Brinkmann FKO PROFIBUS Manuale utente
Operating manual for PROFIBUS fieldbus | 2015-07 | V1.7 EN
Additional operating manual
PROFIBUS fieldbus
Type: FKO PROFIBUS
Status: 24/07/2015
Original Additional operating instructions
V1.7 DE
Only valid with operating manual for the FKO
Document number: DOC01.7_784xyz-0009
2Operating manual for PROFIBUS fieldbus | 2015-07 | V1.7 EN
Legal notice
BRINKMANN PUMPEN
K. H. Brinkmann GmbH & Co. KG
Friedrichstraße 2
58791 Werdohl
Germany
Tel. +49 (0)2392 5006-0
Fax +49 (0)2392 5006-180
sales@brinkmannpumps.de
Exclusion of liability
All names, trademarks, product names or other designations given in this
manual may be legally protected even if this is not labelled as such (e.g. as a
trademark). BRINKMANN assumes no liability for their free usage.
The illustrations and texts have been compiled with great care. However, the
possibility of errors cannot be ruled out. The compilation is made without any
guarantee.
General note on gender equality
BRINKMANN is aware of how language impacts on gender equality and
always makes an effort to reflect this in documentation. Nevertheless, for the
sake of readability we are unable to use non-gender-specific terms
throughout and use the masculine form instead.
© 2015 K.H. BRINKMANN GmbH & Co. KG
All rights reserved by BRINKMANN, including those of reproduction by
photocopy and storage in electronic media. Commercial use or distribution of
the texts, displayed models, diagrams and photographs appearing in this
product is not permitted.
This manual may not be reproduced, stored, transmitted or translated in any
form or by means of any medium - in whole or in part - without prior written
permission.
Operating manual for PROFIBUS fieldbus | 2015-07 | V1.7 EN 3
Contents
1. General information .........................................................................5
1.1 Information about documentation .........................................5
1.1.1 Other applicable documents ................................................6
1.1.2 Storing the documentation..................................................6
1.2 Notes in this manual..........................................................7
1.2.1 Warnings........................................................................7
1.2.2 Warning symbols used........................................................8
1.2.3 Signal words....................................................................8
1.2.4 Information notes .............................................................9
1.3 Symbols used in this manual .............................................. 10
1.4 Qualified staff ............................................................... 11
1.5 Proper use.................................................................... 11
1.6 Responsibility ................................................................ 12
1.7 Safety instructions .......................................................... 13
1.7.1 General information ........................................................ 14
2. Device and system description.....................................................15
2.1 PROFIBUS ..................................................................... 15
2.1.1 Master / slave operation................................................... 16
2.2 Scope of delivery............................................................ 16
2.3 Hardware components ..................................................... 17
2.3.1 Interfaces on the drive controller ....................................... 18
2.3.2 Pin assignment for interfaces............................................. 21
2.3.3 Cable .......................................................................... 21
2.4 Software components ...................................................... 21
3. Installation.......................................................................................22
3.1 Configuration of the drive controller for PROFIBUS .................. 23
3.2 FKO bus address ............................................................. 23
3.2.1 Setting the address on the communication card ...................... 26
3.3 Setting the field bus address via rotary switches
Switch 1/Switch 2........................................................... 27
3.4 Installing the FKO GSD file ................................................ 29
4. Accessing data via PROFIBUS .....................................................30
4.1 Cyclic data access –Process data Out................................... 30
4.1.1 Structure of Process data Out ............................................ 30
4.1.2 Structure of FKO status word ............................................. 33
4.1.3 Process data Out which can be parameterised ........................ 34
4.2 Cyclic data access –Process data In ..................................... 36
4.2.1 Structure of FKO control word............................................ 38
4.2.2 Process data In which can be parameterised .......................... 40
4.3 Non-cyclic data access / parameters.................................... 40
4.3.1 Non-cyclic data.............................................................. 41
Contents
4Operating manual for PROFIBUS fieldbus | 2015-07 | V1.7 EN
4.3.2 Direct access .................................................................41
4.3.3 Indirect access ...............................................................42
4.3.4 Parameter ....................................................................43
5. Error detection and troubleshooting............................................52
5.1 Error word of application side ............................................52
5.2 Error word of power side ..................................................53
6. EC declaration of conformity ........................................................54
Operating manual for PROFIBUS fieldbus | 2015-07 | V1.7 EN 5
1. General information
Thank you for choosing an FKO drive controller with PROFIBUS from
BRINKMANN! Our FKO line of drive controllers is designed to be universally
usable with all common motor types and bus systems.
