Bresser Jumbo Manuale utente

(GB) INSTRUCTION MANUAL

(DE) BEDIENUNGSANLEITUNG

Art. No. 7001800CM3000

7001800GYE000

7001800QT5000

Jumbo LCD

Wanduhr · Wall Clock

English ................................................. 4

Deutsch.............................................. 12

Besuchen Sie unsere Website über den folgenden QR Code oder Weblink um weitere Informationen zu diesem Produkt

oder die verfügbaren Übersetzungen dieser Anleitung zu finden.

Visit our website via the following QR Code or web link to find further information on this product or the available

translations of these instructions.

Si vous souhaitez obtenir plus d’informations concernant ce produit ou rechercher ce mode d’emploi en d’autres langues,

rendez-vous sur notre site Internet en utilisant le code QR ou le lien correspondant.

Bezoek onze internetpagina via de volgende QR-code of weblink, voor meer informatie over dit product of de beschikbare

vertalingen van deze gebruiksaanwijzing.

¿Desearía recibir unas instrucciones de uso completas sobre este producto en un idioma determinado? Entonces visite

nuestra página web utilizando el siguiente enlace (código QR) para ver las versiones disponibles.

Desidera ricevere informazioni esaustive su questo prodotto in una lingua specifica? Venga a visitare il nostro sito Web

al seguente link (codice QR Code) per conoscere le versioni disponibili.

www.bresser.de/P7001800000000

Fig. 1

Fig. 2

Fig. 3























 

 







  



About this Instruction Manual

Please read the safety instructions and the oper-

ating instructions carefully before use.

Keep these instructions for renewed use at a later

date. When the device is sold or given to some-

one else, the instruction manual must be provid-

ed to the new owner/user of the product.

Intended Use

This product is intended only for private use. The

device is intended only for indoor use.

General Warnings

DANGER!

• Keep packaging material, like plastic bags and

rubber bands, out of the reach of children, as

these materials pose a choking hazard.

• This device contains electronic components

that operate via a power source (batteries).

Children should only use the device under

adult supervision. Only use the device as de-

scribed in the manual; otherwise, you run the

risk of an electric shock.

• Do not expose the device to high tempera-

tures. Use only the recommended batteries.

Do not short-circuit the device or batteries, or

throw them into a re. Excessive heat or im-

proper handling could trigger a short-circuit, a

re or an explosion.

ATTENTION!

• Do not immerse the unit in water.

• Do not subject the unit to excessive force,

shock, dust, extreme temperature or high hu-

midity, which may result in malfunction, short-

er electronic life span, damaged batteries and

distorted parts.

RISK of property damage!

• Do not disassemble the device. In the event of

a defect, please contact your dealer. The dealer

will contact the Service Centre and can send

the device in to be repaired, if necessary.

• Use only the recommended batteries. Always

replace weak or empty batteries with a new,

complete set of batteries at full capacity. Do

not use batteries from different brands or with

different capacities. Remove the batteries

from the unit if it has not been used for a long

time.

• The manufacturer is not liable for damage re-

lated to improperly installed batteries!

EC Declaration of Conformity

Bresser GmbH has issued a “Declaration

of Conformity” for this device (Wall Clock

/ Art.No.: 70-01800) in accordance with applica-

ble guidelines and corresponding standards of

Directive 1999/5/EG.

This declaration is available under

http://www.bresser.de/download/7001800/

CE/7001800_CE.pdf

Cleaning and Maintenance

• Before cleaning the device, disconnect it from

the power supply (Only use a dry cloth to clean

the exterior of the device. To avoid damaging

the electronics, do not use any cleaning uid.

• Protect the device from dust and moisture.

The batteries should be removed from the unit

if it has not been used for a long time.

Disposal

Dispose of the packaging materials prop-

erly, according to their type, such as pa-

per or cardboard. Contact your local waste-dis-

posal service or environmental authority for

information on the proper disposal.

Do not dispose of electronic devices in the

household garbage!

As per Directive 2002/96/EC of the European Parlia-

ment on waste electrical and electronic equipment

and its adaptation into German law, used electronic

devices must be collected separately and recycled

in an environmentally friendly manner.

In accordance with the regulations concerning

batteries and rechargeable batteries, disposing

of them in the normal household waste is explic-

itly forbidden. Please make sure to dispose of

your used batteries as required by law — at a local

collection point or in the retail market. Disposal

in domestic waste violates the Battery Directive.

