Bosscom II Manuale utente

BOSSCOM

iPod Dock II for

B&O

(For most iPods, including Touch and iPhone)

User manual

With an iPod or iPhone inserted in the dock it can be operated and charged at the same time. When the

dock is connected to a Bang & Olufsen audio- or video system the dock’s iPod and the audio-video

system may be controlled with the same remote control, Beolink 1000, Beo4 or Beo5.

Control with Beo4 or Beo5

oo Select

o A Menu

o S Menu fw

A/ S Rew/ FF*1

D / F Up/ down

E/R Menu –select *2

q Play/ pause

o Play/ pause

(Press for 2 secs)*3

By selecting the correct source on the

Bang & Olufsen remote control terminal,

the BOSSCOM iPod Dock II is

automatically turned on.

Note !

When your iPod is inserted into the dock,

it is operable after exchanging data with

the dock within 10-15 secs.

Prev./next track when playing music.

The coloured button functionality is always

available in the Direct Mode, but not in the

CableLink Mode in all Bang & Olufsen

equipment.

This functionality is only available with Beo4

with

SW 3.0 or higher.

Control with Beolink1000

pp Select

p Z Menu

p X Menu fw

Z/ X Rew/ FF*1

C/ V Up/ down

q Play/ pause

Contents

Page

4.......................Getting Started

4.......................Direct Mode or Cable Link Mode

4.......................Factory Settings

5......................Installation

5....................Examples of Bang & Olufsen Set Ups

6......................Setting Up the BOSSCOM iPod Dock II

6......................Option Programming

7......................Source and Option Selection

12....................Setting Up the BOSSCOM iPod Dock II

12....................Setting Up for Video Output

13....................Connecting as an AV Source

13....................Specifications

Getting Started

This BOSSCOM iPod Dock II has been re-designed for operation in a Bang & Olufsen remote control

system allowing full control with a Bang & Olufsen remote control terminal either directly or via

connection to Bang & Olufsen equipment.

This dock is BeoLink compatible.

If the Bang & Olufsen system comprises one or more link rooms in a BeoLink System sound may be

distributed to these rooms, and in some cases –see below –the docked device might even be controlled

from there.

Connect the BOSSCOM iPod Dock II to a Bang & Olufsen audio or video system as any vacant audio- or

AV input source. Setting up Bang & Olufsen systems may vary, and this user guide describes how.

Direct Mode or CableLink Mode

The BOSSCOM iPod Dock II is always connected to Bang & Olufsen equipment with the 7-pin DIN-

cable, but through option programming it may be controlled as follows:

1. Via dock’s built in IR receiver, ”Direct Mode”

Direct Mode is used when connection to an input with control data is not possible.

2. Via the cable connected Bang & Olufsen equipment, ”CableLink Mode”

CableLink Mode is used when connection to an input with control data is possible.

Factory Settings

The factory setting is for control is “Direct Mode”.

The factory setting for input socket and selected source is:

·Beo4 og Beo5 N.MUSIC, A.MEM2 or.TAPE2

·Beolink 1000 SHIFT A.TAPE

If the BOSSCOM iPod Dock II is connected to a different input, the option should be programmed

accordingly. See page 6 for Option Programming

Installation

________________________________________________________________________

·Select option and complete option programming, if required

·Connect the BOSSCOM iPod Dock II to the correct input socket

·Connect power supply to the dock

·Select the source on the remote control terminal

By selecting the correct source on the Bang & Olufsen remote control terminal, the BOSSCOM

iPod Dock II is automatically turned on.

Examples of Bang & Olufsen Set Ups

Set Up for Direct Control

The Bang & Olufsen remote terminal controls both

the BOSSCOM iPod Dock II and the Bang &

Olufsen audio equipment.

When selecting the dock connected source with

the Bang & Olufsen remote the corresponding

input socket is opened, and the dock is turned on

simultaneously.

The docked iPod may be listened to in any

connected linkroom, but not controlled from there.

Set Up for CableLink Control.

The Bang & Olufsen remote terminal controls the

BOSSCOM iPod Dock II via the Bang & Olufsen

audio equipment that is transmitting control data via

the 7-pin DIN connection cable.

