Bunker Hill Security 69654 Istruzioni per il montaggio
Page 2 For technical questions, please call 1-800-444-3353. SKU 69654
WARNING SYMBOLS AND DEFINITIONS
This is the safety alert symbol. It is used to alert you to
potential personal injury hazards. Obey all safety messages
that follow this symbol to avoid possible injury or death.
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
Addresses practices not related to personal injury.
Important Safety Information
Read all safety warnings and instructions.
Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
Installation Safety
1. Keep children and bystanders away
while installing a camera. Distractions
can cause you to lose control.
2. Do not overreach when installing
this product. Keep proper footing
and balance at all times. This enables
better control in unexpected situations.
3. Wear ANSI-approved safety
goggles during installation.
4. This product is not a toy. Mount
it out of reach of children.
Page 3For technical questions, please call 1-800-444-3353.SKU 69654
Operation Safety
1. Do not operate electrically powered
products in explosive atmospheres,
such as in the presence of flammable
liquids, gases, or dust. Electrically
powered products create sparks
which may ignite the dust or fumes.
2. The adapter must match the outlet.
Never modify the plug in any way.
Unmodified plugs and matching outlets
will reduce risk of electric shock.
3. Do not expose the Power Adapter of
this product to rain or wet conditions.
Water entering the Power Adapter will
increase the risk of electric shock.
4. Do not abuse the Power Cord. Never
use the cord for unplugging the plug
from the outlet. Keep cord away
from heat, oil, sharp edges or moving
parts. Damaged or entangled cords
increase the risk of electric shock.
5. WARNING: Handling the cord
on this product will expose you
to lead, a chemical known to
the State of California to cause
cancer, and birth defects or other
reproductive harm. Wash hands
after handling. (California Health &
Safety Code § 25249.5, et seq.)
6. The warnings, precautions, and
instructions discussed in this instruction
manual cannot cover all possible
conditions and situations that may
occur. It must be understood by the
operator that common sense and
caution are factors which cannot
be built into this product, but must
be supplied by the operator.
Service Safety
1. Product service must be performed
only by a qualified technician.
2. When servicing a product, use
only identical replacement parts.
3. Maintain this product with care.
Keep this product clean. Do not use
a damaged product. Tag damaged
products “Do not use” until repaired.
4. Disconnect the Power Adapter
from the power source before
making any adjustments, changing
accessories, or storing this product.
Such preventive safety measures
reduce the risk of electric shock.
5. Maintain labels and nameplates on
the camera. These carry important
safety information. If unreadable
or missing, contact Harbor Freight
Tools for a replacement.
SAVE THESE INSTRUCTIONS.
Page 4 For technical questions, please call 1-800-444-3353. SKU 69654
Grounding
TO PREVENT ELECTRIC SHOCK AND DEATH FROM
INCORRECT GROUNDING WIRE CONNECTION:
Check with a qualified electrician if you are in doubt as to whether the
outlet is properly grounded. Do not modify the power cord plug provided
with the camera. Never remove the grounding prong from the plug. Do not use the
camera if the power cord or plug is damaged. If damaged, have it repaired by a
service facility before use. If the plug will not fit the outlet, have a proper outlet
installed by a qualified electrician.
Figure A: Outlets for 2-Prong Plug
1. The included adapter does
not require grounding.
2. The adapter may be used in either
of the 120 volt outlets shown in the
preceding illustration. (See Figure A.)
Extension Cords
Note: Do not use an extension
cord with this item’s adapter.
Symbology
Double Insulated
Canadian Standards
Association
Underwriters Laboratories, Inc.
V~ Volts Alternating Current
AAmperes
Specifications
Power Adapter 120 V~ / 60 Hz Input
12 VDC / 200 mA Output
Resolution 300 x 380 TV lines
Cable 80 feet
Angle 40º down, 20º up,
360º side to side
Night Vision Type Infrared LED’s with
Low Light Sensor
Image Type Daylight: Color
Infrared: Black & White
Operating Temperature 14º to 122º F
Page 5For technical questions, please call 1-800-444-3353.SKU 69654
Installation Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section
at the beginning of this manual including all text under
subheadings therein before set up or use of this product.
TO PREVENT SERIOUS INJURY FROM ELECTRIC SHOCK:
Unplug the Power Adapter from its electrical outlet before installation.
Components
Figure B
Camera (1)
Camera
Phone
Jack
Power
Adapter (2) Cable (3)
Modular
Jack (4)
Cable
Phone
Jack
Yellow
Video Plug
White
Audio Plug
Adapter
Jack
Adapter
Connector
Drywall
Anchors
Mounting
Screws
Before Mounting
1. Before mounting the Security Camera,
test the camera by connecting all
the cables and making sure that the
unit functions properly as described
in the following Set Up section.
2. When planning the mounting
location and angle of the Camera,
consider the following:
a. Do not mount the Camera in
bright or direct sunlight.
b. At night windows can reflect back
into the Camera, interfering with
the image. Test the Camera in the
intended location before mounting.
c. Choose a location high enough so
that it is out of reach of children
and others who might tamper
with the unit, but still covers the
desired viewing area adequately.
d. Take into consideration the
length of the cable and the need
to place the Modular Jack (4)
in a safe, dry location.
