BRINKS BHS-2000 Manuale utente
BHS 2000 Quick Guide
https://alpha.adt.com/help/42.html[11/8/2018 11:52:15 PM]
BHS 2000 Quick Guide
For a detailed review of the entire system, please view the BHS 2000 manual
« Help Center
Arm &
Disarm the
System
Battery Bypass
Protected
Areas
Chimes &
Beeps
Reset Security
Codes
Trouble
Conditions
Volume
Arm and Disarm
Arm:
To arm in normal mode, press the [On] button located on the system panel.
When the [On Light] begins to flash, the standard 80 second delay period has begun.
When the [On Light] becomes steady, the system is armed.
Select
BHS 2000 Quick Guide
https://alpha.adt.com/help/42.html[11/8/2018 11:52:15 PM]
To arm in instant mode, press the [On] button, then press the [Instant] button.
To arm without interior motion detectors, press the [On]button, then the [Motion Off] button.
To arm in instant mode with interior motion detectors, press the [On] button, then the [Motion Off]
button, then the [Instant] button.
Disarm:
To disarm, enter your [security code] within the 40 second delay period.
The [On Light] will no longer be lit once the system is disarmed.
For more information on this topic please visit the complete BHS 2000 manual
Battery
The BHS 2000 operates on the UB 1270 battery
Loss of AC power and use of backup battery power is indicated by NO AC.
A low battery condition is indicated by BAT.
For instructions on replacing your battery, please go to the Battery Replacement Page for this
battery.
Bypass Protected Areas
Bypassing a zone allows you to arm your system with certain protected areas intentionally unarmed or to
access a protected area when the system is armed.
To bypass a zone, press the [Options] button until the display shows [Bypass, Enter Zone #].
Enter the zone number you wish to bypass.
The display will flash the zone number and show [Ready, Bypass].
Press [On] to arm the system with zones bypassed.
To unbypass a zone, disarm the system.
For more information on this topic please visit the complete BHS 2000 manual.
Chimes and Beeps
When your system is in chime mode, a chime alert will sound three tones whenever a protected
door/window is opened.
To turn chime mode on, press the [Options] button until the window shows [Door Chime].
Enter your [security code] to select this option. The display window will show [Ready Door Chime].
BHS 2000 Quick Guide
https://alpha.adt.com/help/42.html[11/8/2018 11:52:15 PM]
To turn Chime mode off, [Cancel], otherwise it will turn off automatically when the system is turned
on.
For more information on this topic please visit the complete BHS 2000 manual.
Reset
To reset the system after an alarm event, first enter your [security code].
Then, to view the event, press the [Options] button until the display shows [Alarm Memory, Enter
Code] + your [security code].
Security Codes
Your system allows up to 6 different security codes for use by other users.
To add a user code, press the [Options] button until the display window shows [Auxiliary Code,
Enter Master Code].
Enter your [Master Security Code].
Select the desired number to assign. The window will then show [Enter New Code].
Enter the new user’s code.
The keypad will audibly confirm that the system accepted the new code.
To delete a user code, press the [Options] button until the display window shows [Auxiliary Code,
Enter Master Code].
Enter your [Master Security Code]. The window shows [Enter 1-6].
Enter the user number you would like to delete.
The display will show [Enter New Code]. Do not enter the auxiliary code. Press [Cancel] to delete the
code.
The keypad will audibly confirm the deletion from the system.
For more information on this topic please visit the complete BHS 2000 manual.
Trouble Conditions
Trouble conditions are issues that require your attention and are indicated on your panel’s display by:
No AC to indicate the use of backup battery.
Low Batt to indicate a low battery condition.
Zone number to indicate a zone has been tripped.
Line cut to indicate an interference with the telephone line.
All Trouble Condition alarms can be silenced by pressing the [Cancel] button, however the Trouble
Condition alarm will sound intermittently until the condition no longer exists.
Altri manuali per BHS-2000
1
Indice
Altri manuali BRINKS Sistema di apertura della porta
