BubblyNet T4 Manuale utente

T4 + T 7 TOUCHSCREEN INSTALLATION INSTRUCTIONS

WARNING - RISK OF FIRE AND ELECTRICAL SHOCK. DEVICE MUST BE INSTALLED BY

A QUALIFIED ELECTRICIAN ONLY. DEVICE IS INTENDED FOR INSTALLATION IN

ACCORDANCE WITH THE NATIONAL ELECTRICAL CODE, LOCALAND FEDERAL

SPECIFICATIONS. DISCONNECT POWER AT ELECTRICAL PANEL BEFORE SERVICING.

RETAIN THESE INSTRUCTIONS FOR MAINTENANCE REFERENCE.

CUTOUT TABLE

TOUCHSCREEN CUTOUT

4” SCREEN 4.7” X 3.3”

7” SCREEN 7.2” X 4.725”

BubblyNet, 615 Drew St. Clearwater, FL 33755. • Ph 727.316.5319 • Fx 727.683.9720 • www.bubblynet.com

The manufacturer reserves the right to change or modify the design, dimensions and specifications at any time without notice. The manufacturer accepts

no liability for consequential damage which is occasioned to the user based on the data provided.

TOUCHSCREEN INSTALLATION

1. MAKE A CUT OUT AS PER THE CUTOUT TABLE IN THE WALL USING APPROPRIATE CUTTING

TOOL. CUT OUT CAN BE LANDSCAPE OR POTRAIT MODE. . MAKE SURE TO PULL OUT THE USB-C

THROUGH THE CUT OUT. (FIGURE 1)

2. CONNECT THE USB-C TO THE TOUCH SCREEN. USB-C IS FOR POWER AND NECESSARY FOR

OPERATION.(FIGURE 2)

3. PULL THE SPRINGS BACK ( FIGURE 3)

4. INSERT THE TOUCH SCREEN IN THE WALL. MAKE SURE ALL CABLES ARE INSIDE THE WALL.

(FIGURE 4)

5. FLIP ON THE BREAKER TO THE SCREEN. IT WILL AUTOMATICALLY START THE SET-UP ROUTINE.

(FIGURE 5)

BubblyNet, 615 Drew St. Clearwater, FL 33755. • Ph 727.316.5319 • Fx 727.683.9720 • www.bubblynet.com

The manufacturer reserves the right to change or modify the design, dimensions and specifications at any time without notice. The manufacturer accepts no

liability for consequential damage which is occasioned to the user based on the data provided.

1 2 3

USB-C

WIRING DIAGRAM

BubblyNet, 615 Drew St. Clearwater, FL 33755. • Ph 727.316.5319 • Fx 727.683.9720 • www.bubblynet.com

The manufacturer reserves the right to change or modify the design, dimensions and specifications at any time without notice. The manufacturer accepts no