Brother MFC-5200C Manuale utente
FACSIMILE EQUIPMENT
SERVICE MANUAL
MODEL: MFC5200C/MFC890
© Copyright Brother 2002
All rights reserved.
No part of this publication may be reproduced in any
form or by any means without permission in writing
from the publisher.
Specifications are subject to change without notice.
PREFACE
This publication is a Service Manual covering the specifications, construction, theory of operation,
and maintenance of the Brother facsimile equipment. It includes information required for field
troubleshooting and repair--disassembly, reassembly, and lubrication--so that service personnel
will be able to understand equipment function, to rapidly repair the equipment and order any
necessary spare parts.
To perform appropriate maintenance so that the facsimile equipment is always in best condition
for the customer, the service personnel must adequately understand and apply this manual.
This manual is made up of eight chapters and appendices.
SAFETY INSTRUCTIONS
CHAPTER 1 PARTS NAMES & FUNCTIONS
CHAPTER 2 SPECIFICATIONS
CHAPTER 3 INSTALLATION
CHAPTER 4 THEORY OF OPERATION
CHAPTER 5 MAINTENANCE
CHAPTER 6 DISASSEMBLY/REASSEMBLY, LUBRICATION, AND ADJUSTMENT
CHAPTER 7 MAINTENANCE MODE
CHAPTER 8 TROUBLESHOOTING
Appendix 1. Serial No. Descriptions
Appendix 2. Installation
Appendix 3. EEPROM Customizing Codes
Appendix 4. Firmware Switches (WSW)
Appendix 5. Re-packing Instructions
Appendix 6. Wiring Diagram
Appendix 7. Circuit Diagrams
This manual describes the models and their versions to be destined for major countries. The specifications
and functions are subject to change depending upon each destination.
SAFETY INSTRUCTIONS
SAFETY PRINCIPLE
1) Before starting any operations, read this manual thoroughly. Especially read the safety instructions in this
section carefully and ensure that you understand the contents.
2) Perform all the operations by following the procedures described in this manual. Follow all the cautions
and warnings set out in the procedures and on safety labels affixed to the machine. Failure to do so may
result in human injury or equipment damage.
3) Perform only the procedures explained in this manual. Refrain from opening or touching any portions that
are not related to your required operation(s).
4) Repair and replacement of parts should be performed by trained and qualified persons only.
Operators should not attempt to do such repair or replacement work.
5) It must be appreciated that the above-mentioned cautions and warnings do not cover everything because it
is impossible to evaluate all the circumstances of repair situations.
SPECIAL SAFETY INFORMATION
Cautions and warnings are made clear by following the 'Safety Alert Symbols' or 'Signal Words' such as
DANGER, WARNING and CAUTION.
1) SAFETY ALERT SYMBOL
This is the safety alert. When you find this symbol placed on the equipment or marked in this manual, be
aware of the potential of human injuries. Follow the recommended precautions and safety operation
practices.
2) Understanding Signal Words
DANGER is used to indicate the presence of a hazard which will cause severe human injuries or a fatal
accident if the warning is ignored.
WARNING is used to indicate the presence of a hazard or unsafe practices which may cause severe
human injuries or a fatal accident if the warning is ignored.
CAUTION is used to indicate the presence of a hazard or unsafe practices which may cause minor human
injuries if the warning is ignored. CAUTION also calls your attention to safety messages in this manual.
3) Follow Safely Instructions
Carefully read all the safety messages set out in this manual and also in the safety warning signs placed
on the equipment. In this manual, the safety instructions (safety alert symbols and signal words) are
enclosed in a rectangular enclosure to bring them to your attention.
Keep the safety signs on the equipment in good condition and ensure none are missing or damaged.
Replace the safety signs if unreadable or damaged. Learn how to operate the equipment and how to use
the controls properly. Do not let anyone operate this equipment without following the instructions. Keep
the equipment in proper working condition.
Unauthorized modification to the equipment may impair the function & safety and affect the life of the
equipment.
Listed below are the various kinds of "WARNING" messages contained in this manual.