When selecting the dock connected source with the

Bang & Olufsen remote terminal the corresponding

input socket is opened, control data transmitted via

the connection cable and the dock is turned on.

Control data is only available via some input sockets

in various Bang & Olufsen audio equipment.

A BOSSCOM iPod Dock II connected via CableLink

may be controlled from any connected linkroom.

Set Up for CableLink Control

The BOSSCOM iPod Dock II is connected as an

AV source to an AV input in a Bang & Olufsen TV.

When selecting the dock connected source with

the Bang & Olufsen remote terminal the

corresponding AV input socket is opened, control

data transmitted via the connection cable and the

dock is turned on.

A BOSSCOM iPod Dock II connected via

CableLink may be controlled from any connected

linkroom.

Set Up for Direct Control

A BOSSCOM iPod Dock II may be connected to any

TV and with a dock in each room individual program

selection is possible- and every docked iPod is always

fully charged.

Setting up the BOSSCOM iPod Dock II for the Direct Mode using a Bang

& Olufsen Remote Control

In the Direct Mode the Bang & Olufsen remote

control signal controls both the BOSSCOM iPod

Dock II and the Bang & Olufsen equipment at the

same time.

Thus the dock must be programmed to respond to

the correct signals.

In the Direct Mode the docked iPod may be listened to

from any link room, but cannot be controlled from there.

The Direct Mode will work in any setup, but the dock’s IR-receiver is NOT plasma-safe. If there is a plasma panel in

the room, an external plasma-safe IR-receiver has to be used.

Option Programming

Option programming is required only when installing dock. The programming is performed with a Bang &

Olufsen remote control terminal by pressing a 5 button sequence within 4 seconds after powering up the

dock.

When powering up the dock the red control lights up for 4 seconds, and the programming has to take

place before the control turns blue. If not successful the operation may be repeated.

Programming starts by pressing STOP and ends by pressing RECORD. All options have 3 digits to be

entered in between.

Option 106 is entered like this:

LIGHT –1 –0 –6 - STANDBY

Source & Option Selection

The following tables show the available input sockets in various Bang & Olufsen audio and video products,

how to select them using a remote control terminal and what the corresponding option program of the

BOSSCOM iPod Dock II should be.

The BOSSCOM iPod Dock II has to be programmed with the right option to operate correctly. See page

5 and 6.

Input

Socket

Selected

Source

Direct

Option

CableLink

Option

Remarks

BeoCenter 2 AUX-IN A.AUX

SHIFT RADIO

100 - *2

Input

Socket

Selected

Source

Direct

Option

CableLink

Option

Remarks

BeoSound 4 AUX A.AUX

SHIFT RADIO

100 - *2

Input

Socket

Selected

Source

Direct

Option

CableLink

Option

Remarks

BeoSound 1 AUX A.AUX

SHIFT RADIO

100 - *3

AUX A.MEM,

ATAPE

102 - *3

Input

Socket

Selected

Source

Direct

Option

CableLink

Option

Remarks

BeoSound Century AUX N.MUSIC

A.MEM2

SHIFT ATAPE

103 - *3

AUX N.RADIO

PHONO

106 - *3

AUX A.AUX

SHIFT RADIO

100 - *3

*1 Input with control data via cable

*2 RCA in/ out

*3 DIN in/ out

*4 No numeric data via cable. The Direct Mode option is recommended as an alternative.

Input

Socket

Selected

Source

Direct

Option

CableLink

Option

Remarks

BeoSound 9000 AUX A.AUX

SHIFT RADIO

100 - *3

AUX A.MEM

ATAPE

102 - *3

Input

Socket

Selected

Source

Direct

Option

CableLink

Option

Remarks

BeoSound 3000

BeoSound 3200

AUX A.AUX

SHIFT RADIO

100 - *3

AUX A.MEM

ATAPE

102 - *3

AUX N.MUSIC

A.MEM2

SHIFT ATAPE

103 - *3

AUX N.RADIO

PHONO

106 - *3

Input

Socket

Selected

Source

Direct

Option

CableLink

Option

Remarks

BeoSound

Ouverture

AUX N.MUSIC

A.MEM2

SHIFT ATAPE

103 302 *1 *4

AUX N.RADIO

PHONO

106 206 *1 *4

AUX A.AUX

SHIFT RADIO

100 - *1 *4

Input

Socket

Selected

Source

Direct

Option

CableLink

Option

Remarks

BeoSystem 2500 AUX A.AUX

SHIFT RADIO

100 - *1 *4

AUX N.MUSIC

A.MEM2

SHIFT ATAPE

103 302 *1 *4

AUX N.RADIO

PHONO

106 206 *1 *4

*1 Input with control data via cable

*2 RCA in/ out

*3 DIN in/ out

*4 No numeric data via cable. The Direct Mode option is recommended as an alternative.

