Boston BTU-1000 Manuale utente

● chromatic tuner

● chord computer

● metronome

● pitch generator

BTU-1000 owners manual

Thank you for purchasing the BTU-1000,

a unique combination of 4 powerful musical tools:

● Chromatic tuner:

The tuner is suitable to tune any instrument due to it’s full ﬂexibility. The

extensive tuning range can detect all notes between A0 (27,5Hz) and

C8 (4186,0Hz). It’s accuracy of +/- 1 cent is far beyond human ear’s

distinction. Pitch of standard note A=440 can be altered from 410Hz to

480Hz and 4 different scales of guitar tuning are available: C, Bb, Eb

and F. Also, ﬂat tuning up to two notes down can be easily set.

● Chord computer:

The chord database can be used in two modes. Mode 1 will accept a

chord name and display the chord’s ﬁnger setting on the guitar neck and

in up to 4 alternate positions. Mode 2 will allow you to mark the ﬁnger

positions on the guitar neck and give you the chord name. 2640 chords

are available!

● Metronome:

The metronome is very ﬂexible and the ‘louder than loud’ volume plus

earphone jack will assure that even a drummer can use this to keep

pace.

● Tone generator:

All tones of the fourth octave can be generated. Standard pitch can

be adjusted from 410Hz to 480Hz. Very convenient for certain wind

instruments!

Please read this manual thoroughly to familiarize yourself wit proper

usage of this BTU-1000

- Do not open the casing for any reason as this may cause short circuit

or malfunction of the product.

- Do not apply excessive force to the product. in the event of the product

suffering breakage, be carefull not to damage yourself with broken

pieces.

- Do not put in any liquid nor foreign object.

- Keep unit away from dust , extreme temperatures and humidity.

- When the unit is not in use for a longer period of time, remove the

battery to prevent leakage.

CAUTION

caution

OPERATION PANEL

LCD DISPLAY

● Mode display area A:

Find chord position mode, Find chord name mode,

Tuner mode, Metronome mode,

Tone generator mode.

● Handset display area B:

Right handed (standard), Left handed.

● Chord Voicing display position C:

Display your selected chord voicing.

● Guitar Fret number display position D:

This tells you to move your hand up to that fret position your ﬁngers.

● Guitar fret board area E:

On the guitar fret board, the six vertical lines represent the six strings

on the guitar, from low E to high E if ‘right hand’ is selected, from high

E to low E if ‘left hand’ is selected (from left to right). ‘X’ stands for

mute, “0” indicates an open string. Black dots indicate the ﬁnger

position. Note name appearing below each string tells you which

note name you played.

OPERATION PROCEDURE

● Press button ➀ to turn on the BTU-1000.

The power will be turned off automatically 5 minutes later if the unit

has been left unattended.

Press this button again to turn off the BTU-1000.

● Mode select:

When you press button ➁ under

any situation when the unit is

on, the mode selecting menu

will appear on the LCD like

the left picture. The flashing outline frame indicates the mode you

select, you can press button ➂ and ➃ to move the flashing cursor.

When you have moved the flashing cursor to the mode you desire,

press button ➄ tot confirm your selected mode, the system will enter

your selected mode.

* If you have not pressed button ➄ to confirm your selected mode, the system will

stay on the mode select menu until auto power off.

FIND CHORD POSITION

1. Under Find chord position mode,

the LCD will display like the left

picture. The position A on the

LCD shows your selected chord

root. When the chord root is

ﬂashing, you can press button

➅ and ➆ to select chord root

from C to B, when your desired

chord root appears, you should

press button ➄ to conﬁrm your

selection or press ➃ button to

move the ﬂash on ➃ button to move the ﬂashing cursor to the next

position.

2. When the LCD position B is ﬂashing, you can press the button ➅ and

➆ to select the chord quality or type. When the chord type you need

appears press button ➄ or ➃ to conﬁrm your selecting or move the

ﬂashing cursor to the next chord type selecting if the next chord type

exist. If the next chord type does not exist, press button ➄ will ﬁnish

chord name setting and chord position will display in the area C.

3. How to select a chord name:

The BTU-1000 does contain 44 chord types for each of the twelve

chord root. You can ﬁnd your desired chord under its symbol. For

example, you want to ﬁnd the chord C7b5#9, you should select

the chord root as C, then select the ﬁrst chord type as 7, select the

second chord type as b5, select the last chord type as #9. The chord

name selecting process does not need you to know the chord’s

construction, you only need to know how to spell the chord symbol.

