2.2 Function List Of The Device
Upload the longitude and latitude information according to the time
interval.
Uploaded data include the ACC on/off status each time
Turn on backup battery, when the vehicle voltage is lower than 5v, the
device upload a alarm to the server
Set the maximum speed limit value on the platform or SMS, when the
GPS speed is more than the value, the device will upload a alarm to the
server
Cut off/supply fuel remotely through server or SMS
The data is stored up to 300pcs. if the terminal is located and not online,
upload this data when the signal is good
When the angle of the vehicle turns is more than a certain angle, the
device will upload a position information to the platform to optimize
the trajectory.
Need assistance of factory
The 3D triaxial acceleration sensor detects vibration status of vehicle in
real time, when the car is moving, the device is in motion mode; the
device will change to static mode after 5 minutes without vibration,
close the GPS module, when vibration is detected, the device
automatically changes to motion mode.
SMS command to get
location
Send “where” through SMS or platform to get latitude and longitude,
current time, speed, direction, current voltage value, ACC status,
Google Maps link
2.3 Installation Process Of Product
2.3.1 Installation
Check Device
Check whether the appearance of the device is good and whether the related accessories are
complete.
Install SIM card
Open the device SIM card into the card slot. Please avoid overexertion is damaged, please
make sure that a SIM card with Internet access, only at the same time satisfy the electricity and
insert SIM card terminal can work normally.
The position requirements of terminal installation
A. Waterproof: choose place which is not easy to fill the position, kept terminal dry, pay
attention to be far away from the air-conditioning outlet in case of the changes of
