Brightlink BL-VW22-4K30 Manuale utente
1
BRIGHTLINK HDMI 2X2 4K Video Wall Controller
with Mixed inputs
MODEL : BL-VW22-4K30
Operating Instruction
BRIGHTLINKAV.COM
2
Directory
1. FEATURES.....................................................................................................................................3
2. NOTICE.......................................................................................................................................... 3
3. SPECIFICATIONS.........................................................................................................................3
4. PACKING CONTENTS................................................................................................................. 4
5. PANEL DESCRIPTIONS...............................................................................................................4
6. CONNECTING AND OPERATING..............................................................................................4
7. Remote Control Instruction............................................................................................................5
7.1 Video switching operation.......................................................................................................5
7.2 Video control.......................................................................................................................... 6
7.3 EDID setup interface.............................................................................................................12
7.4 Audio control........................................................................................................................ 12
7.5 Setup interface.......................................................................................................................14
7.6 INFO query information interface......................................................................................... 21
7.7 Basic information interface....................................................................................................22
8. Web Control.................................................................................................................................. 22
8.1 Interface Introduction............................................................................................................24
8.2 Login Test.............................................................................................................................24
8.3 Splicing interface.................................................................................................................. 25
8.4 Mirror interface.....................................................................................................................26
8.5 Edge interface....................................................................................................................... 27
8.6 Menu interface...................................................................................................................... 27
8.7 EDID interface......................................................................................................................28
8.8 Network interface..................................................................................................................29
8.9 System interface....................................................................................................................29
9. RS232.............................................................................................................................................30
10. Audio............................................................................................................................................31
10.1 HDMI audio output.............................................................................................................31
10.2 Audio separation output.......................................................................................................31
11. Firmware upgrade.......................................................................................................................32
11.1 MCU burn...........................................................................................................................32
11.2 GUI burn.............................................................................................................................32
12. CONNECTION DIAGRAM.......................................................................................................32
MAINTENANCE..............................................................................................................................34
3
1. FEATURES
lSupport Type C/DP port/HDMI input.
lSelect 1 of 4 source and distribute to 4 displays.
lCreate a 2x2 Video Wall Controller from any source to four displays.
lSupport multi-level cascading to create 3x3, 4x4...Video Wall (Max 10x10).
lSupport 180° rotation.
lSupport resolution up to 4K30HZ.
lSupport EDID management:Two default EDID: 4K30HZ, 1080P;user can copy
the EDID of the loop out and any output port.
lSupport HDCP2.2/1.4
lWith panel button, Remote Control, RS232 Control, TCP/IP Control to select the
source.And support for third-party platform control.
2. NOTICE
Our company reserve the right to make changes in the hardware, packaging and any
accompanying documentation without prior written notice.
3. SPECIFICATIONS
Operating Temperature Range 0 to +40°C (32 to +104°F)
Operating Humidity Range 10% to 90 % RH (no condensation)
Output Video Format Supported 1080P60/720P60/
1920X1200/1366X768/4K30HZ
Supported input resolution
The maximum input resolution supported by HDMI is
3840x2160@60hz.
The maximum input resolution supported by DP is
4K30
Transmission distance
Input: maximum---3 m
Output: 4K/30Hz---10 m
1080P/60Hz: maximum---15 m
Audio Format Supported LPCM
Input ports 2xHDMI, 1xDP, 1xType C
Output ports 5xHDMI
Splitter mode 1x4 HDMI Splitter
Video wall mode 2x2,3x3,4x4......10x10 video wall
Control Way Panel control, IR control, RS232 control
Power consumption 15watts(Maximun)
Dimension (mm) L438XW191.2XH44 mm
Weight 2460g
4
4. PACKING CONTENTS
1) Main Unit: HDMI 2X2 4K Video Wall Controller
2) 1x Power supply 12V2A
3) 4x Screws
4) 2x detachable mounting ears
5) 1x IR Cable
6) 1x Remote controller
5. PANEL DESCRIPTIONS
Front Panel
1. Input status light
2. Buttons (Input; Up; Down; Left/Menu; Right/Enter)
3. Firmware port
4. IR
5. Power button
Noted:Press the Left/Menu and Right/Enter button together for 5 seconds to reset the
system;Long press the UP and DOWN button,The device will loop through the output
resolution RearPanel
1. Power input port
2. RS232 & IP Control
3. HDMI Inputs (Type-C, DP, 2x HDMI in)
4. HDMI Outputs (HDMI Loop, SPDIF, Audio, 4x HDMI out)
6. CONNECTING AND OPERATING
1) Connect the sources into the video wall controller and Press the button on the
remote to choose the input Signal (DP, 2XHDMI, USB,Type C ).
2) Connect HDMI OUT to display equipment.
5
3) Power up the Video Wall Controller.
4) Control the Video Wall Controller by Panel button / Remote /
RS232 Command.
