Buind SmartShift Manuale del proprietario
Fig. 01 SmartShift Base complete
Technical instructions
user's Manual
Original instructions –User
manual
Manufacturer: Buind AS
Machine type: SmartShift
Designation: Base
Manufacturing year:___2019
Machine name: SmartShift Base
Revision: 00
Revisions date: 2019.08.28
Made in Norway Original instructions –User manual
Page 2of 8
1 Introduction
The SmartShift Base clutch designed for manual relocation of the robot arm to various
locations on different footplates. The SmartShift Base designed for all Universal Robot types
and similar robots.
SmartShift Base set consists of two units:
A Base Footplate (BF) and a Robot Base Master (RBM) with locking ring incl. fixation
screw. All types of robots footplate accommodated. Several size variations are therefore
possible.
Machine name: SmartShift Base
Revision: 00
Revisions date: 2019.08.28
Made in Norway Original instructions –User manual
Page 3of 8
Product information:
Machin type: SmartShift Base
Drawing number:xxxx xx
Type designation: xxxxxxx
Manufacturing year: 2019
Manufacturer:
Name:Buind AS
Reference: Kjell Buind
Address: Hensmoveien 17,
3516 Hønefoss
Machine name: SmartShift Base
Revision: 00
Revisions date: 2019.08.28
Made in Norway Original instructions –User manual
Page 4of 8
2 Table of Contents
1INTRODUCTION................................................................................................................2
2TABLE OF CONTENTS.....................................................................................................4
3GENERAL DESCRIPTION ...............................................................................................5
3.1 THE SMARTSHIFT BASE ......................................................................................................... 5
3.2 ROBOT BASE MASTER (RBM) SPECIFICATION ...................................................................... 5
3.3 BASE FOOTPLATE (BF) SPECIFICATION ................................................................................. 5
4SAFETY INSTRUCTIONS.................................................................................................6
4.1 GENERAL SAFETY................................................................................................................... 6
5MOUNTING / USE..............................................................................................................6
5.1 SETUP GUIDE .......................................................................................................................... 6
6MAINTENANCE.................................................................................................................7
6.1 GENERAL................................................................................................................................ 7
6.2 LUBRICATION......................................................................................................................... 7
7EC DECLARATION ...........................................................................................................8
Machine name: SmartShift Base
Revision: 00
Revisions date: 2019.08.28
Made in Norway Original instructions –User manual
Page 5of 8
3 General description
3.1 The SmartShift Base
The SmartShift Base is capable of accurate and exact fixation of a robot to operate between
various workstations locations. The benefit is to fast, easy and accurate move the same robot
in different workstations where exact zero positioning secured each time. The SmartShift
Base consists of following two main units:
A Robot Base Master (RBM) and a Base Footplate (BF).
The Robot Base Master (RBM) can be mounted on all the types of the Universal Robots or
similar equipment. Base Footplate (BF) applies in a number needed for different
workstations. Standard flanges are in stock. Any flange variation depending on special
design can de requested. Se configurator on SmartShift-Robotics webpage.
Detail Overview
A) Robot Base Master (RBM)
B) Base Footplate (BF)
3.2 Robot Base Master (RBM) specification
Recommended for robots handling payload up to: 10 kg
Outer diameter: xxx mm
Flange diameter xxx mm
Total Weight: xxx g
Material: Bright Steel
3.3 Base Footplate (BF) specification
Recommended for robots handling payload up to: 10 kg
Outer diameter: xxx mm
Flange diameter xxx mm
Reference diameter: xxx mm
Total Weight: xxx g
Material: Bright steel
B
A
Machine name: SmartShift Base
Revision: 00
Revisions date: 2019.08.28
Made in Norway Original instructions –User manual
Page 6of 8
4 Safety instructions
4.1 General safety
Keep hands and tools away from all SmartShift components when the program is running.
Follow this manual carefully also regarding maintenance and recommended weight. Always have
security data sheet for recommended lubrication available.
If the SmartShift base is damaged, then stop using immediately and contact Buind for replacement
parts. Buind is not responsible for damage to people and property caused by using damaged
components.
5 Mounting / use
Mount Robot Base Master (RBM) directly onto the Universal Robot arm or on similar equipment.
Mount the Base Footplate at the workstation by securing the bolts for safely. The application robot
recommended handling weight is max. 10 kg. The owner is fully responsible for mounting the
SmartShift clutch securely.
5.1 Setup guide
Erect the Base Footplate (BF) on the workstation and secure it safely by usage of suitable bolts and
corresponding nuts.
Erect the Robot Base Master on the robotic footplate and secure it safely by usage of suitable bolts
and nuts.
Now the two corresponding parts slides together by manual lifting the robot arm in line with the
Base Footplate.
After safely sliding the two parts together then turn the locking ring, 180 degrees and lock the ring
position with the fixation screw.
Machine name: SmartShift Base
Revision: 00
Revisions date: 2019.08.28
Made in Norway Original instructions –User manual
Page 7of 8
6 Maintenance
6.1 General
Make sure to keep SmartShift Base in a clean environment. If chips or other big particles comes
between the Robot Base Master (RBM) and the Base Footplate (BF) the accurate zeroing of the
robot is jeopardized and the lifetime of the SmartShift Base can thus be shortened.
6.2 Lubrication
Once every second week, put a few drops of silicon-based lubricant (silicone spray) on each
surface to keep the components sliding easily against each other, and a few drops on the locking
ring keep it sliding easily. Recommended silicone spray is WD-40 (300014) silicone oil, or
equivalent silicone-based lubricant.
Silicon Lubricant
Machine name: SmartShift Base
Revision: 00
Revisions date: 2019.08.28
Made in Norway Original instructions –User manual
Page 8of 8
7 EC Declaration
Altri manuali per SmartShift
1
Indice
Altri manuali Buind Robotica
