Box-Design DS2T Manuale utente

INSTRUCTIONS FOR USE

Pro-Ject CD Box DS2T

Dear music lover,

thank you for purchasing a Pro-Ject Audio Systems CD player.

In order to achieve maximum performance and reliability you should study these instructions for use carefully.

Warning of a hazard for the user, the unit or possible misuse.

Important notice.

Caution! Laser diode, discs to avoid, safety instructions

This product contains a laser diode. To ensure continued safety, do not remove any covers or attempt to

gain access to the inside of the product. Refer all servicing to qualified personnel.

If a disc is cracked, chipped, warped, or otherwise damaged, don't risk to play it. You co

uld end up

damaging the unit. This player is designed for use with fully circular, full size CDs only. Use of shaped

discs is not recommended. The manufacturer and the distributor disclaims all liability arising in

connection with the use of damaged or shaped discs.

AC outlet voltages vary from country to country. Before connecting to the mains, make sure that the

voltage in your area meets the voltage requirements printed on the power supply.

The power supply is used to disconnect the unit from the mains. Make sure that the power supply is easily

accessible at all times. Never handle the device, the power supply while your hands are wet or damp.

Avoid letting liquids enter the device or the power supply. Never place any item containing liquid,

such as a flower vase on or near the device. Never spill any liquid on the device or the power supply.

Never place any naked flame sources, such as lighted candles on or near the device. The product shall not

be used in damp or wet locations, next to a bathtub, sink, swimming pool or any other similar conditions.

Connectors

Make all connections whilst the CD player is disconnected from the power supply.

Never use any other power supply than the one supplied with the unit.

Connection to an external D/A-converter

Use one of the available S/PDIF sockets (Coaxial, Optical) or AES/EBU to connect the CD player to a D/A

converter or AV processor.

Mains power connection and methods to switch the unit on and off

Connect the low voltage plug from the power supply to the

Power 9V

socket of the unit

before

connecting

the power supply to the mains. The unit can be switched on and off by using 2 different methods which are

equal in priorities.

1. Using front pushbutton to switch on or into standby

The pushbutton on the front panel of the unit alternately turns the power on or returns it to standby mode. The

blue LED on the front panel shows that the unit is powered on. If a trigger signal is present the unit can’t be

switched off by the pushbutton.

2. Remote power on - triggers

The unit can be switched on via other Box Design components when a 12V trigger voltage is present at the

2.5mm socket marked

Trigger Input.

Special power-on cables (polarity ) in diverse lengths are

available as accessories. The remote power-on signal can be relayed to further units via the

Trigger Output

socket. When the 12V trigger signal is switched off, the unit will also switch off.

Trigger cables may only be plugged into the sockets when the unit is disconnected from t

he power

supply and from the mains. Failure to do so may result in damage of the unit.

Remote control

turns the unit on or back into standby

Volume control

or adjust the sound volume of your Pro-Ject Audio amplifier

(Excluding Pre box RS Digital, Maia DS(2), Pre Box DS2 Digital, Pre Box DS2

Analogue)

Stop

stops playback

Start / Pause

starts and pauses playback alternately

Selecting tracks

- and accesses a specific track directly and start playback.

For example, to play track 19, press and .

To play track 29, press , and .

ON/OFF

VOL

STOP

1 9 +10

+10 9

+10 2 9

Stepping between tracks, scanning through the disc

Press or . The display shows the number of the tracks as you step.

Pressing while playback, starts playback of the current track from the beginning.

Press and hold the button for fast reverse scanning. activates fast forward scanning.

Repeat and random play

Pressing the button repeatedly selects the repeat modes and random play. The display shows:

repeat play for the current track

repeat play for all tracks

shuffle play

Pressing again takes the CD player back to standard playback.

Front panel controls

Inserting and ejecting a disc

Switch the unit on from standby. Insert the disc into the slot, with the label side facing upwards. The slot-loading

mechanism will load the disc automatically. The display shows the total number of tracks on the disc and the

total duration of the disc.

A short press of the button stops playback. Pressing again, ejects the disc.

Dimming the display

Press and hold the buttons and will change the display brightness - full, half and one third.