General information

This item is available in the following variants.

The functions and technical data are the same

for all models. They only differ in its design/in its

colour.

• Model 7001800CM3000: black

• Model 7001800GYE000: white

• Model 7001800QT5000: gray

Scope of delivery (Fig. 1)

Wall clock (A), Remote sensor (B), Instruction

manual

Required batteries: 4 x 1.5V battery (Size AA/LR6)

and 2 x 1.5V battery (Size AAA/LR03)

Batteries are not included.

Remote sensor (Fig. 3)

21. Indicator light

22. Wall mount

23. Battery compartment

Getting started/Power supply

NOTE!

Before operating the device or when replacing the

batteries, make sure to place the batteries strictly

according to the right polarities (+/-) as shown in

the battery compartment.

Remove the cover from the wall clock battery

compartment (19).

2. Insert the batteries (4x 1.5V, AA/LR6) into bat-

tery compartment (19).

3. Wait until the indoor temperature will be dis-

played.

Remove the xing screws from the battery com-

partment (23) of the remote sensor with a small

Phillips screwdriver and remove the cover.

Parts overview (Fig. 2 and 3)

Wall clock (Fig. 2)

1. Current time

2. Symbol for active alarm

3. Symbol for active snooze

4. Symbol for RCC singnal reception

5. Humidity indoors (%)

6. Battery status indoors

7. Temperature indoors (°C or °F)

8. Humidity outdoors (%)

9. Temperature outdoors (°C or °F)

10. MEMORY button

11. SNOOZE button

12. SET button

13. Current date

14. Weekday

15. Wall mount

16. UP buuton

17. DOWN button

18. RESET button

19. Battery compartment

20. Stand (fold-out)

5. After the indoor temperature has been dis-

played, insert the batteries into the remote

sensor.

6. During the installation process, place the re-

mote sensor next to the base unit. Only posi-

tion the remote sensor and the base unit at the

desired place after a successful installation

process and position it within the effective

transmission range.

Time setting

NOTE!

After the clock received the DCF time signal the

time will be set according to the Central Europe-

an time (CET). Summer and winter time change

(and reverse) is also set automatically. Other de-

viating times can be set manually only.

Automatic time setting via DCF time signal

After inserting the batteries the time will be set

automatically via DCF signal. This process may

take a few minutes.

Initiate to receive the DCF time signal manually

NOTE!

Use this function when e.g. automatic summer/

winter time change does not work or the wall

clock temporarely receives no time signal.

1. Press and hold the DOWN button (17) for 3

seconds to start manual search for the DCF

signal.

2. Wait approx. 2-5 minutes until the current time

will be displayed.

3. If the signal for daylight saving time is received

‘DST’ will be displayed.

Manual time setting

NOTE!

It is necessary to set the time manually in places

where no radio signal is received.

If automatic radio signal reception is enanbled,

the functions of all buttons, except SNOOZE and

DOWN, are disabled. In this case press and hold

the DOWN button (17) for approx. 5 seconds until

the

LED

km/h

symbol disappears. Automatic signal re-

ception is now disabled.

1. Press and hold the SET button (12) in normal

time display mode for approx. 3 seconds to

change to time setting mode. Year gure ashes.

2. Press the UP (16) or DOWN button (17) to

change the value.

3. Press the SET button (12) again to switch to

the next setting.

4. Repeat steps 2 and 3 to set other values in

the following sequence: Month > Day > 12/24

hour mode > time zone (+/- 12 hours) > Hours

> Minutes

5. After setting the value for the minutes press

SET button (12) again to save and exit time

setting.

Alarm time setting

1. Press SET button (12) once switch to alarm

time display. The currently selected alarm time

will be displayed with AL.

2. In alarm time display mode press and hold SET

button (12) for approx. 3 seconds to switch to

alarm time setting mode. Hour gure ashes.

2. Press the UP (16) or DOWN button (17) to

change the value.

3. Press the SET button (12) again to switch to

the next setting.

4. Repeat steps 2 and 3 to set other values in the

following sequence: Minutes > Snooze interval

(1 to 20 minutes)

5. After setting the value for the snooze interval

press SET button (12) again to save and exit

alarm time setting.

Press the UP button in alarm time display mode

enable or disable the alarm. Once the alarm has

been activated, the symbol will be displayed.

