Buffalo WLI-UC-GN Manuale utente
www.buffalotech.com 35010856 ver.02 v1.00
User Manual - WLI-UC-GN
Wireless N USB 2.0 Adapter/Router
2
Table of Contents
Introduction .............................................................................3
Full Installation ........................................................................4
Connect to a Wireless Network ..........................................7
Using Client Manager 3 for Windows XP ............................7
Using Client Manager V for Windows Vista ........................8
Alternate Installation (Drivers Only) ........................................ 12
Windows Zero Cong.......................................................13
Using AOSS ............................................................................14
Using WPS with Client Manager 3........................................... 17
Using WPS with Client Manager V...........................................18
Access Point/Router Mode ......................................................20
Connecting Your Nintendo DS® ..............................................22
Connecting Your Nintendo Wii®.............................................. 24
Connecting Your Sony PSP® ...................................................27
Connecting Your Sony Playstation 3® .....................................28
Specications .........................................................................31
Regulatory Compliance Information ........................................32
Logos and Trademarks............................................................44
Contact Information................................................................45
GPL Information .....................................................................47
3
Congratulations on your purchase! The WLI-UC-GN wireless USB Adapter connects your
notebook computer or desktop PC to 2.4 GHz wireless n, g, or b networks. It can also serve as
a router/access point for connecting other wireless devices to your existing network. To install
your WLI-UC-GN with all of the available software, turn to the next page. To install the WLI-UC-
GN with wireless client drivers only, turn to page 12.
Introduction
4
The installation program will install drivers, Client Manager software, a tool to switch between
client and router modes, and software to let the WLI-UC-GN act as an access point for other
wireless devices. If you only want to install wireless drivers, turn to page 12.
Do not insert the USB key into a USB port yet. Insert the WLI-UC-GN Navigator CD into the CD-
ROM drive.
Full Installation
This window will open on your desktop.
Select Begin Installation.
5
Click Install to continue. Step through the wizard to install
your software.
The WLI-UC-GN may be installed as either a wireless client
or a wireless access point.
Choose Client Mode Installation if you want to add a wireless
client to your computer, allowing it to connect to existing
wireless networks.
Choose Access Point Mode Installation if you want to
congure the WLI-UC-GN as a simple wireless access point
for connecting AOSS-compatible devices such as game
consoles.
Note: After installation, you will be easily able to switch
between the two modes.
Installation
6
Installation
During the installation, the wizard will ask you to insert,
remove, and then reinsert the WLI-UG-GN at various times.
Follow the instructions on each screen.
When the wizard is complete, click Finish.
7
Client Manager software lets you connect your computer to a wireless network. Client Manager
3 software is installed on Windows XP computers. If your computer uses Vista, turn to the next
page instead. To open Client Manager 3, click on the icon in the systray.
Click on one of the three buttons up top to navigate to the three different
sections of Client Manager. The Scan tab shows a list of available
wireless networks. Highlight one and click Connect at the bottom to
connect to that network.
The Status tab shows information about your current wireless
connection.
The Proles tab lets you create, store, and prioritize common wireless
connections. The AOSS/WPS button is also located here.
Connect to a Wireless Network: Client Manager 3 for Windows XP
8
Client Manager V will open. Click
on Prole List on the left side of
the window.
Client Manager V for Windows Vista
If your computer uses the Microsoft Vista operating system,
Client Manager V software will have been installed. To use Client
Manager V to connect to your wireless network, click on the
icon in the system tray. In the popup, click Advanced.
In Prole List, click New.
9
Now, click on the Connect Manually button.
The AOSS/WPS button is here. To congure the client
manually, click on the Advanced Setup button.
10
Highlight your network name (SSID) and click Next.
Click on the Search button.
Altri manuali per WLI-UC-GN
1
Indice
Altri manuali Buffalo Adattatore
Buffalo
Buffalo AirStation Dual A&G WLI-CB-AG108HP Manuale utente
Buffalo
Buffalo Buffalo AirStation WLI-USB-G54 Manuale utente
Buffalo
Buffalo Buffalo AirStation WLI-CB-G54HP Manuale utente
Buffalo
Buffalo AirStation WLI-CB-G54S Manuale utente
Buffalo
Buffalo Buffalo AirStation WLI-CB-G54HP Manuale utente
Buffalo
Buffalo WLI-U2-KG54-AI Manuale utente
Buffalo
Buffalo AirStation Manuale utente
Buffalo
Buffalo AirStation WLI-CB-G54S Manuale utente
Buffalo
Buffalo AirStation WLI-USB-KB11 Manuale utente
Buffalo
Buffalo AirStation Dual A&G WLI-CB-AG108HP Manuale utente
Buffalo
Buffalo AirStation WI-U2-433DM Manuale utente
Buffalo
Buffalo AirStation WI-U2-433DM Manuale utente
Buffalo
Buffalo WLI-UC-GNHP Manuale utente
Buffalo
Buffalo Buffalo AirStation WLI-USB-G54 Manuale utente
Buffalo
Buffalo WLI-CB-G54A Manuale utente
Buffalo
Buffalo WLI-U2-AG108HP Manuale utente
Buffalo
Buffalo AirStation Nfiniti WLI-U2-G300N Manuale utente
Buffalo
Buffalo AIRSTATION WLI2-USB2-G54 Manuale utente
Buffalo
Buffalo WLI-U2-AG108HP Manuale utente
Buffalo
Buffalo PL-05H Series Manuale utente
