Brave Steel-C Guida alla risoluzione dei problemi

Brave Steel - C

Brave Steel - LC

User and Service Manual

Version 2.6

Brave –Door Entry System

Welcome

Congratulation on purchasing the „BRAVE Steel Door Entry system‟, which is a

continuation of the successful „New Universal Door Entry System‟

NUDV.

The Brave Steel Door Entry System is a universal project with the title “BRAVE”

with different designs bringing a wider spectrum of functions and

possibilities.

This manual is for the following „Urmet 1158 Synthesis Steel‟ options:

Brave Steel - C - full variant

Brave Steel - LC - reduced variant (low cost)

Basic functions of the new line

Urmet Sinthesi Steel is a modular variation of the new design and has a

lot in common with NUDV 1145 (it is possible to use the same mounting

box);

LED backlit name tags;

Two independent relays with 8 setting regimes (C);

Potential to power an electrical lock on a Door System with a problematic

switchboard (replaces the Best Box) and relays regime with constant

condition (C);

Electronic volume control without the need to open the front cover;

Programmable tone detection for call disconnection or repeat calls;

Integrated RTC clock (i.e. automatic day/night switching) (C);

Programming with a DTMF phone or USB cable from a PC; and

24 digit telephone numbers including * # Flash and Pause

Manual Version V2.6 22.10.2013

Alphatech spol. s r.o.

