Bounce fit Vector 2 Manuale utente
1. Android 4.4 and above 2.ios 8.5 and above Bluetooth 4.0
Please charge the smart band for 2 - 2.5 hours before turning on the
smart band first me. Baery sign will be shown on the screen while
charging.
I.Compable OS and requirements
I
Funcons
Connecon Instrucons
III
IV
Mobile APP download Method
Method 1: Scan the OR code above to download or
Method 2: Search" T band " In Android store or APP store to
download and Install.
OLEO display screen
Touch Buon
Sensor Light
Charging Point
please charge
the smart
band once
every three
months if
the smart
band is idle.
Preparaon
II
Time mode: Displaying remaining baery, date and me, sleep
me, steps(Date and me could not be set on the smart band.
Date and me will be synchronized aer connecng to the
device), press and hold to change the interface.
Acvies informaon Interface: record the steps, distance
and calories burnt within one day.
IOS Android
Heart rate measurement: measure heart rate hourly, or
measure heart rate manually. Press and hold to enter into heart
rate measurement interface.
Blood pressure measurement: measure blood, pressure hourly,
or measure blood pressure manually. Press and hold to enter
into blood pressure measurement interface.
Blood oxygen measurement: measure blood oxygen hourly, or
measure blood oxygen manually. Press and hold to enter into
blood oxygen measurement interface. Sleep monitoring:
automac detecon of daily sleep quality.
Sleep quality informaon interface: measure sleep quality
automacally daily.
Training mode: press and hold the training mode interface to
enter. Running, Alpinism, and cycling modes are built in. Press
and hold to start record exercise me, calories burnt. Press to
pause. Press and hold to exit current mode.
More: Find my phone (Press and hold to find Press to Stop) Music
control (Press and hold to enter or exit, press respecve buon
to play, previous song, next song, Message reminder turn on the
noficaon on APP. Noficaon will be shown on the smart
band once there is APP noficaon, incoming calls text messages
received, nave informaon (check the model number, MAC
address, firware verision, etc.) turn off (press and hold to turn
off) return (press and hold to return to upper menu)
Others: hand up to wake up screen sedentary reminder, do not
disturb to take photo, hourly measurement, we chat sport, Apple
health, match language automacally.
o2
Can't find the smart or can't establish connecon
Android system:
1. Please make sure the Bluetooth is turned on, and the Bluetooth sign
is not on the smart band (The smart band are connected if there is
Bluetooth sign.) Put the smart band and the device side by side, try to
search and connect. The connecon can be established on Android 4.4
and above.
2. Sll unable to connect, enter Sengs - Applicaon management-
authorizaon management - applicaon access authorizaon, find T
band, allow all the access, enter into Seng again to run on GPS
locaon service, restart the phone, try to connect again.
IOS system:
Please make sure the Bluetooth is turned on, and the Bluetooth sign is
not on the smart band ( the smart band are connected if there is
Bluetooth sign. Please forget the device first). Go to sengs -
Bluetooth - forgot this device, aer that the APP will he able to detect
smart band.
Aer binding the smart band, it shows not connected or remaining
baery is 0%?
The smart band and the device is not connected successfully, please
bind the devices again.
No data shown on APP?
Pull down to refresh the main page,the data will be synchronized and
shown on the APP. Automac data synchronizaon will only be done
on the first-me connecon establishment. Aerward, data will be
synchronized automacally hourly. Besides, turn on the hourly
measurement. The APP read the hourly data(steps, heart rate) from
the smart band. There will be no data if the hourly measurement is off.
Aer refreshing, no data shown.
Go to app sengs-reset factory seng-press-smart band turn off -
turn on the smart band and connect to the APP again. The data will be
able to load on the APP.
FAQ
V
Screen
Blue tooth
Waterproof level
Baery Type
Baery capacity
Charging
Diameter
Wrist band size
Charging method
Packing
1.3 inches
Bluetooth 4.0
IP67
Polymer Baery
170mAh
2-2.5 hours
42.5mm
255mm*20mm*2.3mm
Clip charging
Smart band+Charging clip+User Manual
1. If there is any problem with the quality of the product or the use of
the product, please contact the store directly, we will deal with it
quickly.
2. The measurement results of this product are for reference only and
are not intended for any medical use or basis. Please follow the
doctor's Instrucons and must not self -diagnose and treat according
to the measurement results.
3. The product waterproof rang is iP67. can be used for water
proofing, not for diving and for a long me in the water. In addion,
this product does not prevent hot water because water vapor will
affect the ring.
4. The company reserves the right to modify the contents of this
manual without prior noce. Some funcons are different In the
corresponding soware version, which is normal.
5. This product contains a polymer baery. Do not place this product in
a high temperature environment for a long me. Do not place this
product in an open flame.
Time Is not synchronized,
Go to Samna-Applicaon management-torn on APP access-connect
the smart band and the APP again-Pull down to refresh Me APP.
Specificaons
VI
Remarks
VII
THANK YOU
For Buying
Indice
Altri manuali Bounce fit Orologio