The following table present the BTU-1000 chord types:

4. Different chord voicing under the same chord name:

One chord can have many different voicing. A voicing refers to how

the chord notes are arranged, which are related to where the chord

is played on the guitar, and how its ﬁngered. BTU-1000 provides 5

different chord voicing for each chord name. When the LCD displays

chord position and there is no ﬂashing cursor, press button ➂ or ➃ to

start chord name setting or chord voicing setting. The chord name

or chord voicing you select will display in the LCD. If the chord name

ﬂash, press button ➄ to enter new chord name setting. Repeat the

previous steps.

FIND CHORD NAME MODE

1. After entering this mode,

the position “1fr” in the left

picture will ﬂash, press

button ➅ and ➆ to select

guitar fret (from 1 to 15).

Press button ➄ to conﬁrm

your selection or press

button ➃ to enter ﬁnger

position setting of each

guitar string. For right

handed chord, the 6 vertical

lines stand for 6E, 5A, 4D,

3G, 2B, 1E, from left to right. For left handed chord, the 6 vertical

lines stand for 6E, 5A, 4D, 3G, 2B, 1 E from right to left.

2. When you set ﬁnger position on the string, the cursor will ﬂash at

the string. Press button ➅ and ➆ to select the ﬁnger position of

that string. “0” stands for open string, “x” stands for not playing this

string (mute), ➂ and ➃ to move to different strings to set. If you have

ﬁnished the last string (1E) setting, press button ➄ to ﬁnish chord

position setting.

BTU-1000 will search the related chord name according to the chord

position you set.

*If you press button ➄ not when you have finished the last string setting the cursor

will move the next string for you to make finger position setting. BTU-1000 will begin

the chord name searching only when you have finished the last string setting and

pressed button  to confirm.

3. Standard guitar chord position transforming.

When you ﬁnished chord

position setting, press button ➄

BTU-1000 will make standard

transforming for your setting.

The standard transforming has

the following 2 rules:

⑴ if the fret number can go

back to 1 fret, BTU-1000 will

transform it to 1 fret, such as

the left picture A-A.

The left picture is the position

picture you set.

The right picture is the chord

position picture after standard

transforming.

They stand for the same chord position.

⑵ If the fret number is not 1 fret and can not go back to 1 fret, BTU-

1000 will make the ﬁrst doted fret the ﬁrst line. In the above picture

B-B, the left one is the chord position picture you set. The right one

is the position picture after standard transforming. They stand for

the same guitar chord position. BTU-1000 will display the position

picture on the LCD after standard transforming.

4. Guitar chord name searching result display:

BTU-1000 will search in its memory the chord name in accordance

with the chord position you set. If it can not ﬁnd the related chord

name, the LCD will display the information as the above picture

A. and the word “SORRY!” will ﬂash standing for not ﬁnding this

chord. Press button ➂ or ➃ tot reset the chord position. Repeat the

previous steps. If the BTU-1000 ﬁnd the related chord name, the

LCD will display the information as the above picture B. Chord name

will display at position C. Chord position will display at position D.

If the searching result includes more than one chord name, press

button ➂, the ﬂashing cursor will move to position C. The chord

name will ﬂash. You can press button ➅ and ➆ to check other chord

names. The ﬂashing cursor will move among position C, D and E.

When the ﬂashing cursor is at position D, pressing button ➄ will stop

the ﬂashing position D and position F will start ﬂashing. At this time

press button ➅ and ➆, you can check other chord voices under this

chord name. Press button ➄ to conﬁrm. When the ﬂashing cursor is

at the area E (the whole chord position picture), press button ➄ you

will begin new chord position setting. Repeat the previous steps to

have a new search. If the searching result has only one chord name,

the cursor will not move to position C in the LCD.

5. Right and left handed chord setting.

No matter it’s under chord1 or chord2

mode, press button ➁ for about 2

seconds, you will see right and left

displaying on the LCD as the left picture.

The cursor will ﬂash at the position you

have chosen. Press button ➅ and ➆ to

select the mode you need. Then press

button ➄ to conﬁrm and leave right and left handed chord setting.