If you have any technical questions, please call our central service hotline:
Tel.: +49 (0)2392 5006-0
Fax: +49 (0)2392 5006-180
sales@brinkmannpumps.de
1.1 Information about documentation
This documentation is a supplementary operating manual for the FKO drive
controller with the PROFIBUS bus system. It contains all the important
information you need to install and operate the bus system.
Please read the operating manuals for the drive controller and bus system
through carefully. They contain important information for operating the FKO
with fieldbus.
We assume no liability for any damage resulting from non-observance of this
manual.
This manual is an integral part of the product and applies exclusively to the
FKO with PROFIBUS from K.H. Brinkmann GmbH & Co. KG.
Provide the operator of the system with this manual so it is available when
needed.
General information
6Operating manual for PROFIBUS fieldbus | 2015-07 | V1.7 EN
1.1.1 Other applicable documents
This refers to all manuals that describe how to operate the drive controller
system and any other manuals for the equipment used.
1.1.2 Storing the documentation
Store this operating manual and all other applicable documents carefully so
they are available when needed.
General information
Operating manual for PROFIBUS fieldbus | 2015-07 | V1.7 EN 7
1.2 Notes in this manual
1.2.1 Warnings
The warnings refer to life-threatening dangers. Serious injuries possibly
resulting in death may occur.
Each warning consists of the following elements:
DANGER
Risk of death due to electrical shock!
Death or serious injury!
De-energise drive controller and secure it against being restarted.
Fig.: 1 Structure of warnings
1
Warning symbol
2
Signal word
3
Type of danger and its source
4
Possible consequence(s) of failure to comply
5
Corrective actions
1
2
5
3
4
General information
8Operating manual for PROFIBUS fieldbus | 2015-07 | V1.7 EN
1.2.2 Warning symbols used
Danger
Danger due to electrical shock and discharge
Danger due to burns
Danger due to electromagnetic fields
1.2.3 Signal words
Signal words are used to identify the severity of the danger.
DANGER
Indicates a direct hazard with a high level of risk, which, if not avoided, will
result in death or serious injury.
WARNING
Indicates a hazard with a moderate level of risk, which, if not avoided, will
result in death or serious injury.
CAUTION
Indicates a hazard with a low level of risk, which, if not avoided, may result in
minor or slight injury or property damage.
General information
Operating manual for PROFIBUS fieldbus | 2015-07 | V1.7 EN 9
1.2.4 Information notes
Information notes contain important instructions for the installation and
problem-free operation of the drive controller. These must be followed at all
times. The information notes also point out that failure to observe can result
in damage to property or financial damages.
IMPORTANT INFORMATION
The drive controller may only be assembled, operated, maintained
and installed by trained and qualified staff.
Fig.: 2 Example of an information note
Symbols within the information notes
Important information
Damage to property possible
Other notes
INFORMATION
Enlarged view
General information
10 Operating manual for PROFIBUS fieldbus | 2015-07 | V1.7 EN
1.3 Symbols used in this manual
Symbol
Meaning
1., 1., 3. …
Consecutive steps in a handling instruction
Effect of a handling instruction
Final result of a handling instruction
List
Fig.: 3 Symbols and icons used
Abbreviations used
Abbreviation
Explanation
Tab.
Table
Fig.
Figure
It.
Item
Ch.
Chapter
Indice