7. Remote Control Instruction
1. Power on/off
2. Mute
3. Source switching
4. Switch signal source of IN1
(TYPE C)
5. Switch signal source of IN2 (DP)
6. Switch signal source of IN4
(HDMI 2)
7. Switch signal source of IN3
(HDMI 1)
8. Menu
9. ▲:UP ▼:Down ◄:Left/Menu
►:Right/Enter OK:Right/Enter
10. Display and hide OSD menu
11. Return to menu interface
12. 1-4: select the input source
IN1---IN4
Note 1: Right/Enter means that when you select to the Right ,you are applying
the functionality of the option on the Righ
7.1 Video switching operation
The OSD display interface of video switching only shows four output channels and
the current input signal channels, and can only switch one input signal to all output
channels (in the case of input and output access).
6
Video switching interface
Operation mode: press the "INPUT" button directly and cycle through the input signal
7.2 Video control
Press "Left/Menu" on the panel to enter the main menu.
Main menu interface
The function of the main menu is:
1. switching video signal source
2. EDID settings
3. Audio settings
4. Setup parameter settings.
5. INFO query
Note: the number 1/ 5 represents the first subitem of the five projects
Operation Description: Use the” up and down” to select ,the “Left/ Menu” button to
return to the previous projects, and “Right/ Enter” to confirm the option
Video includes five subitem:Switching, Splicing, Mirror, Edge Set, Format.
7.2.1.Video switching
7
Any input signal can be switched to all outputs. The signal switching includes four
input signals, In1 is TYPE C input, In2 is DP input, In3 is HDMI 1 signal, In4 is
HDMI 2 signal. It is the default HDMI IN1 input.
Operation steps:
1. In the main menu, select "Video" to press the "ENTER" button to confirm.
2. Press the “up and down” button to select Switching.
3. Click the "ENTER" button to enter the next sub-item
4. Press the “up and down” button to select the "In" input port, the bottom color of
the selected input port becomes red, and the @ (Selected Symbol) is displayed
5. Click the "ENTER" button to confirm that the video switch is complete
7.2.2.Wall pattern
It can perform fixed video wall or cascade video wall Settings on the output video,
which has two setting options in this mode:
Preset: it can set up some fixed preset video wall scenarios, default to 1×1
Operational steps:
1. In the main menu, select "Video" to press the "ENTER" button to confirm
2. Press the “up and down” button to select 'Splicing'
3. Click the "ENTER" button to enter the next sub-item
8
4. Press the “up and down” button to select the "Preset" setting option, the bottom color of
the selected input port becomes red, and the @ (Selected Symbol) is displayed.
5. Click on the "ENTER" button to confirm and go to the next submenu
6. Press the “up and down “button to select "1 x 1" and other fixed preset video wall mode,
7. Click on the "ENTER" button to set up the video wall mode successfully
Set Up: H_NUM represents the total number of screens on the horizontal axis, with 1 x 10
selections, the default is 1.
V_NUM represents the total number of screens on the vertical axis, with 1 x 10 selections, which
defaults to 1.
Cascade indicates where the device is in the cascade, with options 1-25, which defaults to 1.
9
Operational steps:
1In the main menu, select "Video" to press the "ENTER" button
2Press the “up and down” button to select 'Splicing'
3Click the "ENTER" button to enter the next sub-item
4Press the “up and down”button to select the "Set Up" setting option, and the bottom color of
the selected setting option turns red
5Click on the "ENTER" button to confirm and go to the next submenu
6Press the”up and down”button to select "H_NUM",
7Click on the "ENTER" key to enter the next subitem
8Press the”up and down”button to select the number of "1" and select the number of screens
to set
9Click the "ENTER" button, the number of horizontal axis display set successfully.
10 Set up the number of vertical display screens with the above steps, and what level is the
cascade
7.2.3. Mirror mode
All output video can be mirrored, which includes four options: Normal---default mode
(do not mirror), Only X---horizontal mirror, Only Y---vertical mirror, X and Y
horizontal and vertical mirror (that is, 180 degrees rotation);
10
Operational steps:
1. In the main menu, select "Video" to press the "ENTER" button
2. Press the”up and down”button to select Mirror
3. Click the "ENTER" button to enter the next sub-item
4. Press the “up and down” button to select settings such as "Normal", and the
bottom color of the selected setting options becomes red
5. click on the "ENTER" button to confirm that the mirror processing settings are
successful
7.2.4.Margin setting
You can set the margins of the output image, including two subitems:
X: the margin setting between the two horizontal displays is set with the 0~600 option,
with a minimum unit of 2.
Y：vertical two screen in the middle of the margin settings, there are 0~600 options
to set, the minimum unit of 2.
The middle margin of horizontal and vertical display screen defaults to 0;
Operational steps:
1．In the main menu, select "Video" to press the "ENTER"button
2．Press the “up and down” button to select "Edge Set"
3．Click the "ENTER"button to enter the next sub-item
4．Press the “up and down” button to select the "X" setting option, click the
"ENTER" button to enter the next subitem.Click the “up and down”button select and
Indice
Altri manuali Brightlink Controllori
Brightlink
Brightlink BL-VW22-4K60 Manuale utente
Brightlink
Brightlink BL-VW22 Manuale utente
Brightlink
Brightlink 4U Manuale utente
Brightlink
Brightlink BL-VW33-4K Manuale utente
Brightlink
Brightlink BL-VW37-4K Manuale utente
Brightlink
Brightlink BL-VW22-4K60-GUI Manuale utente
Brightlink
Brightlink BL-VW33-4K60-GUI Manuale utente
