Brodit 516042 Manuale utente

Product 516042

516042 Holder with Pass-Through Connector For a more secure upright and horizontal position. Adjustable

holder, fits devices with skins.

This is the choice for you who are using your iPhone with navigation and easily want to switch between an upright

position and a horizontal position - simply turn the holder into desired position. When installing, place the holder

in the desired position (upright/horizontal) that you will be using as standard. The holder is adjustable and fits

devices with skins. The holder provides a more secure upright and horizontal position than a standard holder.

The holder is equipped with a pass-through connector. This means that all cables that can be used with the

iPhone can also be used with the holder, for example a charging cable or an interface cable. When you have

attached the cable to the holder it is firmly in place and you do not have connect it manually to the device each

time you put the iPhone in the holder. You can run the cable through the back part of the holder for a cleaner

look. (Cable not included)

The holder is attached to a tilt swivel, this means you can adjust the angle of the device in order to avoid light

reflection on the screen. Attach onto ProClip Mounting Platform.

EAN: 7320285160422

Item no 516042 fits:

Apple iPhone 3G (For all countries)

Apple iPhone 3GS (For all countries)

1(2)

1. 2.

INSTALLATION INSTRUCTIONS

4.3.

Please read all of the instructions and look at the pictures before attaching the holder.

1. To adjust the holder to your unit: Loosen the screws on the back side of the holder, so the sides of the holders

can be adjusted. Place the unit in the holder and press the sides together so the unit is firmly in place. Screw on

the screws on the back side of the holder.

2.To install the holder. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching

plate on the back. Place the attaching plate on desired position. Screw the attaching plate into place with the

enclosed screws. Place the holder over the attaching plate so the tilt swivel fits. Screw the holder onto the

attaching plate. You can easily switch between an upright and a horizontal position, simply by turning the holder

into desired position.

3. To place the device in the holder: Place the bottom part of the device into the holder. Press the top of the

device forward and in the same time slide the device downward into place in the holder.To remove the device

from the holder: Press the upper part of the holder forward. When the device is set free, lift it upward out of the

holder.If you are using a cable to your device: Press the cable into place in the cable holder in the bottom part of

the holder. The cable will then be held in place giving a neat installation.

4. The holder is in place.

2(2)

Indice

Altri manuali Brodit Accessori per automobili

Brodit

Brodit ProClip 854676 Manuale utente

Brodit

Brodit ProClip 855116 Manuale utente

Brodit

Brodit ProClip 855113 Manuale utente

Brodit

Brodit 712026 Manuale utente

Brodit

Brodit 213484 Manuale utente

Brodit

Brodit 852598 ProClip Manuale utente

Brodit

Brodit ProClip 853014 Manuale utente

Brodit

Brodit ProClip 804455 Manuale utente

Brodit

Brodit ProClip 853044 Manuale utente

Brodit

Brodit 513424 Manuale utente

Brodit

Brodit ProClip 854590 Manuale utente

Brodit

Brodit ProClip 854857 Manuale utente

Brodit

Brodit ProClip 804934 Manuale utente

Brodit

Brodit 272011 Manuale utente

Brodit

Brodit ProClip 835009 Manuale utente

Brodit

Brodit 841488 Manuale utente

Brodit

Brodit PDA Holder Manuale utente

Brodit

Brodit 727002 Manuale utente

Brodit

Brodit 512209 Manuale utente

Brodit

Brodit 854329 Manuale utente

Brodit

Brodit 511277 Manuale utente

Brodit

Brodit 711148 Manuale utente

Brodit

Brodit ProClip 854388 Manuale utente

Brodit

Brodit ProClip 853267 Manuale utente

Manuali Accessori per automobili popolari di altre marche

James Baroud

James Baroud Odyssey Manuale utente

Motorola

Motorola i50sx Manuale utente

Yakima

Yakima 9MM STANDARD BIKE MOUNT Manuale utente

Feniex

Feniex T3 Manuale utente

Renault

Renault 77 11 423 180 Manuale utente

Kia

Kia E8300-4D000 Manuale utente

Brink

Brink 756843 Manuale utente

Whispbar

Whispbar K085W Manuale utente

v.link

v.link CI-VL2-PC-HSD Manuale utente

Viking

Viking Stack-Rack Guida rapida alla configurazione

Aries

Aries 203015 Manuale utente

Choetech

Choetech AT0005 Manuale utente

ZZ2

ZZ2 ZZAIR-PRO Manuale utente

Holman

Holman 4A80L Manuale utente

Thule

Thule 2075 Manuale utente

Motorola

Motorola T325 Manuale utente

TAUBENREUTHER

TAUBENREUTHER 16-3950 Guida all'installazione

DV8

DV8 FBJL-02 Manuale utente