1. Untwist and remove the fuel cap. Rest the cap on a dustless place.
2. Put fuel into the fuel tank to 80% of the full capacity.
3. Fasten the fuel cap securely and wipe up any fuel spillage around the unit.
WARNING
1. Select bare ground for fueling.
2. Move at least 10 feet (3 meters) away from the fueling point before Starting the
engine.
3. Stop the engine before refueling the unit .At that time.be sure to sufficiently
agitate the mixed gasoline in the container.
FOR YOUR ENGINE LIFE, AVOID:
1. FUEL WITH NO OIL(RAW GASOLINE) - It will cause severe damage to the
internal engine parts very quickly.
2. GASOHOL - it can cause deterioration of rubber and or plastic parts and
disruption of engine lubrication.
3. OIL FOR 4-CYCLE ENGINE USE - it can cause spark plug fouling. exhaust
port blocking. or piston ring sticking .
4 Mixed fuels which have been left unused for a period of one month or more may
clog the carburetor and result in the engine failing to operate properly.
5 In the case of storing the product for a long period of time. clean the fuel tank
after rendering it empty.Next, activate the engine and empty the carburetor of the
composite fuel.
6 In the case of scrapping the used mixed oil container, scrap it only at an
authorized repository site.
Note: As for details of quality assurance, read the description in the section Limited
Warranty carefully. Moreover ,normal wear and change in product with no functional
influence are not covered by the warranty.Also , be careful that, if the usage in the
instruction manual is not observed as to the mixed gasoline, etc. described Therein,
it may not be covered by the warranty.
CHAIN OIL
Use motor oil SAE #10W-30 all year round or SAE
#30 - #40 in Summer and SAE #20in winter
Note: Do not use wasted or regenerated oil that can cause damage to the oil pump.
