Brickcom NR-1100 series Manuale utente
Network Video Recorder
User Manual
1.0.0.22
Information in this document is subject to change without notice.
© Copyright 201 . All rights reserved.
Product name: Network Video Recorder
Release Date: 2015/05
Manual Revision: V1.0
Web site: www.brickcom.com
Email:
i
Table of Contents
Chapter 1.
Introduction ..............................................................................2
1.1 Hardware Description ................................................................................. 3
1.1.1 NR-1100 Series................................................................................. 3
1.1.2 NR-2100 Series................................................................................. 4
1.1.3 NR-4200 Series................................................................................. 5
1.1.4 NR-8200-RM Series.......................................................................... 6
1.2 LED Indicators Status.................................................................................... 7
1.2.1 NR-1100 Series................................................................................. 7
1.2.2 NR-2100 Series................................................................................. 8
1.2.3 NR-4200 Series................................................................................. 9
1.2.4 NR-8200-RM Series........................................................................ 11
1.3 Dual Display Solution: HDMI/VG /DVI-I Connection ........................... 13
Chapter 2.
NVR Installation......................................................................14
2.1 Remote Web Browser PC System Requirements ................................... 14
2.2 Connect to NVR ......................................................................................... 15
2.2.1 Quick Guide.................................................................................... 15
2.2.2 Install NVR Search......................................................................... 15
2.2.3 Activate Live View Service ............................................................ 21
2.2.4 Quick configuration ....................................................................... 23
2
Chapter 1. Introduction
Before You Use This Product
When you first open the product’s package, verify that all the accessories listed on
the “Package Contents” of “Quick Installation Guide” are included. Before installing
the NVR, please read the instructions in the “Quick Installation Guide” to avoid
misuse and then follow the instructions in the “Hard Disk Installation” section to
avoid damages due to faulty assembly or installation.
3
1.1Hardware Description
1.1.1 NR 1100 Series
Figure 1-1. Front & Rear View of NR-1100 Series
1. Power button
2. LED indicators: HDD
3. USB 2.0 x1 (Support auto video backup)
4. USB 2.0 x1
. Power connector
6. USB 3.0 x 2
7. DVI-I
8. eSATA x 1
9. HDMI x 1
10. Gigabit LAN
11. USB 2.0 x 2
12. Audio mic input (reserved)
13. Audio output (reserved)
4
1.1.2 NR 2100 Series
Figure 1-4. Front & Rear View of NR-2100 Series
1. Power button
2. LED indicators: HDD
3. USB 2.0 x1 (Support auto video backup)
4. USB 2.0 x1
. Power connector
6. USB 3.0 x 2
7. DVI-I
8. eSATA x 1
9. HDMI x 1
10. Gigabit LAN
11. USB 2.0 x 2
12. Audio mic input (reserved)
13. Audio output (reserved)
5
1.1.3 NR 4200 Series
Figure 1- . Front & Rear View of NR-4200 Series
1. LED indicators: LAN1, LAN2, eSATA, HDD1, HDD2, HDD3, HDD4
2. Power button
3. USB BACKUP button - Auto video backup
4. USB 2.0 x 1(Support auto video backup)
. USB 2.0 x 1
6. HDD1
7. HDD2
8. HDD3
9. HDD4
10. Gigabit LAN x 2
11. USB 2.0 x 4
12. eSATA x 2
13. VGA output
14. HDMI output
1 . DI/DO (4 in 2 out)
Top to bottom: Vcc V, GND, DI-1, DI-2, DI-3, DI-4, DO-1, DO-2
16. Reset button*
17. Power connector
18. K-lock security slot
6
1.1.4 NR 8200 RM Series
Figure 1-8. Front & Rear View of NR-8200-RMSeries
1. LED indicators: LAN1, LAN2, eSATA, HDD1, HDD2, HDD3, HDD4, HDD , HDD6,
HDD7, HDD8
2. Power button
3. USB BACKUP button - Auto video backup
4. USB 3.0 x 1 (Support auto video backup)
. HDD1
6. HDD2
7. HDD3
8. HDD4
9. HDD
10. HDD6
11. HDD7
12. HDD8
13. Gigabit LAN x 2
14. USB 2.0 x 4
1 . eSATA x 2
16. VGA output
17. HDMI output
18. DI/DO (4 in 2 out)
Right to left: Vcc V, GND, DI-1, DI-2, DI-3, DI-4, DO1, DO2
19. Reset button*
20. Power connector
7
1.2 LED Indicators Status
1.2.1 NR 1100 Series
Figure 2-3. NR-1100 Series Front Panel
Note:
