Brother P-touch RL-700S Manuale utente

User's Manual

●Please read this manual before using the printer.

●Keep this manual in a convenient place for future reference.

RL-700S RFID Label Printer

DRAFT

Introduction

Thank you for purchasing the RL-700S.

The RL-700S (hereafter, referred to as "this machine") is a RFID label printer that enables you to

easily create custom labels with IC tag (RFID) and read/write the IC tag (RFID) with equipped

reader/writer after it is connected to a computer. With this machine, you can use not only SZ tapes

(RFID labels), but also TZ tapes and HG tapes which available in the market to create the labels.

About the machine

• We shall not be liable to you or others for any damage, loss of any equipment, media,

programs, or data, and any claims of third parties arising out of the use of this product.

• The rights and copyrights of bundled software (including but not limited to the program,

images, clip art, templates and text incorporated into the software) and attached manuals and

other documents, and any copies of the software, are owned by Brother Industries, Ltd. and

its suppliers. The user may not resell, duplicate, change, reverse-engineer, disassemble, or

decompile any part of the above software without prior written permission.

About the manual

• This manual contains various precautions and basic procedures. Be sure to read this manual

before using the machine.

Afterward, keep this manual in a safe place for future reference.

• The contents of this manual are subject to change without notice.

• No part of this manual may be reproduced in any form, including photocopying or reprinting,

without prior consent.

• This manual has been carefully created. However, if you notice an error or something

questionable, feel free to contact us.

About the trademarks

•Microsoft

®, Windows®are registered trademarks of Microsoft Corporation in the US and other

countries.

• Adobe®, Acrobat®and Adobe®Reader®are registered trademarks of Adobe Systems

Incorporated.

• I-CODE SLI is registered trademarks of NXP Semiconductors (former Philips

Semiconductors).

• All other software and product names mentioned are trademarks or registered trademarks of

their respective companies.

Federal Communications Commission (FCC) Declaration of Conformity (For USA Only)

Responsible Party: Brother International Corporation

100 Somerset Corporate Boulevard

Bridgewater, NJ 08807-0911 USA

TEL: (908) 704-1700

declares that the product

Product Name: RFID Label Printer P-touch R

Model Number: RL-700S

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV technician for help.

• The enclosed interface cable should be used in order to ensure compliance with the limits

for a Class B digital device.

• A shielded interface cable should be used in order to ensure compliance with the limits for

a Class B digital device.

• Changes or modifications not expressly approved by Brother Industries, Ltd. could void the

user's authority to operate the equipment.

Contents

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

About the machine .............................................................................................. 2

About the manual................................................................................................ 2

About the trademarks.......................................................................................... 2

Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Before Use 5

Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Installation Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

General Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Printer ................................................................................................................. 8

SZ (RFID) Tape .................................................................................................. 9

Part Descriptions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Front face.......................................................................................................... 11

Rear view .......................................................................................................... 11

Button................................................................................................................ 12

Lamp Display .................................................................................................... 12

Installing the Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Software Overview............................................................................................ 13

Preparing For Installation.................................................................................. 14

Software Installation Procedure ........................................................................ 15

Using RFID Labels 19

Reading and Writing Data on RFID Labels. . . . . . . . . . . . . . . . . . . . 19

Experience RFID Label Applications (Sample Applications) . . . . . . 20

Overview of Sample Applications ..................................................................... 20

Using the Sample Applications ......................................................................... 22

Main Specifications 23

Product Specifications ...................................................................................... 23

System Requirements....................................................................................... 24

Before Use

Safety Precautions

To prevent injury or damage, follow all warnings and caution informations with following symbols.

The symbols used in this manual are as follows:

tells you about the information you must be aware.

tells you the procedures you must avoid.

tells you the procedures you must follow.

tells you about the information you must know when operating the printer or using the

software.

Warning

AC Adapter

Follow these guidelines to avoid fire, electric shock, or failure.

• Do not use voltages or adapters other than the specified voltage (100-240 V) and the

included AC adapter (AD9100).

• Do not overload the electric outlet.

• Do not damage or modify the power cord or plug. Also, do not put furniture or heavy

objects on the power cord, and do not bend or pull it forcibly.

• Do not use the damaged power cord.

• Do not touch the AC adapter or power plug with wet hands.

• Insert the plug fully to the electric outlet. Avoid using electrical outlets that do not allow

a secure connection.

• Do not disassemble or modify the AC adapter.

• Do not use in places of high humidity.

Warning Tell you what to do to avoid the risk of injury.

Caution Tells you about procedures you must follow to prevent injury or damage

to the printer.

Before Use

Warning

Printer

Follow these guidelines to avoid fire, electric shock, or failure.

• Do not disassemble or modify the printer.

• Do not drop or step on, or apply high impact.

• Do not wet the printer with coffee, juice, or water from cups or containers.

• Do not use the printer if foreign objects are in it.

• Stop using the printer when you notice abnormal odor or smoke.

• Do not touch the printer if your hands are wet.

• For internal inspection, adjustment, or repair, contact your dealer or authorized

service center. (We shall not liable for any damage from customer disassembly or

modification, even if within the warranty period.)