Input

Socket

Selected

Source

Direct

Option

CableLink

Option

Remarks

BeoCenter 2300 AUX A.AUX

SHIFT RADIO

100 - *1 *4

AUX A.MEM

ATAPE

102 302 *1 *4

AUX N.MUSIC

A.MEM2

SHIFT ATAPE

103 302 *1 *4

AUX N.RADIO

PHONO

106 206 *1 *4

AUX V.TAPE

V.MEM

110 - *5

AUX DTV –SAT 116 - *5

AUX DVD 114 - *5

Input

Socket

Selected

Source

Direct

Option

CableLink

Option

Remarks

BeoMaster 3500

BeoMaster 4500

BeoMaster 6500

BeoMaster 7000

TP1 A.MEM

ATAPE

102 302 *1

CD CD 104 204 *1

TP2 N.MUSIC

A.MEM2

SHIFT ATAPE

103 302 *1

PHONO N.RADIO

PHONO

106 206 *1

AUX A.AUX 100 -

Input

Socket

Selected

Source

Direct

Option

CableLink

Option

Remarks

BeoMaster 3300

BeoMaster 5500

TP A.MEM

A.TAPE

102 302 *1 *4

CD CD 104 204 *1 *4

*1 Input with control data via cable

*2 RCA in/ out

*3 DIN in/ out

*4 No numeric data via cable. The Direct Mode option is recommended as an alternative.

*5 Audiomaster in option2

Input

Socket Direc

Optio

CableLin

k Option

Remarks

BeoCenter 8000

TAPE2 103 302 *1 *4

Input

Socket

Selected

Source

Direc

Optio

CableLin

k Option

Remarks

BeoCenter 8500

BeoCenter 9000

BeoCenter 9500

TAPE2 N.MUSIC

A.MEM2

SHIFT

A.TAPE

103 302 *1 *4

AUX A.AUX 100 -

Input

Socket

Selected

Source

Direc

Optio

CableLin

k Option

Remarks

BeoCenter 9300

PHONO N.RADIO

PHONO

106 206 *1 *4

TAPE2 N.MUSIC

A.MEM2

SHIFT

A.TAPE

103 302 *1 *4

AUX A.AUX 100 -

*1 Input with control data via cable

*2 RCA in/ out

*3 DIN in/ out

*4 No numeric data via cable. The Direct Mode option is recommended as an alternative.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Bosscom Stazione di attracco

Bosscom

Bosscom iPod Dock Manuale utente

Manuali Stazione di attracco popolari di altre marche

Sony

Sony Dream Machine XDR-DS12iP Manuale utente

Acer

Acer USB Type-C Dock II Manuale utente

ATEN

ATEN UC-2000 Manuale utente

Xcellon

Xcellon HDD-202 Manuale utente

Dok

Dok CR09 Manuale utente

Philips

Philips BTM630/12 Manuale utente

IOGear

IOGear Travel Pro GUD3C09 Manuale utente

RKI

RKI SDM-E2 Manuale utente

iHome

iHome iP15 Manuale utente

VITURE ONE

VITURE ONE MOBILE DOCK Manuale utente

Lindy

Lindy 42984 Manuale utente

CipherLab

CipherLab 8001 Manuale utente

Pyle

Pyle PIPDSP2 Manuale utente

Avol

Avol AS2350 Manuale utente

Datalogic

Datalogic JoyaTouch Manuale utente

Philips

Philips DC190/79 Manuale utente

Targus

Targus DOCK315EUZ Manuale utente

Akasa

Akasa DuoDockX3 AK-DK08U3-BK Manuale utente