NOTE!

Press the SNOOZE button when the alarm sounds

to interrupt the alarm for the desired snooze in-

terval. Press any button, except SNOOZE, to stop

the alarm.

Temperature and humidity display

After inserting the batteries indoor humidity (5)

and indoor temperature (7) will be displayed. Af-

ter rst data transmission from the remote sen-

sor the outdoor temperature (9) will be displayed.

This process may take a few minutes.

• You can switch the temperature display from

degree Celsius to degree Fahrenheit by pushing

the DOWN button (17) at the backside of the

wall clock.

• Press the MEMORY button (10) several times to

display one after another the saved maximum,

minimum and current values for temperature

and humidity.

• Press and hold the MEMORY button (10) for ap-

prox. 3 seconds during maximum value display

to delete all saved values.

Mounting/Positioning

NOTE!

Make sure you have mounted or placed the de-

vice in a safe way. Otherwise the device may fall

down and heavy damages can occur for which

the manufacturer is not liable.

The wall clock and the remote sensor can be

mounted on walls with the wall mount (9/16).

Moreover they can be placed on plane surfaces

with the fold-out table stand (14/18).

Troubleshooting

Signal disconnection

If without obvious reasons the display of the out-

door temperature goes blank, please check the

following:

1. The remote unit is still in place.

2. The batteries of both the remote unit and main

unit are not empty. Replace batteries with new

ones if necessary.

NOTE!

When the temperature falls below freezing point,

the batteries of outdoor units will freeze, lower-

Altri manuali per Jumbo

Questo manuale è adatto per i seguenti modelli

Indice

Lingue:

Altri manuali Bresser Orologio

Bresser

Bresser MyTime iO NX Manuale utente

Bresser

Bresser Jumbo Manuale utente

Bresser

Bresser MyTime 8020313CM3000 Manuale utente

Bresser

Bresser 8020312 Manuale utente

Bresser

Bresser MyTime Bath Manuale utente

Bresser

Bresser MyTime Thermo-/Hygro Manuale utente

Bresser

Bresser 8020310 Manuale utente

Bresser

Bresser 8020210GYE000 Manuale utente

Bresser

Bresser 70-01800 CM3000 Manuale utente

Bresser

Bresser MyTime iO Manuale utente

Bresser

Bresser MyTime Bath 8020113 Manuale utente

Bresser

Bresser National Geographic 90-80000 Manuale utente

Bresser

Bresser MyTime CM3000 Manuale utente

Bresser

Bresser 8020116 Manuale utente

Bresser

Bresser MyTime Silver Edition Manuale utente

Bresser

Bresser TemeoTrend SQ Manuale utente

Bresser

Bresser 80-20410 Manuale utente

Bresser

Bresser 8020215 Manuale utente

Bresser

Bresser 90-66500 Manuale utente

Bresser

Bresser Jumbo Manuale utente

Bresser

Bresser MyTime Bath Manuale utente

Bresser

Bresser MyTime Bath Mini Manuale utente

Bresser

Bresser 8020310 CM3000 Manuale utente

Manuali Orologio popolari di altre marche

Silicon Laboratories

Silicon Laboratories SI5324 Manuale utente

Heathkit

Heathkit GC-1005 Manuale utente

Oregon Scientific

Oregon Scientific PRYSMA RMR221P Manuale utente

Andrew O'Malley

Andrew O'Malley DOTKLOK Manuale utente

ALGE-Timing

ALGE-Timing ASC3 Manuale utente

Bodet

Bodet Profil 960 Manuale utente

Nixie Clock

Nixie Clock Divergence Meter Manuale utente

La Crosse Technology

La Crosse Technology WS-8256-AL Manuale utente

Mini Gadgets

Mini Gadgets MCPro Manuale utente

Casio

Casio TMR-200 Manuale utente

Progetti

Progetti ILTEMPOSTRINGE Manuale

BVItech

BVItech BV-101 Manuale utente

Progetti

Progetti KALIMERO Manuale

La Crosse Technology

La Crosse Technology WT-3141b Manuale

La Crosse Technology

La Crosse Technology W86531 Manuale utente

Sharp

Sharp SPC900 Manuale utente

La Crosse Technology

La Crosse Technology 404-50447 Manuale utente

Datexx

Datexx DF0063 Manuale utente