Bryton rider 310 Manuale utente
User's Manual
Table of Contents
2
Getting Started................ 4
Your Rider 310 ............................. 4
Accessories .................................. 5
Status Icons ................................. 5
Step 1: Charge your Rider 310 ... 6
Step 2: Turn On Rider 310........... 6
Step 3: Initial Setup..................... 6
Step 4: Acquire Satellite
Signals.......................................... 7
Step 5: Ride Your Bike with
Rider 310...................................... 7
Reset Rider 310 ........................... 7
Share Your Records ..................... 8
Training ............................ 9
Simple Workouts ......................... 9
My Workout ............................... 10
Stop Training ............................. 11
View Exercise/Training
Record ........................................ 11
History Flow............................... 12
Settings .......................... 13
Smart Lap................................... 13
Altitude...................................... 14
Data Page .................................. 15
Sensors....................................... 17
Personalize User Prole............19
Change System Settings........... 21
View GPS Status ........................ 23
View Software Version.............. 24
Appendix........................ 25
Specications ............................ 25
Battery Information.................. 26
Install Rider 310 .......................... 27
Install the Speed/Cadence/
Dual Sensor (Optional) ............. 28
Install Heart Rate Belt
(Optional)................................... 29
Wheel Size and
Circumference ........................... 30
Basic Care For Your Rider 310... 31
Table of Contents
Screen Terminologies ............... 32
ENGLISH
Getting Started 3
WARNING
Always consult your physician before you begin or modify any training program. Please read
the details in Warranty and Safety Information guide in the package.
Product Registration
Help us better support you by completing your device registration using Bryton Update Tool.
Go to http://support.brytonsport.com for more information.
Bryton Software
Go to http://brytonsport.com to download free software to upload your personal prole,
tracks and analyze your data on the web.
Australian Consumer Law
Our goods come with guarantees that can not be excluded under the New Zealand and
Australian Consumer Laws. You are entitled to a replacement or refund for a major failure
and for compensation for any other reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality
and the failure does not amount to a major failure.
Getting Started4
Your Rider 310
Getting Started
This section will guide you on the basic preparations before you start using your Rider 310.
Rider 310 is equipped with barometer which shows the real time altitude.
NOTE: To adjust the altitude settings on Rider 310, refer to page 15.
2
3PAGE ( )
In Menu, press to move down to scroll•
through menu options.
In Meter view, press to switch meter•
screen page. Press and hold to enter
Shortcut page.
1BACK ( )
Press to return to the previous page or•
cancel an operation.
When recording, press to pause•
recording. Press it again to stop
recording.
1 3
2LAP/OK ( )
Press and hold to turn the device on/•
•
selection.
In free cycling, press to start recording.•
When recording, press to mark the lap.•
ENGLISH
Getting Started 5
Accessories
The Rider 310 comes with the following accessories:
USB cable
•
Bike mount•
Optional items:
Heart rate belt• Speed sensor
•
Cadence sensor•
Speed/Cadence Dual sensor•
Status Icons
Icon Description Icon Description
Bike Type Heart Rate Sensor Active
1
Bike 1 Cadence Sensor Active
2
Bike 2 Speed Sensor Active
GPS Signal Status Dual Sensor Active
No signal (not xed) Notication
Weak signal Log Record in Progress
Strong signal Recording is paused
Power Status Bluetooth function is enabled
Full battery
/Half battery
Low battery
NOTE: Only the active icons are displayed on the screen.
•Out-front Bike Mount
•Out-front Bike Mount
/- - -
reset
Getting Started6
Step 1: Charge your Rider 310
Connect Rider 310 to a PC to charge the battery for at least 4 hours.
Unplug the device when it is fully charged.
Step 2: Turn On Rider 310
Press and hold to turn on the device.
Step 3: Initial Setup
When turning Rider 3
instructions to complete setup.
1. Select the display language.
2. Read and accept the Safety Agreement.
ENGLISH
Getting Started 7
Step 4: Acquire Satellite Signals
Once the Rider 310 is turned on, it will automatically search for satellite signals. It may take
30 to 60 seconds to acquire signals. Please make sure you acquire the satellite signal for the
The GPS signal icon ( /
• icon appears on the screen.
•
Tunnels Inside rooms,
building, or
underground
Under water High-voltage
wires or
television
towers
Construction
sites and heavy
Step 5: Ride Your Bike with Rider 310
Free ride:•
In meter view, measurement starts and stops automatically in sync with the movement
of the bicycle.
Start an exercise and record your data:•
In meter view, press to start recording, press to pause, press again to stop.
Start a training:•
Select Train from the menu list. Training can be based on time, distance, calories burn, or
the saved workouts.
Reset Rider 310
To reset the Rider 310, long press all three keys ( / / ) at the same time.
Getting Started
8
Share Your Records
Download Bryton Update Tool
Share Your Records
Download Bryton Update Tool
Training9
Train & Test
Bicycling is one of the best types of exercise for your body. It helps you to burn your calories,
310 Training feature, you can
set simple workouts and use the Rider 310 to track your training or workout progress.
1. In the main screen, press to select
Train&Test.
2. Press to enter the Training menu.
08:08 09/09
Cycling
Train & Test
View History
Settings
To Plan
You can set simple workouts by entering your time or distance goals.
The Rider 3
Simple
1. To set a simple workout, select
To Plan > Simple > Warm Up, Work ,
Cooldown.
2. Press /to set your time and press
3. Choose Save and enter the workout name
using the on-screen keyboard.
4. Go for a ride.
Go to Train & Test > My Workouts > View
and choose the save workout. Press
to start training and record log.
6’ 0” 159 ~171
10’ 94 ~111
10’ 94 ~111
Work
Warm Up
Cooldwn
Simple
ENGLISH
Training 10
Using the On-screen Keyboard
Name
Save
001 END
Name
Save
001 A
1. Press / to select the input character.
Select• DEL to erase the data.
2. Press
s / to select END and press
NOTE:
name according to the current date and time.
My Workout
With My Workout feature, you can start your workout using the training plan that you have
saved in To Plan menu.
1. In the Training menu, press to select
My Workout and press .
2. Press to select View and press to
enter its submenu.
Press• to select your desired
training plan and press
Go for a ride.•
Press to start training and record
log.
3. To choose which workouts to delete,
select Delete.
4. To delete all workouts to delete, select
Delete All.
View
Delete
Delete All
My Workout
Altri manuali per rider 310
2
Indice
Altri manuali Bryton Accessori per biciclette
Bryton
Bryton Rider 860 Manuale utente
Bryton
Bryton Rider 60 Manuale utente
Bryton
Bryton Aero 60 Manuale utente
Bryton
Bryton Rider 50 Manuale utente
Bryton
Bryton rider 530 Manuale utente
Bryton
Bryton Rider 420 Manuale utente
Bryton
Bryton Rider 860 Manuale utente
Bryton
Bryton Rider 50 Manuale utente
Bryton
Bryton Rider Manuale utente
Bryton
Bryton Rider 100 Manuale utente
Bryton
Bryton Rider 860 Manuale utente
Bryton
Bryton Amis S430 Manuale utente
Bryton
Bryton Rider 750 Manuale utente
Bryton
Bryton Rider 15 Manuale utente
Bryton
Bryton RIDER 10 Manuale utente
Bryton
Bryton Rider Manuale utente
Bryton
Bryton Rider 50 Manuale utente
Bryton
Bryton Rider 35 Manuale utente
Bryton
Bryton Rider 100 Manuale utente
Bryton
Bryton rider 310 Manuale utente