• If the printer is damaged, liquid, or foreign objects get inside (particularly metallic

objects), turn off and unplug the printer immediately, and contact your dealer or

authorized service center.

• If you notice abnormal odor, heat, discoloration, deformation, or anything unusual

when the printer is in use or being stored, unplug the printer and stop using it.

• As a reader/writer for RFID devices, the printer emits radio waves. It may affect the

operation of medical equipment, depending on how and where the printer is used. To

minimize any interference by the printer, strictly follow this guideline.

Patients wearing pacemakers or other implanted medical devices should not allow

their device to reach within 8.8” (22 cm) of antennas in RFID equipment or modular

reader/writers, including this printer.

• Do not wear a packing plastic bag.

To avoid a risk of suffocation, dispose or keep the plastic bag at the place children

cannot reach.

• The printer is a communication device using 13.56 MHz radio waves on the ISM band.

It may generate interference, depending on how and where the printer is used. To

minimize the effect of any interference, we recommend checking interference by or to

the printer in advance. Be extremely careful when you use it near radio astronomy or

medical equipment. The printer may also affect operation of the equipment.

Before Use

Caution

AC Adapter

• If the printer will not be used for an extended period, disconnect the AC adapter from

the printer and electrical outlet.

Tape Cutter

• To avoid injury, do not touch the tape cutter.

Installation and Storage

• To avoid injury, do not put the printer on a unstable environment, such as dilapidated

table or top of the shelf.

• To avoid injury, do not place any heavy objects on top of the printer.

Labels

• Depending on the location, material, and environmental conditions, the label may

have the difficulties to peel or unpeel, the color of the label will be changed, or

transferred to other objects. In prior to adhere the label, check the environmental

condition and the material, and then test the label by affixing a small piece of it to an

inconspicuous area of the intended surface.

Installation Precautions

• Do not bring IC tags (non-contact RFID tags) within 2" (50 mm) in front of, above, or on the

right side of the printer when the printer is in use. If you do so, it may interfere with the data

writing during printing. Even beyond this range, some types of RFID tags may interfere with

writing. Be extremely careful when using high-sensitivity RFID tags.

• Do not put the printer within the read range of other RFID reader/writers. It may interfere with

the data writing during printing. Conversely, this printer may also interfere data reading or

writing by other reader/writers.

• Do not put other RFID reader/writers within the printer's read range, which may interfere data

writing during printing. Conversely, this printer may also interfere data reading or writing by

other reader/writers.

Before Use

General Precautions

Printer

• To avoid accidents or damage, follow the instructions written in this manual.

• Use only genuine Brother accessories and supplies ( (1” (24 mm)), (9/64” - 1/2” (3.5

mm - 36 mm)), or (1/4” - 1/2” (6 - 36 mm)) mark.

• Do not insert or remove the tape forcibly.

• Do not insert any foreign objects into the label output slot, AC adapter inlet, or USB port. Do

not obstruct these areas.

• To avoid damaging the print head, do not attempt to print labels with used tape casettes or

without inserting the tape casette.

• Do not touch the print head.

• Do not use paint thinner, benzene, alcohol, or other volatile organic solvents to clean the

printer.

• Avoid using or storing the printer in direct sunlight or near heaters or sources of open flame,

or where it is exposed to extremely high or low temperatures, high humidity, or excessive dust.

The recommended environmental temperature range is 50°F (10°C) - 95°F (35°C).

• Do not scratch the CD-ROM and place the CD-ROM onto the place with extremely high or

extremely low temperatures.

• The software contained on the CD-ROM is meant for use with the printer only. See License

on CD for further details. This software may be installed on multiple personal computers for

use at an office, etc.

• Use only the USB cable included with the printer.

The printer is not designed or manufactured for applications requiring an extremely high

level of safety, such as in nuclear reaction control systems of nuclear power plants,

aircraft autopilot systems, air traffic control towers, driving control of mass transit

systems, life-support systems, missile launch control of defense systems, or other

applications posing a direct, significant risk of injury, loss of life, or damage if safety

cannot be ensured.

Before Use

SZ (RFID) Tape

• TZ and HG tapes can be set their label length up to 4" (100 mm) but SZ tape can be set its

label length from 2.14" (53.5 mm) to 4" (100 mm) with P-touch Editor or the printer driver. Also,

note that the portion after the specified length up to the next label will be blank.

• On SZ tape, a number in the format xx/30 is printed in the leading margin of labels. (xx is a

number in the range 2-30.) This number indicates what label it is among the 30 RFID tags in

the cassette.

When all 30 labels are used, END will be printed on the label. Replace it with the new cassette.

• RFID tags are in the leading portion of labels printed on SZ tape. Avoid cutting or damaging

this portion, which may impair or disable the RFID tag.

• If ERROR is printed in the trailing portion of a label, an error occurred when writing data to the

RFID tag. Make sure no reader/writers or other devices interfering with access to the RFID

tags and try printing again.

• To avoid damaging cassettes and preventing further use, do not pull out the tape.

