bouncepad Wing Manuale utente
Sheet Code: BP-IM-072_REV0
Release Date: 24/05/2021
Copyright 2016 Spotspot Ltd. (T/A
Bouncepad) all rights reserved.
Condential, no part of this publication
may be reproduced or transmitted in any
form without the written permission of the
copyright holder.
Wing - Freestanding
Assembly Instructions
In the Box Fixings
List
Tools Required:
All tools provided
Mounting Arm
Access Panel
Freestanding
Base
Mounting Arm
Case Back Faceplate
2x M4x10mm
Buttonhead
screw
10x M6x10mm
Buttonhead
screw
*xings to attach the stand to the
ground are not provided.
Locate the Mounting Arm onto the
Freestanding Base.
Secure the Mounting Arm to the
Mount Bracket, with 5x M6x10mm
screws.
1 2 3 Remove the Mounting Arm Access
Panel. Safely store this aside for use
later.
4Unlock and remove the Faceplate
from the Case Back. Store this aside. 5Locate and secure the Case Back to
the Mounting Arm, with 4x M6x10mm
screws. Ensure good Case alignment. 6Install the tablet and the tablet
power cable.
*The Case is congured to your order.
If requiring a dierent tablet
conguration, please contact us.
7 9
10
Locate and lock the Faceplate onto the Case
Back. For additional security, install 2x M4x10mm
screws to retain the Faceplate.
Locate and secure the
Access Panel to the
Mounting Arm.
For additional security, the stand has
multiple Kensington Security Slots.
Where required, install the cable.
8Connect the tablet cable to a power
source.
Installation is now complete.
11
Altri manuali bouncepad Rack e supporto
bouncepad
bouncepad Wing Manuale utente
bouncepad
bouncepad CADDY Manuale utente
bouncepad
bouncepad Wallmount Manuale utente
bouncepad
bouncepad Lounge Manuale utente
bouncepad
bouncepad Floorstanding Manuale utente
bouncepad
bouncepad VESA Manuale utente
bouncepad
bouncepad Wing-Slim Manuale utente
bouncepad
bouncepad Wing Freestanding Manuale utente
bouncepad
bouncepad Self-Service Mount Manuale utente
bouncepad
bouncepad Sumo 270 Degrees Mounting Arm Manuale utente
