BrandMotionotion ADAS+ Istruzioni per il montaggio
Features
Main Features of OPTIAN!!
FCW ( Forward Collision Warning )
LDW (Lane Departure Warning )
FCDA ( Front Car Departure Alert )
DVR ( Driving Recorder )
Full HD Clear Display
Touch LCD Monitor
Event/ Motion Detection CCTV Recording in Parking Mode
Battery Discharge Prevention
GPS Track Recording
3
Contents
Safety
Caution Warning & Caution
Accessories
Check Accessories
Main Body & Functions
Rear Camera & Functions
Installation Precautions
Installation Method
Main
Functions
Forward Collision Warning
Lane Departure Warning
Front Car Departure Alert
DVR
Manual Guide Video Playback
Configuration
Data Manager
Program Installation Method
Screen Composition
Button Explanation
Maintenance SD Card Format
Troubleshooting
Appendix Specification
Settings Angle Adjustment
Vehicle Type Setting
Start Booting up
Screen Types & Explanation
Manual
Guide
Basic Menu
ADAS CAM
DVR
4
Accessories
Rear camera
Connection Cable
Main Body
Cigar Jack or
Power Supply Cable
Rear Camera Micro SD Card
(
Consumable
) SD Card Adapter
•Specifications of the above accessories are subject to change according to
the components supply.
•Above images are just to help user‟s understanding and actual components
may look a little different .
•PLK Tech is not responsible for any issues/damages that may occur from not
using authorized parts and accessories (including the Micro SD card ) .
Front
Camera
(Full HD)
Internal GPS
Detachable
Bracket
Main Body
Security
LED
Volume
Adjustment
Button
Menu
Button Touch
LCD
Manual
Recording
Button (REC) Camera
Angle
Adjuster
MIC
DC power port
(3.5 pi)
Micro
SD Card
Socket
Rear Camera Connection
Continuous
Power Supply
Connection
8
Rear Camera / Internal Camera
Rear Camera
(VGA)
Integral bracket
Indication
LED DC Power-supply Port
•When attaching the rear camera to
the rear window glass , please make
sure the bracket is on the right side.
•the rear camera angle can be
adjusted by rotating the main body
9
FCW (Forward Collision Warning)
1. FCW function generates a warning signal when there is a potential risk of collision to the vehicle
ahead .
2. The collision risk is evaluated through TTC ( Time To Collision ) and it is classified by 3 phases.
•TTC : The calculated value of the distance and the relative speed between a front vehicle and the
host vehicle
•Sensitive : TTC 0.9sec / Normal : TTC 0.7sec / Insensitive : TTC 0.5 sec
•Secondary Warning : TTC 0.4 sec
•The TTC sensitivity can be adjusted from the menu.
3. FCW function works when the vehicle is moving at the speed rate which is above the set speed
value.
•Default Speed Setting: 30km/h
•ADAS operating speed value can be adjusted from 20 to 80(km/h) in the menu.
4. FCW can help avoid accidents caused by careless driving behaviors such as adjusting air conditioning
or other distractions.
Main Functions
ADAS functions are designed to assist the driver, however, it is not a substitute for careful driving and we take no responsibility for
any damage caused by careless driving . Drivers should comply with local traffic regulations and should not rely on the ADAS CAM
completely but use the system to assist only. 10
1. LDW function generates an audible signal if the vehicle departs from the lane while
driving above the set speed in the menu.
2. LDW function works when the vehicle speed rate from internal GPS signal is over the
set speed value.
•Default Speed Setting : 60km/h
•LDW activating speed can be adjusted from 40 to 80(km/h) in the menu.
•Sensitivity of LDW can be changed in the 「Smart Car」 menu.
3. LDW function activates when the vehicle moves for more than 2 seconds in the lane .
4. LDW will help avoid any lane departure accidents caused by drowsiness or carelessness
on the road.
LDW (Lane Departure Warning)
ADAS functions are designed to assist the driver, however, it is not a substitute for careful driving and we take no responsibility for
any damage caused by careless driving . Drivers should comply with local traffic regulations and should not rely on the ADAS CAM
completely but use the system to assist only. 11
FCDA or Beep & Watch ( Front Car Departure Alert )
1. FCDA function is activated only when the vehicle is stationary on the road.
2. FCDA can detect the movement of a vehicle in front while waiting for the traffic light to
change and will inform the driver of any front movement through a warning tone.
3. FCDA generates a warning tone when the host vehicle starts to move closer to the front
vehicle while waiting in a traffic jam.
4. The function only activates when the speed rate from internal GPS becomes 0 .
5. FCDA is a helpful function especially while waiting at traffic lights or in traffic congestion.
ADAS functions are designed to assist the driver, however, it is not a substitute for careful driving and we take no responsibility for
any damage caused by careless driving . Drivers should comply with local traffic regulations and should not rely on the ADAS CAM
completely but use the system to assist only. 12
DVR ( Driving Video Recorder )
1. DVR function can record data with the Full-HD front camera and the VGA rear ( if equipped )
camera.
2. Types of Recording
•Continuous Recording: Records video in 30 second segments and saves as files in the micro
SD card under the Continuous File folder.
•Event Recording: Records data automatically into the Event File folder when a detected impact
value is over the set detection value; When the impact is detected , it will immediately store the
previous 15 seconds prior to impact and start recording video for next 15 seconds.
< Driving over speed bump, manhole or uneven road at high speed may also be recorded as Event files >
•Manual Recording: Records the event data when pressing the external REC button . it will
record for 30 seconds ( 15 seconds before and 15 seconds after ) as of the time when the
button is pressed.
•CCTV ( Parking Event Recording Guide ): Will inform the driver the number of recorded
parking events through a voice message when the ignition is turned on.
13
Indice
