Disclaimer
Greatest care has been taken to provide accurate and complete information in this manual.
The manufacturer is not liable for errors and missing information.
The manufacturer reserves the right to change and improve functions and specications of the product without notice.
Duplication, transmission of part or all of this manual without consent of the manufacturer is prohibited. All rights reserved.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Euro-CB is under license.
Other trademarks and trade names are those of their respective owners.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its
literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the
environment or human health from uncontrolled waste disposal,please separate this from other types of wastes and recycle it responsibly to
promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government ofce, for details of where and how they can
take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other
commercial wastes for disposal.
To prevent possible hearing damage, do not listen to high volume levels for long periods.
This product has an embedded, non-replaceable battery, do not attempt to open the product or remove the battery as this may cause injury and
damage the product. Please contact the local recycling facility for removal of the battery. The embedded, non-replaceable battery is designed to last
the life time of the product.
Hereby, EURO-C.B. (Phils.),Inc., represented by Michel MARCHANT, CEO, declares that the BUDDY CHAT, is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment
and telecommunications terminal equipment and the mutual recognition of their conformity.
For the whole declaration and liabilities please visit : www.buddychat.ph
Federal Communications Commission (FCC) Statement
Industry Canada (IC) Statement
15.21
You are cautioned that changes or modications not expressly approved by the part responsible for compliance could void the user’s authority to
operate the equipment.
15.105(b)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC/IC rules. These limits
are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures :
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Operation is subject to the following two conditions :
1)This device may not cause interference and
2)This device must accept any interference, including interference that may cause undesired operation of the device.
FCC/IC RF Radiation Exposure Statement :
This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specic operating
instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
We did our best to make this user guide as complete as possible.
Inspite of all our efforts, if you have any problem or question
regarding the BUDDY CHAT, please see
www.buddychat.ph
Feel free to contact us
We will be glad to help you
MSBCHDUOEN v1.0
QUICK GUIDE
DUO
The two devices are already paired from factory and ready to use,
make sure your units are fully charged !
CHARGE:
Connect a micro-USB cable into the device socket.
The LED will turn red while charging.
The LED will turn green once the battery is fully charged.
POWER ON:
Long press to switch ON, then release the button once an ascending tone is heard
and LED is blinking blue.
Upon turning “ON”, devices will connect together automatically after 10 seconds.
ADJUST VOLUME:
Short Press Vol+ / Vol- to increase or decrease the audio volume.
A high or low beep will be heard upon reaching maximum or minimum level.
POWER OFF:
Long press to switch OFF then release the button once a descending tone is heard
and the LED becomes red.
MANUAL CONNECTION:
In case the connection is lost between the three Buddy Chat, it’s possible to connect manually.
Short press , devices will connect together after 10 seconds.
MICROPHONE MUTE:
Long press Vol -until a double tone is heard.
If the microphone is on mute mode, short press any button to unmute.
Volume +
LED
Volume -Power
Micro-USB Socket
for charging or earmuff kit
