Bosstab Touch Evo Floor Stand Manuale utente
Getting started guideTouch Evo Floor Stand
DESIGNED FOR DIGITAL USE ONLY
1. Feed cable up through the
hinge pole. Ensure enough length
is fed through to easily plug into
your tablet.
2. Slide the hinge pole onto the
base pole while feeding the cable
through. Screw in grub screws
to secure.
3. Screw on baseplate with .
screws with the charging cable
running underneath.
4. Locate the Touch case and
unscrew the security screw to
remove the top bracket that holds
the adhesive.
5. Attach the Touch case to the
hinge and screw in the
.screws to secure.
6. Peel o the adhesive paper
from the top bracket.
7. Place the bracket in the center
of the tablet and press down and
hold for 20 seconds.
8. Re-attach top bracket and
secure with the security screw.
9. Plug in the charging cable.
Getting started guide
Touch Evo Floor Stand Optional Extras
DESIGNED FOR DIGITAL USE ONLY
Using Allen key provided, tighten screw
at desired angle to lock in position.
Tilt Adjustment Lock
Place case on the pole in a landscape
position and screw . lock screw as
shown to lock in place.
Place case on the pole in a portrait
position and screw . lock screw as
shown to lock in place.
Landscape Rotation Lock Portrait Rotation Lock
Altri manuali Bosstab Rack e supporto