Jeremenkova 88

140 00 Praha 4

Tel/fax: 272103334

www.alphatech.cz / inf[email protected]z

Table of Contents

1BASIC FEATURES............................................................................................. 6

1.1 FEATURES ............................................................................................6

1.2 TERMINOLOGY ......................................................................................7

1.3 BRAVE STEEL VERSIONS AND DIFFERENCES............................................8

1.4 UNIT FEATURES.....................................................................................8

1.4.1 Modules..................................................................................................... 8

1.4.2 Mechanical parts ...................................................................................... 9

1.4.3 Module compositions.............................................................................. 11

1.5 MOTHERBOARD CONNECTION ..............................................................12

1.5 CONNECTION OF MODULES BSC(M)-MOD4...........................................15

1.6 BSKEY KEYBOARD CONNECTION..........................................................17

2INSTALLATION............................................................................................... 18

2.1 ASSEMBLY..........................................................................................18

2.1.1 Front cover disassembly ......................................................................... 18

2.1.2 Name tag back lighting assembly and disassembly ................................ 19

2.1.3 Inserting the module into the mounting frame ........................................ 20

2.1.4 Mounting frame assembly....................................................................... 20

2.1.5 Cover frame assembly............................................................................. 21

2.1.6 Wall mounting......................................................................................... 21

2.2 CONNECTION ......................................................................................22

2.2.1 Code relay (COSW) ................................................................................ 25

2.3 OTHER ACCESSORIES..........................................................................26

2.3.1 Time Relay .............................................................................................. 26

2.3.2 Power supply 12V................................................................................... 26

2.3.3 USB Programming cable........................................................................ 26

3DOOR ENTRY SYSTEM OPERATION ........................................................ 27

3.1 SIGNALLING OVERVIEW........................................................................27

3.2 CALLER AT THE DOOR..........................................................................28

3.2.1 Relays regimes........................................................................................ 29

3.3 PERSON IN THE BUILDING.....................................................................30

3.3.1 Outbound call ......................................................................................... 30

3.3.2 Incoming call .......................................................................................... 31

3.3.3 Door Entry System with keyboard –module BSKey ............................... 31

3.4 ACOUSTIC PATH SETTING.....................................................................32

4PARAMETER PROGRAMMING................................................................... 33

4.1 PROGRAMMING WITH THE HELP OF A PHONE .........................................33

4.1.1 Entry into the programming.................................................................... 33

4.1.2 Parameter programming ........................................................................ 33

4.2 PROGRAMMING WITH THE HELP OF A PC –PROGRAMME BRAVESET ......34

BRAVE Steel –User and service manual 5

5DESCRIPTION OF PROGRAMMABLE PARAMETERS.......................... 35

5.1 DIRECT DIALLING -MEMORY.................................................................35

5.2 RELAYS ..............................................................................................36

5.3 BASIC PARAMETERS ............................................................................42

5.4 TIME PARAMETERS..............................................................................45

5.5 SYSTEM PARAMETERS.........................................................................49

5.6 PARAMETER SETTING HANDS FREE......................................................52

5.7 TIME PROGRAMME –AUTOMATIC SWITCH DAY/NIGHT (C).......................55

5.8 BASIC SETTING AND DELETION .............................................................57

5.9 END OF PROGRAMMING .......................................................................57

5.10 PARAMETER OVERVIEW .......................................................................58

6TECHNICAL PARAMETERS......................................................................... 62

6.1 ELECTRICAL PARAMETERS...................................................................62

6.2 MECHANICAL DIMENSIONS ...................................................................62

7TABLE FOR EASY PROGRAMMING.......................................................... 63

6BRAVE Steel –User and service manual

1 Basic features

1.1 Features

Voice communication is powered from a telephone line;

Impulse and tone (DTMF) options;

Storage of 2 24-digit long numbers per button (including*, #, Flash and

pause);

Automatic Day/Night switch, programmed weekly by a DTMF code on

the internal RTC clock (C);

Option to prolong a call with * or #;

Option to connect two independent electronic locks, to open doors (C);

Potential to use up to 8 relay regimes (for an additional bell, gradual

door opening etc.);

Two codes to disconnect the Door Entry System from a phone;

Two codes to open doors from the phone for 1-impulse and two codes

for 2-impulse;

3 x 6 code locks for each relay (password from door buttons);

Can be connected electrically secure lock on the first switch (serial

activation code)

Option to connect an exit button (C);

Option to disconnect a call by the repeated pressing of a button;

Option to switch on a „baby call‟ regime (no number dialling);

Option to switch on a regime to suppress the DTMF connection from

the microphone;

Option to switch on a „ticking‟ sound into a call to announce another

call;

Option to switch on acoustic signalling for relay connection;

Option to set the number of rings before connecting a call;

Programmable parameters for tone options Flash length and Pause

length;

Programmable parameters for acoustic signalisation;

Programmable parameters for tone detection;

Electronic volume setting without the need to open the front cover;

Option to power from an internal 12V supply (replaces Best Box) (C)

Easy setting HW with the help of a DIP switch;

Several firmware options;

Programmable with PC, via USB cable, and remote DTMF

programming;

Integrated regulated heating of the PCB;

Switchable name tag lighting;

Unit earthed for better protection against static electricity

BRAVE Steel –User and service manual 7

1.2 Terminology

Telephone line Analogue (2 conductors) connecting to a public telephone

network (public line) or to a local telephone system (local

line).

Line connection The start of a telephone connection (the same as picking up a

phone handset).

Line disconnection End of connection (the same as replacing a phone handset).

Option DTMF - a tone option combination of two tones (chooses also

special signs * and #, uses breaking the loop Flash)

Impulsive –option by breaking the loop (chooses only digits)

Incoming call Connection between a Brave and a phone made by selecting

an option on the phone. The Brave connects the call after set

number of rings. The Brave can be programmed from the

phone following a connection by inputting a password.

Outbound call Connection between the Brave and a phone made by choosing

an option on the Brave (i.e. Pressing a button).

Call connection Signalised when following the dialled number is picked up.

This signal is not available on an analogue line, but the ringing

tone ends and a connection begins. It is difficult to identify the

exact moment this occurs.

Code lock Function for relay connections by inputting a combination of up

to 10 buttons or keyboard keys (after pressing the key symbol)

Code relay between Doorphone Brave and the electric lock can be

connected code relay (COSW - CodeSwitch), which is located

at the lock and lock activates only when is the same the

specified serial combination of the Brave and set the code on

the board relay (COSW).