Do not expose the modular Jack
to weather. Route the cord so
as to avoid a tripping hazard.
Rev 07i, 09e, 10a, 10l
Page 6 For technical questions, please call 1-800-444-3353. SKU 69654
Mounting
The Security Camera can be mounted with the Camera Base, so
that its position is adjustable, or the base can be removed and the
Camera can be mounted in a stationary position. If the camera is to be
mounted outdoors, do not use the adhesive pad for attachment.
Mounting the Camera with the Base
1.
Figure C
Camera (1)
Camera Base
Screwdriver
Adjust the Camera to the desired angle:
a. Insert a Phillips head screwdriver
(sold separately) into the center of the
Camera base and loosen the bolt.
b. Adjust the angle of the Camera,
then tighten the bolt.
2.
Figure D Camera Base
Screw
Screwdriver
Mount the Camera to the
chosen location, using the three
included bolts through the three
holes in the Camera Base.
WARNING! Check for hidden
wiring before securing.
Note: The adhesive pad can be used
instead of the screws for indoor locations.
Do not use adhesive pad to mount
outdoors, it is not weatherproof.
Mounting the Camera without the Base
1. Using a Phillips head screwdriver
(sold separately), unthread the two
screws that hold the Camera Base in
place and remove the Camera Base.
Store in a dry safe place.
2. Use the holes on the back of the
Camera to secure the unit in place.
Note the angle of the holes
when planning any drilling.
Page 7For technical questions, please call 1-800-444-3353.SKU 69654
Cable Connection
1. Use the Modular Jack (4) to
connect the Camera Phone Jack
to the Cable Phone Jack.
2. Insert the Yellow Plug of the Cable (3)
into the television’s Video Input Port
(television/monitor sold separately).
3. Insert the White Plug of the Cable (3)
into the television’s Audio Input Port.
4. Insert the Power Adapter’s (2) plug
into the black Power Connector
of the Cable (3).
5. Then, plug the Power Adapter (2)
into the nearest 120 volt,
grounded, electrical outlet.
CAUTION! The Power Adapter MUST
be used indoors in a clean, dry location.
Figure E TELEVISION
(NOT INCLUDED) POWER ADAPTER (2)
CABLE (3)
MODULAR JACK (4)
Page 8 For technical questions, please call 1-800-444-3353. SKU 69654
Operating Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section
at the beginning of this manual including all text under
subheadings therein before set up or use of this product.
1. Turn on the television and set to
video/AV mode. The camera’s view
should appear on the screen.
2. The Camera will operate continuously
(day and night) while the
Power Adapter (2) is plugged in.
3. When not using the Camera,
unplug the Power Adapter (2)
from the electrical outlet.
Page 9For technical questions, please call 1-800-444-3353.SKU 69654
Inspection, Maintenance, and Cleaning
Procedures not specifically explained in this manual must
be performed only by a qualified technician.
TO PREVENT SERIOUS INJURY FROM ELECTRIC SHOCK:
Unplug the Power Adapter from its electrical outlet
before inspection, maintenance, or cleaning.
1. BEFORE EACH USE, inspect the
general condition of the Camera.
Check for loose screws, misalignment
or binding of moving parts, cracked
or broken parts, damaged electrical
wiring, and any other condition
that may affect its safe operation.
If a problem occurs, have the problem
corrected before further use.
Do not use damaged equipment.
2. WEEKLY: Wipe off Camera Lens with
a soft, clean, moist cloth. Then dry.
Troubleshooting
Problem Possible Causes Probable Solutions
Camera does not work. 1. No power at outlet.
2. Cables not properly
connected.
1. Check power at outlet.
2. Check that all cables are
securely connected.
Poor image quality. Camera lens is dirty. Clean Camera lens.
View undesirable. Camera out of adjustment. Adjust Camera up, down, left, and
right to obtain desired view.
Image on the television
is upside down.
Camera not mounted correctly. Reposition camera mount to mounting holes
at the top rear of the camera (see page 8).
Page 10 For technical questions, please call 1-800-444-3353. SKU 69654
Parts List and Diagram
Part Description Qty
1 Camera 1
2Power Adapter 1
3 Cable 1
4 Modular Jack 1
1
2
3
4
Record Product’s Serial Number Here:
Note: If product has no serial number, record month and year of purchase instead.
Note: Some parts are listed and shown for illustration purposes only,
and are not available individually as replacement parts.
Indice
Altri manuali Bunker Hill Security Telecamera di sicurezza
Bunker Hill Security
Bunker Hill Security 61208 Istruzioni per il montaggio
Bunker Hill Security
Bunker Hill Security 61805 Istruzioni per il montaggio
Bunker Hill Security
Bunker Hill Security 61208 Manuale utente
Bunker Hill Security
Bunker Hill Security 62367 Manuale utente
Bunker Hill Security
Bunker Hill Security 95153 Manuale
Bunker Hill Security
Bunker Hill Security 95154 Istruzioni per il montaggio
Bunker Hill Security
Bunker Hill Security 95914 Istruzioni per il montaggio
Bunker Hill Security
Bunker Hill Security 95914 Manuale di installazione
Bunker Hill Security
Bunker Hill Security 95154 Manuale utente