**To turn off your NVR, long pressing power button at least 2 seconds.
**To turn on your NVR, long pressing power button at least 3 seconds.
Note: To reset to default, please follow below methods:
Press the power button twice with the interval of one second. In other words, please
press the power button in the 1
st
second and press the power button again in the 2
nd
second. It will be easier to operate the reset to default with the assistance of watch
or clock.
Note: Once users press reset button, configuration of Camera Setting,
Recording Settings, Event & Action Setting, E Mail Settings, and Server Settings
will reset to default. It is advised to backup system configurations. For more
information, refer to detail information in user manual .6.3 Save/Load
Configuration.
8
1.2.2 NR 2100 Series
Figure 2-4. NR-2100 Series Front Panel
Note:
**To turn off your NVR, long pressing power button at least 2 seconds.
**To turn on your NVR, long pressing power button at least 3 seconds.
Note: To reset to default, please follow below methods:
Press the power button twice with the interval of one second. In other words, please
press the power button in the 1
st
second and press the power button again in the 2
nd
second. It will be easier to operate the reset to default with the assistance of watch
or clock.
Note: Once users press reset button, configuration of Camera Setting, Recording
Settings, Event & Action Setting, E Mail Settings, and Server Settings will reset to
default. It is advised to backup system configurations. For more information, refer to
detail information in user manual .6.3 Save/Load Configuration.
9
1.2.3 NR 4200 Series
Figure 2- . NR-4200 Series Front Panel & RJ-4 Port
LED on Front Panel
LED LED Color & Status
Indicate
LAN
Off LAN Link is not established
Orange LAN Link is established
Orange blinking LAN is being accessed
eSATA Off No data transmission
Orange blinking The eSATA device is being accessed
HDD1
HDD2
HDD3
HDD4
Off Hard disk drive device is not established
Green Hard disk drive is ready to be accessed
Green blinking Hard disk drive data is being accessed
Red Hard disk drive failure and need to be removed
Power
Off Power Off
Green Power On
BACKUP
Off USB device is not detected
Blue USB device is ready
Blue blinking NVR data is being copied to the USB device
(Blinking with 1Hz)
Red Backup error occurs
Questo manuale è adatto per i seguenti modelli
3
Indice
Altri manuali Brickcom Hardware di rete
Brickcom
Brickcom NR-1604 \ Manuale utente
Brickcom
Brickcom NR-2008 Manuale utente
Brickcom
Brickcom NR-1604 \ Manuale utente
Brickcom
Brickcom NR-2104 Manuale utente
Brickcom
Brickcom NR-1104 Manuale utente
Brickcom
Brickcom BRC-64 Manuale utente
Brickcom
Brickcom NR-1000 Series Manuale utente
Brickcom
Brickcom EoC-1000M Manuale utente
Brickcom
Brickcom NR-1604 \ Manuale utente
Brickcom
Brickcom NR-2108 Manuale utente
Manuali Hardware di rete popolari di altre marche
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Manuale utente
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Manuale utente
Yudor
Yudor YDS-16 Manuale utente
D-Link
D-Link ShareCenter DNS-320L Manuale utente
Samsung
Samsung ES1642dc Istruzioni per l’uso
Honeywell Home
Honeywell Home LTEM-PV Istruzioni per il montaggio