External code Combination of 10 buttons or keyboard keys (after pressing the

key symbol) for a relay connection. External = being input on

the Brave outside the building

Internal code Digits combination dial from phone for relay activation (DTMF).

Internal = dial by phone –inside building ( phone connected to

other PBX extension)

The manufacturer continuously improves the product firmware. The

technology used allows you to upload to Brave the latest version of the

firmware any time using a standard computer with BraveSet and USB

cable. The latest version of the firmware is available at

http://www.alphatech.cz

8BRAVE Steel –User and service manual

1.3 Brave Steel versions and differences

The Brave door entry system is conceived as system that provides a

final solution based on a modular design. The features and parameters that

are available to, and can be set, differ for each version of the Brave. It is

therefore necessary to set the parameters for all versions including any add-on

parameters for each version.

In this manual the features marked with (C) are for the Brave Steel -

Comfort version and the features without markings are for the Low Cost (LC)

basic version:

Available Features:

Version LC (low cost - reduced) includes all features that are not marked (C)

Version C(Comfort full) has marking (C)

1.4 Unit features

The basic „STEEL' versions of the door entry system, Brave LC and C,

contain a motherboard fitted with requisite connection and structural

components according to the module version. The basic module is equipped

with one, two or no buttons.

It is possible to extend the basic module with anything from four to 99

buttons.

1.4.1 Modules

Basic module Basic module Basic module

BS-02C / BS-02LC BS-01C / BS-01LC BS-00C / BS-00LC

c:1158/22 1158/32 c:1158/21 1158/31 c:1158/20 1158/30

Button module Button module Button module

BSC-mod4 BSM-mod4 BSKey

code: 1158/15 code: 1158/14 code: 1158/46

BRAVE Steel –User and service manual 9

Add on module Add on module Add on module

Blanking plug c:1158/59 tag card c:1158/50 RFID c:1158/45

LC and Cmodel motherboards differ in that the (LC) version omits:

A second relay;

A RTC internal clock, automatically switching between day/night;

The potential for an external power supply;

Variable name tag back lighting; and

An exit button.

1.4.2 Mechanical parts

The illustrations below show the mechanical part options required for a 2

module system. For other amounts the end number is 1 –4, for two modules

the number is 2. There is maximum of 4 modules in one column, large

compositions contains maximum of 3 columns (12 modules). For even larger

compositions it is possible to put blocks of 12 modules next to or above each

other.

Assembly box Assembly box Mounting frame and cover frame

for below plaster for below plaster for assembly above and below

1158/42 1145/52 1158/62

For illustration Only

it is also possible to use the MK2 from NUDV

10 BRAVE Steel –User and service manual

Roof Frame Housing for assembly on plaster

for below plaster for below plaster 1158/SH2

1158/612 1158/802

Rain cover - compact

for assembly on plaster

1158/312 (contains 1158/62)

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Brave Sistema di interfono

Brave

Brave Smyle - C Manuale utente

Manuali Sistema di interfono popolari di altre marche

Bticino

Bticino LINEA 3000 Manuale utente

MSI

MSI MSI-140 Manuale utente

golmar

golmar Stadio Plus Manuale utente

CyberData

CyberData 011211 series Manuale

Vidos

Vidos duo M1021 Manuale utente

Vimar

Vimar ELVOX 7539/E Manuale utente

SSS Siedle

SSS Siedle BTSV 850-03 Manuale utente

Dahua

Dahua VTO Series Manuale utente

Elvox

Elvox 5651 Manuale utente

Videx

Videx VIDEOKIT Series Manuale utente

Rocom

Rocom Doortello Business FW T2.05W2.04 Manuale utente

Viking

Viking E-35-EWP Manuale utente

Safeguard Supply

Safeguard Supply LRA-EX1000 Manuale utente

SSS Siedle

SSS Siedle BFCV 850 Series Manuale utente

GRD

GRD MAX V2 Manuale utente

Alecto

Alecto ADI-250 Manuale utente

Aiphone

Aiphone IE-8MD Manuale utente

Perel

Perel EDB4 Manuale utente