Breo iSeeM Manuale di istruzioni
Breo iSeeM Eye Massager
* General Instructions + App Operations
Thank you for purchasing Breo Eye Massager— iSeeM!
In order to get a better massage experience, please read this manual carefully and
keep it in a safe place for future reference.
PRECAUTIONS
1. This product can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction concerning use of
the appliance in a safe way and understand the hazards involved.
2. This product is not intended for self-diagnosis or self-treatment of conditions
that should be managed by a qualified health care provider.
3. People under medication or with medical conditions, please consult your doctor
before use. Stop operation immediately if you experience any discomfort.
4. Children shall not play with the appliance. Cleaning and user maintenance shall
not be made by children without supervision.
5. The appliance has a heated surface. Persons insensitive to heat must be care-
ful when using the appliance.
6. Do not cover the eye massager during operation. This may result in a rise in
motor temperature and subsequent malfunction or fire.
FUNCTION DEPLOYMENT
INSIDE THE PACKAGE
○
1Power On/Off Button;
Mode Selection Button
○
2Mode Indicator
○
3Micro-USB Port
○
1iSeeM Eye Massager
○
2Storage Bag
○
3Power Adapter
○
4USB Cable
○
5User’s Manual
PRESET MODES
The iSeeM Eye Massager has 3 preset massage programs .
Mode 1: SOFT
Duration: 10 minutes
Heating Function: On
Air Pressure: Off
Mode 2: MED
Duration: 10 minutes
Heating Function: On
Air Pressure: On
Mode 3: HARD
Duration: 10 minutes
Heating Function: Off
Air Pressure: On
PREPARATION
Prior to use, please check the condition of the massager and accessories:
1. No damage on power charger nor on the massager.
2. Fully charge the battery before use. Charging time is about 2.5 hours.
3. Do not use the massager during charging.
Charge
1. When the battery is low, insert the USB cable to the charging port○
2 on the con-
trol panel. Connect the adapter to the power outlet.
2. The mode indicator flashes WHITE during the charge, then stops flashing when
fully charged.
3. Please don’t try to turn on the massager while it’s being charged.
OPERATION
OPERATION
Power On
Short press the Power On/Off Button○
1 to turn on the massager. Mode2 with air
pressure and heating function starts as default.
Mode Selection
Short press the Mode Selection Button○
1 to switch between the preset 3 modes in
the sequence of: Mode3 > Mode1 > Mode2.
Power Off
The massager automatically shuts off after 10 minutes’ session. If you want to stop
the massage before the program ends, keep pressing the Power On/Off Button○
1
to turn it off.
Clean-up
The massager is not waterproof. Avoid washing it under water.
Please wipe the surface gently with a cotton cloth dipped in alcohol.
STORAGE
1. For storage periods exceeding 3 months, check that the device functions and
recharge the battery every 3 months to preserve battery life.
2. Do not place heavy objects on the device.
3. Keep good ventilation and store away from direct sunshine and corrosive gas.
TRANSPORTATION
1. The product has a simple shockproof design and can be transported by air, rail-
way, highway and ship.
2. Avoid rain, snow, impacts and always keep right side up.
How to Customize Your iSeeM through Breo App?
1. Download and install Breo app from Google Play Store for Android devices, or
App Store for iPhone or iPad.
2. Position you and your mobile device near your iSeeM Eye Massager.
3. The massager will automatically go into pairing mode once it is turned on.
4. Turn on "Bluetooth" on you mobile devices.
5. Run Breo app, go to "Add products". Your massager will show up on screen in a
few seconds. Tap "Confirm" to connect.
6. Go to "Bluetooth" settings, pair the audio Bluetooth (with a headphone icon be-
fore the device name) of the eye massager to your phone.
7. Go back to breo app, tap on “Custom mode” :
1) You can set up 3 modes per your preferences.
2) Tap on “Freq” (Frequency) to switch between High, Middle, Low.
3) Tap on “Temp” (Temperature) to select from 42 to 47ºC .
4) Tap on "Air" to adjust the pressure from min to max.
5) Tap on “Timer” to customize the working duration from 3min to 20min.
8. When you finish the settings, tap on the Start/Pause icon to start the massage.
9. You can rename the modes that you’ve settled by tapping on the pen icon.
10. If you’d like to enjoy your preferred music, run your music app and play.
Indice
Altri manuali Breo Massaggiatore
Breo
Breo INOW1180 Manuale utente
Breo
Breo iPalm520 Manuale utente
Breo
Breo 15193130 Manuale utente
Breo
Breo i See K Manuale utente
Breo
Breo iSee M Manuale utente
Breo
Breo iPalm520S Manuale utente
Breo
Breo FM D191 Manuale utente
Breo
Breo NP1 air Manuale utente
Breo
Breo iDream1168 Manuale utente
Breo
Breo i Neck air 2 Manuale utente
Breo
Breo iNeck2 Manuale utente
Breo
Breo iDream3S Manuale utente
Breo
Breo Neck N5 mini Manuale utente
Breo
Breo Acupoint mini Sport-M0210 Manuale utente
Breo
Breo iDream1260 Manuale utente
Breo
Breo Scalp Mini Pro Manuale utente
Breo
Breo iDream 5 Manuale utente
Breo
Breo iSee310 Manuale utente
Breo
Breo i Neck air 2 Manuale utente
Breo
Breo Sport MG2 Manuale utente