• To avoid rendering data unreadable, do not apply labels to metal objects, electronic devices,

or other RFID tags.

02/30

03/30

Half-Cut

Up to 4" (100 mm)

At least 2.14" (53.5 mm)

Amount Used

RFID Tag

ERROR

02/30

Print Data

Half-Cut

Before Use

• Data reading may be significantly impaired if labels are applied directly to moist surfaces or

near them. Test operation before applying labels to surfaces.

• Do not bring SZ tape cassettes or RFID tags within 2” (50 mm) in front of, above, or on the

right side of the printer when it is in use. This may interfere data writing during printing.

• Do not bring SZ tape cassettes within the read range of other RFID reader/writers. This may

interfere data writing during printing.

• To avoid damaging labels, do not bundle the tape, put objects on it, or stretch it using hard

objects. Do not apply labels to objects where they will be subjected to strong vibration or

impact.

• Check where you will apply labels before applying them.

Once labels are applied, you cannot reapply them elsewhere after peeling them off.

• Do not attempt to disassemble the cassettes or labels.

• Depending on environmental conditions and the location and material of objects labeled,

labels may peel away, become irremovable, or leave a residue. Also, the label color may

change over time, and the surface underneath may be damaged.

• Do not apply labels to skin.

• Before use, take up any slack in the ribbon by winding it in the direction shown 2 - 3 times

around.

• Note that the margin of the first label printed is larger than other labels.

• To avoid label damage or data loss, do not use labels in extremely high or low temperatures.

• Note that applying labels to curved surfaces will lower the read rate because the antenna will

be curved. Extremely curved surfaces may interfere reading, and the tape may peel off.

• Do not bend labels, which may break the antenna or damage the RFID tag.

• To avoid fire, do not put labels in microwave ovens.

• This product uses I-Code SLI RFID chips manufactured by NXP Semiconductors.

These chips are compatible with reader/writers conforming to ISO/IEC 15693 and 18000-3

standards. (Operation is not guaranteed with all reader/writers.)

• When introducing a system based on SZ tape labels, check the environment of use carefully

to ensure correct operation before use.

• When tape or labels are no longer needed, cut the RFID tag portion or take other measures

to interfere data reading or writing before disposal.

Altri manuali per P-touch RL-700S

Indice

Altri manuali Brother Etichettatrice

Brother

Brother P-touch PT-1290 Manuale utente

Brother

Brother P-touch D450 Manuale utente

Brother

Brother PT-1230PC - P-Touch 1230PC B/W Thermal Transfer... Manuale utente

Brother

Brother QL 570 - P-Touch B/W Direct Thermal Printer Manuale utente

Brother

Brother PT 300 - P-TOUCH LABELING SYSTEM Manuale utente

Brother

Brother P-touch PT-2030 Manuale utente

Brother

Brother P-Touch PT-1180 Manuale utente

Brother

Brother PT 2300 - P-Touch 2300 Thermal Transfer... Manuale utente

Brother

Brother P-Touch PT-12 Manuale utente

Brother

Brother PT1090 - P-Touch - Labelmaker Guida utente

Brother

Brother PT-H300/H300LI Manuale utente

Brother

Brother p-touch D800W Manuale utente

Brother

Brother P-touch PT-9600 Manuale utente

Brother

Brother P-touch PT-2700 Manuale utente

Brother

Brother PT-1230PC - P-Touch 1230PC B/W Thermal Transfer... Guida rapida

Brother

Brother QL-1050 Manuale utente

Brother

Brother P-touch 2030 Manuale utente

Brother

Brother QL-1110NWB Manuale utente

Brother

Brother P-touch 1900 Manuale utente

Brother

Brother P-Touch PT-H300LI Manuale utente

Brother

Brother QL-700 Manuale utente

Brother

Brother P-touch PT-9600 Manuale utente

Brother

Brother P-touch PT-2700 Manuale utente

Brother

Brother QL-1100 Manuale utente

Manuali Etichettatrice popolari di altre marche

newell

newell Dymo LabelManager 210D Manuale utente

U-Line

U-Line BROTHER H-8754 Manuale utente

Tharo Systems

Tharo Systems H-435+ Manuale utente

Godex

Godex RT700 SERIES Manuale utente

ID Technology

ID Technology 252 Manuale utente

Labelmate

Labelmate MC-11 Manuale utente

CAB

CAB XD4M/300 Manuale utente

Avery Dennison

Avery Dennison Pathfinder 6057 Manuale di servizio

TSC

TSC PEX1000 Series Manuale utente

Adkins

Adkins Label Master Manuale utente

Epson

Epson LabelWorks LW-400 Manuale utente

Primera

Primera 510212 Manuale utente

Brady

Brady BradyPrinter S3100 Manuale utente

DuraLabel

DuraLabel LabPRO Manuale utente

Novexx Solutions

Novexx Solutions XLP 604 Manuale utente

Epson

Epson LabelWorks LW-400 Manuale utente

Dymo

Dymo LabelManager 420P Manuale utente

Epson

Epson LW-PX400 Manuale utente