts and wiring back in their original positions after replacement or

re-wiring. For proper circuit construction, use of insulation tubes, bonding, gaps to

PCB, etc, is involved. The wiring connection and routing to the PWB are specially

planned using clamps to keep away from heated and high voltage parts. Ensure that

they are placed back in their original positions after repair or inspection. If extended

damage is caused due to negligence during repair, the legal responsibility shall be

with the repairing company.

3. Check for safety after repair. Check that the screws, parts and wires are put back

securely in their original position after repair. Ensure for safety reasons there is no

possibility of secondary ploblems around the repaired spots. If extended damage is

caused due to negligence of repair, the legal responsibility shall be with the repairing

company.

4. Caution in removal and making wiring connection to the parts for the automobile.

Disconnect the battery terminal after turning the ignition key off. If wrong wiring

connections are made with the battery connected, a short circuit and/or fire may occur.

If extensive damage is caused due to negligence of repair, the legal responsibility

shall be with the repairing company.

5. Cautions regarding chips.

Do not reuse removed chips even when no abnormality is observed in their

appearance. Always replace them with new ones. (The chip parts include resistors,

capacitors, diodes, transistors, etc). The negative pole of tantalum capacitors is

highly susceptible to heat, so use special care when replacing them and check the

operation afterwards.

6. Cautions in handling flexible PCB

Before working with a soldering iron, make sure that the iron tip temperature is

around 270... Take care not to apply the iron tip repeatedly(more than three times)

to the same patterns. Also take care not to apply the tip with force.

7. Turn the unit OFF during disassembly and parts replacement. Recheck all work

before you apply power to the unit.

To engineers in charge of repair or inspection of

our products.

Before repair or inspection, make sure to follow the instructions so that customers

and Engineers in charge of repair or inspection can avoid suffering any risk or injury.

1. Use specified parts.

The system uses parts with special safety features against fire and voltage. Use only

parts with equivalent characteristics when replacing them. The use of unspecified

parts shall be regarded as remodeling for which we shall not be liable. The onus of

product liability (PL) shall not be our responsibility in cases where an accident or

failure is as a result of unspecified parts being used.

- 2 -

- 3 -

EXPLODED VEIW

- 4 -

PRINTED CIRCUIT BOARD - 1

- 5 -

CIRCUIT DIAGRAM 1

- 6 -

CIRCUIT DIAGRAM 2

- 7 -

PARTS LIST - 1

PARTS LIST - 2

- 8 -

PARTS LIST - 3

- 9 -

PARTS LIST - 4

- 10 -

Indice

Altri manuali Boss Audio Systems Amplificatore per auto

Boss Audio Systems

Boss Audio Systems AR1200.2 Manuale utente

Boss Audio Systems

Boss Audio Systems CLR-40 Manuale utente

Boss Audio Systems

Boss Audio Systems Riot GT1000M Manuale utente

Boss Audio Systems

Boss Audio Systems Diablo D1000.2 Manuale utente

Boss Audio Systems

Boss Audio Systems Riot REV-1035 Manuale utente

Boss Audio Systems

Boss Audio Systems Chaos C-1000 Manuale utente

Boss Audio Systems

Boss Audio Systems GT1500D Manuale utente

Boss Audio Systems

Boss Audio Systems Outcast OL3KD Manuale utente

Boss Audio Systems

Boss Audio Systems CHAOS CH1200M Manuale utente

Boss Audio Systems

Boss Audio Systems US140 Manuale utente

Boss Audio Systems

Boss Audio Systems Riot REV-135 Manuale utente

Boss Audio Systems

Boss Audio Systems AVA-250 Manuale utente

Boss Audio Systems

Boss Audio Systems CER1200M Manuale utente

Boss Audio Systems

Boss Audio Systems AR1200.2 Manuale utente

Boss Audio Systems

Boss Audio Systems AR4000D Manuale utente

Boss Audio Systems

Boss Audio Systems GT2500D Manuale utente

Boss Audio Systems

Boss Audio Systems Outcast OL2400 Manuale utente

Boss Audio Systems

Boss Audio Systems BE1600 Manuale utente

Boss Audio Systems

Boss Audio Systems DST2500D Manuale utente

Boss Audio Systems

Boss Audio Systems Riot GT1280 Manuale utente

Boss Audio Systems

Boss Audio Systems Chaos C3000D Manuale utente

Boss Audio Systems

Boss Audio Systems CHAOS CH1000 Manuale utente

Boss Audio Systems

Boss Audio Systems Chaos Exxtreme CX2500D Manuale utente

Boss Audio Systems

Boss Audio Systems Blade Extreme BLX3500M Manuale utente

Manuali Amplificatore per auto popolari di altre marche

Cyfre

Cyfre CHACDMA-819 Manuale utente

MTX

MTX Thunder Marine TM904 Manuale utente

MTX

MTX Thunder TA Super TA92001 Manuale di istruzioni

Lanier

Lanier 480-0239 Istruzioni operative e di manutenzione

Kenwood

Kenwood KAC-642 Manuale utente

Pioneer

Pioneer GM-D8500M Manuale utente

Jensen

Jensen XA4150 Manuale utente

Sony

Sony XM-405EQX Marketing Specifications Manuale utente

Audiopipe

Audiopipe AQX-660.2 Manuale utente

Clarion

Clarion APA2001 APA2001 APA2001 Guida rapida

Sony

Sony XM-7547 Manuale utente

Alpine

Alpine PDX11000 - Amplifier Manuale utente

Steg

Steg Qx Mos 105.4x Manuale utente

JL Audio

JL Audio HD900/5 Manuale utente

Memphis

Memphis 16-MC5.700 Manuale utente

Audiopipe

Audiopipe APSM-1150 Manuale utente

Kenwood

Kenwood KAC-PS811D Manuale utente

Fusion

Fusion CA-DA41400 Manuale utente