Bale King 6100 –Operator and Parts Manual 8 / 65
•Tampering or altering the diverter valve (steel cap removed or damaged)
VOIDS Warranty on agitator components.
•Warranty VOID if any type of spline adaptor is used between the PTO and
tractor.
Requests for warranty service should be directed to an authorized Bale King dealer. Any
repairs after the warranty period are the owner’s responsibility. Any expenses for
overtime requested by the owner to have the machine repaired during the warranty
period will be the owner’s responsibility. Warranty work will be performed at an
authorized dealers premises and no travel time will be reimbursed. Freight costs
associated with warranty repairs are not reimbursable. Warranty does not cover
downtime. Warranty will be VOID if any component is altered or modified in any
way from it’s original manufactured state, unless written permission is given by
Bridgeview Manufacturing.
Bridgeview Manufacturing Inc. reserves the right to make changes or improvements
at any time without notice or obligation.
Safety Precautions
The following safety precautions MUST be followed to ensure safe operation of the Bale
King Bale processor.
•ALWAYS turn off the PTO when leaving the operating platform.
•DO NOT stand in front of the discharge chute while the machine is in operation.
Projectiles can travel up to 50m.
•DO NOT walk or move under the bale forks unless the cylinder safety lock is in
place.
•DO NOT enter the machine while in operation.
•DO NOT clean the machine while in operation.
•DO NOT stick any device into the machine to clear debris while the machine is
in operation.
•ALWAYS turn off the machine when cleaning the machine, removing twine, or
hooking/unhooking the machine