TUNER MODE

1. After entering this mode, BTU-1000 can start tuning automatically if

there is any sound input. Choose tuning with mic or input jack: When

tuning with mic, don’t plug any

object in the input jack. Otherwise

the mic will not work. And please

try to make the sounding part of

the music instrument closer to the

mic of BTU-1000 to get best tuning

result.

When tuning with input jack, please

plug the output plug of pick up in the

input jack of BTU-1000.

2. Key selecting:

Press button ➂ and ➃ to move the ﬂashing cursor to the position

KEY in above picture. Then press button ➅ and ➆ to select the key

you need. You can choose among C, Bb and F. The key you selected

will display at the position KEY.

3. A4 calibration

Press button ➂ and ➃ to move the ﬂashing cursor to the position

A4 in above picture. Then press button ➅ and ➆ to select the A4

frequency you need. The A4 frequency will increase or decrease

every time with 1 Hz step. A4 range is from 410 Hz ~ 480 Hz.

Keeping pressing this button will automatically increase or decrease

A4 frequency continuously. A4 frequency will display at position A4

in the above LCD picture.

4. Flat tuning setting:

Press button ➂ and ➃ to mover flashing cursor to position FLAT

in the above picture. Then press button ➅ and ➆ to select the flat

setting you need. You can set standard mode tuning or flat tuning.

Flat tuning can be set as b, bb, bbb and bbbb. Flat setting will display

at FLAT position in above LCD picture.

* Its standard tuning if there is no “b” at the position FLAT in the LCD.

5. How to tune:

When tuning, the musical instrument gives a sound. The note name

of that sound will display at position A in the LCD. Adjust the sound

of the musical instrument to get the desired note name in the LCD.

At the same time, the needle in the LCD will move according to the

sound. When the sound is lower or higher, the LED indicating light

will light red. When the sound is in tune, the LED indicating light

will light green. And at this time the LCD needle will be at the center

position.

1. After entering this mode,

the LCD display will be as

the left picture.

2. Beat setting:

Press button ➂ and ➃ to

move cursor to position

BEAT as in the left picture.

Than press button ➅ an ➆

to adjust beat.

Beat adjusting range is

from 0 to 9. After ﬁnishing

beat setting, you can move

the cursor to the position

you need by pressing

button ➅ and ➆ to set other

parameter. If you have ﬁnished setting, press button ➄ to conﬁrm.

3. Tempo setting:

Press button ➂ and ➃ to move the cursor to the position TMP as in

the above picture. Than press button ➅ and ➆ to adjust the tempo.

Tempo range is from 30 to 250 BPM. If keeping pressing button ➅ or

➆, you can increase or decrease tempo continuously with 1 Hz step.

After ﬁnishing tempo setting, you can move the cursor to the position

you need by pressing button ➄ to conﬁrm.

4. Rhythm setting:

Press button ➂ and ➃ to mover the cursor to the position RHYTHM

as in the above picture. Then press button ➅ and ➆ to adjust the

rhythm. After ﬁnishing rhythm setting, you can move the cursor to the

position you need by pressing button ➂ or ➃ to set other parameter.

If you have ﬁnished setting, press button ➄ to conﬁrm.

*You need to press button ➄ to confirm your setting every time when you finish

setting. Otherwise the cursor will stay flashing.

METRONOME MODE

Indice

Altri manuali Boston Sintonizzatore

Boston

Boston BTU-200 Manuale utente

Manuali Sintonizzatore popolari di altre marche

Tunersys

Tunersys WS16 1 Manuale utente

Arcam

Arcam DT91 Manuale utente

Magnum

Magnum MD 102T Manuale utente

HDHomeRun

HDHomeRun 20121008 Manuale utente

Crestron

Crestron C2N-TXM Manuale utente

Eico

Eico HFT-92 Manuale utente

MFJ

MFJ MFJ-928 Manuale utente

NAD

NAD C 445 Manuale utente

Sony

Sony ST-SA5ES Manuale utente

Sirius Satellite Radio

Sirius Satellite Radio SC-FM1 Manuale utente

Antique Automobile Radio

Antique Automobile Radio 283501B Manuale utente

Monacor

Monacor PA-1200R Manuale utente

Technics

Technics ST-X301L Manuale utente

Manhattan

Manhattan 176156 Manuale utente

Marantz

Marantz ST-15S1 Manuale utente

Korg

Korg HA-40 Manuale utente

Harman Kardon

Harman Kardon TU915 Manuale utente

Teac

Teac T-1D Manuale utente