Brookstone BKSRGBSTRP Manuale utente
Smart LED Strip
WHITE & COLORCHANGING
For more products please visit www.brookstone.com
USER MANUAL
FCC ID: 2A2Q7-BKSRGBSTRP
For more products please visit www.brookstone.com
FCC Statement:
1. This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Caution: The user is cautioned that changes or modifications not
expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
2. This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment. This equipment should be
installed and operated with a minimum distance of 20cm between
the radiator and any part of your body.
For more products please visit www.brookstone.com
SPECIFICATIONS
Model: BKSRGBSTRP
Power Supply: USB
Input Voltage: 5V
Protection Rating: IP24
Color RGB: 220°
LED: 5050
Operating Temperature: -4°F - 122°F
LED Strip Length: 9.84 feet
Wireless type: Wi-Fi 2.4GHz
Wireless Standard: IEEE 802.11b/g/n
WARRANTY INFORMATION
One Year Limited Warranty.
©Smartpoint LLC,
250 Liberty Street, Suite 1A
Metuchen, NJ 08840
The BROOKSTONE trademark. names and logos are owned by
BKST Brand Holdings LLC ©2021. All rights reserved.
Manufactured, marketed and distributed by Smartpoint LLC, under license.
Amazon, Alexa and all related logos are trademarks of Amazon.com, Inc. or its affiliates.
Google, Android, Google Play and Google Home are trademarks of Google LLC.
App Store
®
is a registered trademark of Apple, Inc.
All trademarks and registered trademarks are property of their respective owners.
Made in China
FEATURES
• Wi-Fi remote controlled
• Changes to 16 million different colors
• Dimmable & Programmable with Schedule
• Syncs with music
• Can be cut to size
• 3M Adhesive back
• App and Voice Control
• Works with Hey Google or Amazon Alexa
Items included in package:
Smart LED Strip and User Manual.
DOWNLOAD APP
1. Android™: download “Brookstone Smart” app
on Google Play.
2. iPhone: download “Brookstone Smart” app
from the App Store.
Brookstone Smart
REGISTRATION AND LOGIN
1. Run the “Brookstone Smart” app from your
smart phone.
2. Register and login.
*Screenshots may slightly differ from actual app.
*
ADD DEVICE
1. Make sure phone is connected to your
Wi-Fi network and that it is a 2.4GHz network
and Bluetooth is turned on in your phone
settings.
2. Plug in the LED Strip into a USB port that has
power. If the lights start blinking fast they are
in set up mode and you can proceed to step 3.
If they are not blinking fast, press and hold
the on/off button down for 5-7 seconds and
let go. Lights should then start to blink fast
and then they are in set up mode.
3. From the home screen of the App, press the
(+) symbol in the top right corner.
4. A pop up window will automatically appear
asking to add the LED Strip. Press “Go to
add”. On the next screen, click on the (+) icon.
5. Make sure your phone is connected to the
Wi-Fi network that the device will be
connected to. Enter your password for the
correct Wi-Fi network and press confirm.
6. Connecting process will begin. Do not turn off or
unplug LED Strip or phone while connecting.
Wait for connection process to complete.
7. Once device has been successfully added, name
the device what you would like it to be called in
the app. The LED Strip is now ready for use.
Indice
Altri manuali Brookstone Attrezzatura di illuminazione