To access that function, playback must be stopped.

Play

starts playback of the first track. The display shows the current track number, the elapsed time of the

current track and the play icon.

Pause

pauses playback. The display shows the current track number, the elapsed time of the current track and

the pause icon.

To resume playback press again.

Stop

A short press of the button stops playback. The display shows the total number of tracks on the disc, the

total duration of the disc and the stop icon.

Stepping between tracks

Press the buttons (previous track) or (next track).

Pressing while playback, the current track starts playing from the beginning.

The display shows the number of the tracks as you step, the elapsed time of the current track and the step icon.

Scanning through the disc

Press and hold the button (fast backward) or (fast forward) to scan through the disc. The display

shows the current track number, the elapsed time of the current track and the scan icon.

Releasing or will take you back to playback.

Replacing batteries

Proceed as follows:

•Unlock and slide open the battery case cover

•Replace the battery.

Make sure the battery is the right way round !

•Close the battery case cover

Battery type: 1 x CR2032 / 3V or 1 x CR2025 / 3V

Do not dispose the batteries as ordinary domestic refuse. Please dispose your exhausted batteries at

the appropriate collection sites - usually located at supermarkets and drugstores.

Technical specifications Pro-Ject CD Box DS2T

Supports: CD, CD-R, CD-RW and Hybrid-SACD

Digital output: 1 x optical (TOSlink®, S/PDIF)

1 x co-axial (S/PDIF)

1 x AES/EBU

Trigger input: 12V on/off detector

Trigger output: 12V

Outboard power supply: 9V/2.000mA DC; suitable for your country's mains supply

Power consumption: 300 - 1.500mA DC, <1W in standby

Replacement battery remote control: 1 x CR2032 / 3V or 1 x CR2025 / 3V

Dimensions W x H x D (D with sockets): Aluminium version: 206 x 71 x 199 mm

Wood version: 240 x 72 x 199 mm

Weight: Aluminium version: 1620 g without power supply

Wood version: 2070 g without power supply

Service

Should you encounter a problem which you are not able to alleviate or identify, please contact your dealer for

further advice. Only if the problem cannot be resolved there, the unit should be sent to the responsible

distributor in your country.

Warranty

The manufacturer accepts no responsibility for damage caused by not adhering to these instructions

for use. Modification or changes to any part of the product by unauthorized persons release the

manufacturer from any liability over and above the lawful rights of the customer.

Pro-Ject Audio Systems is a registered Trademark of

H. Lichtenegger.

This guide was produced by: Pro-Ject Audio Systems

The information was correct at the time of

going to

press. The manufacturer reserves the right to make

changes to the technical specification without prior

notice as deemed necessary to uphold the ongoing

process of technical development.

TOSlink®is a registered trademark of Toshiba corporation. Dolby®is a registered trademarks of Dolby

Laboratories. DTS™is a registered trademark of DTS, Inc.

Indice

Altri manuali Box-Design Impianto stereo

Box-Design

Box-Design Pro-Ject USB Box S+ Manuale utente

Manuali Impianto stereo popolari di altre marche

LG CM3330B Manuale utente

Sony

Sony SS-CEP50 Manuale utente

Cetacea Sound

Cetacea Sound CVS-II Manuale utente

Aiwa

Aiwa XR-H66MD Manuale utente

Denon

Denon UCD-250 Manuale utente

Sanyo

Sanyo DC-MX41i Manuale utente

Sharp

Sharp CD-ES600V Manuale utente

Exibel

Exibel BDX600-UK Manuale utente

Sanyo

Sanyo DC-F320 Manuale utente

Philips

Philips FWM583X Manuale utente

Sharp

Sharp CD-C462 Manuale utente

Onkyo

Onkyo CBX 300 - CD / MP3 Clock Radio Manuale utente

Aiwa

Aiwa XR-EM70 Manuale utente

Cyrus

Cyrus Lyric Manuale utente

Philips

Philips MCM159/98 Manuale utente

Philips/Magnavox

Philips/Magnavox Magnavox FW 62C Manuale utente

RCA

RCA RS3965SB Manuale utente

Sharp

Sharp XL-UH240 Manuale utente