4) Caution for the battery
There is a danger of explosion if the battery is incorrectly replaced. Do not replace the battery. Do not
disassemble, recharge or dispose of in fire.
Used battery should be disposed of according to local regulations.
WARNING
HAZARDOUS VOLTAGE
May cause serious injuries or fatal accidents. Voltage is now applied from the power
supply of machine. There is a danger of electrical shock if you touch the active area
inside the machine.
Be sure to turn the power supply switch OFF and pull the plug out from the power outlet
before starting maintenance work on the machine.
CAUTION
ROTATING PARTS
Be aware of the potential danger of various rollers and take care not to get your fingers or
hand caught into the machine, this can cause serious injuries. Note that the exit roller that
ejects the printed paper is rotating while printing.
Be careful not to get your hair, fingers, hands, sleeve or necktie caught in the machine
while operating the machine.
CAUTION
POWER CORDS & PLUGS
This machine is equipped with a 3-wire power cord fitted with a 3-pronged plug (bi-polar
plug with grounding) for the user’s safety.
Use these power cords in conjunction with a properly grounded electrical outlet to avoid
an electrical shock.
CAUTION
SAFETY INTERLOCK
The scanner unit of this machine have electrical safety interlocks to turn the power of
f
whenever they are opened.
CHAPTER 1
PARTS NAMES & FUNCTIONS
CHAPTER 1 PARTS NAMES & FUNCTIONS
CONTENTS
1.1 EQUIPMENT OUTLINE ...................................................................................................1-1
1.2 CONTROL PANEL...........................................................................................................1-3
1-1
1.1 EQUIPMENT OUTLINE
Front view
Rear view
10. Paper support
13. Manual feed slot
12. Rear cover
11. Paper tray
3. ADF document support
5. Document tray
4. Document guide base
7. Control panel
9. Output paper support
6. Scanner unit
1. ADF
8. Main cover
2. ADF cover
1-2
No. Part name Outline of functions
1 ADF Automatically feeds the document sheet by sheet to
the reading unit.
2 ADF cover Open this cover when removing jammed documents
from the ADF.
3 ADF document support Supports the documents fitted to the ADF so that they
do not bend.
4 Document guide base Adjusts the document position to the center of ADF.
5 Document tray Stores the read documents.
6 Scanner unit Indicates the whole reading unit including the control
panel. Open this unit when changing the ink cartridge.
7 Control panel Displays the machine operation status and is used to
operate the machine.
8 Main cover Indicates the whole enclosure of the machine.
9 Output paper support Stores the printed sheets of paper.
10 Paper support Supports the paper fitted to the paper tray so that they
do not bend.
11 Paper tray Automatically feeds the paper sheet by sheet to the
printing unit.
12 Rear cover Indicates the rear enclosure. Open this cover when
doing maintenance work.
13 Manual feed slot
Used to feed the paper sheet by sheet manually.
Open the slot cover when removing jammed paper
from the machine.
Altri manuali per MFC-5200C
5
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Brother Fax
Brother
Brother FAX-565 Manuale utente
Brother
Brother IntelliFax-775SI Guida di riferimento
Brother
Brother T94 Manuale utente
Brother
Brother FAX-1010 Manuale utente
Brother
Brother FAX-2800 Manuale utente
Brother
Brother MFC-1650 Manuale utente
Brother
Brother MFC-890 Manuale utente
Brother
Brother FAX 2750 Manuale utente
Brother
Brother FAX-520DT Manuale utente
Brother
Brother FAX-2890 Manuale operativo
Brother
Brother MFC-7050C Manuale utente
Brother
Brother FAX-1010 Manuale utente
Brother
Brother IntelliFAX 2300ML Manuale utente
Brother
Brother FAX-878 Manuale utente
Brother
Brother MFC 3420C - Color Inkjet - All-in-One Manuale utente
Brother
Brother MFC 240C - Color Inkjet - All-in-One Manuale utente
Brother
Brother MFC 640CW - Color Inkjet - All-in-One Manuale utente
Brother
Brother FAX 275 Manuale utente
Brother
Brother FAX 560 Manuale utente
Brother
Brother 1030e Manuale utente
