Bushnell Equinox 260330 Manuale utente

INSTRUCTION MANUAL Model #: 260330

03-13

3x30

Digital

Night VisioN

MoNocular

ENGLISH 412

FRANÇAIS 1321

ESPAÑOL 2230

DEUTSCH 3139

ITALIANO 4048

PORTUGUÊS 4957

PARTS AND CONTROLS GUIDE

Tripod Socket

ABOUT BUSHNELL®EQUINOX™DIGITAL NIGHT VISION

Congratulations on the purchase of your Bushnell® Equinox™ Digital Night Vision. Comprised of high quality

electronics and optics, the Bushnell Equinox is a hand-held digital night vision viewing system that utilizes a low-light

charge-coupled device (CCD) sensor, providing edge-to-edge resolution and image quality equal to or exceeding

"Gen 2" analog units, at any range. Fully multi-coated optics increase light transmission and decrease glare. The

LCD micro display screen features user-selectable monochrome or "traditional" green viewing modes. The Equinox

models are 20% more energy efficient than other digital night vision units, resulting in a battery life of over 6 hours

(without IR). The Equinox 3x30 Digital Night Vision monocular is versatile enough for many applications including

hunting, camping, boating/fishing, caving, paintball, stargazing, rescue/recovery, security surveillance, and law

enforcement- in continuously changing light conditions – from dawn to absolute darkness. The Equinox 3x30 model

has a 46 foot field of view at an observation distance of 100 yards (14 meters at 100 meters), ideal for viewing moving

objects. A built-in accessory mounting rail (5) enables the user to attach the Bushnell I-Beam IR Flashlight (#267100)

or other compatible accessories.

HOW DIGITAL NIGHT VISION WORKS

Bushnell Digital Night Vision products collect existing light through the objective lens. The image is then processed

through a 1/3” near infra-red sensitive CCD sensor module and transferred to the micro liquid crystal display (LCD).

Images viewed on the LCD are magnified 3 times. Equinox Digital Night Vision models are equipped with a built-

in powerful IR (infrared) illuminator (10) that enables clear viewing in low ambient light conditions or even total

darkness.

ENGLISH

BATTERY INSTALLATION

1. Open the battery compartment (9) by unscrewing and removing the battery cap (counter-clockwise).

2. Install two CR123 lithium batteries, inserted with the negative (flat) ends facing up towards the spring on the

removable cap.

3. Replace the battery compartment cap and secure it by turning it clockwise until tight.

NOTE: Do not mix old and new batteries together. Replace both batteries at the same time. Do not mix battery types.

POWER ON

Remove the protective objective lens cover (7) from the objective lens (6). Press the ON button (1) until the green

LED indicator (L1) turns on. The LCD screen inside the eyepiece (8) will power on.

FOCUSING

Point the Equinox night vision unit at the object you wish to observe, holding it horizontally with the ON button

and Bushnell logo facing up. To focus, first rotate the diopter setting ring of the eyepiece (8) until the edges of the

rectangular LCD screen appear as sharp as possible to your eye. Then rotate the objective lens focusing collar (6)

until the observed image is sharp. To focus on another object at a different distance, you will only need to adjust the

objective lens focusing collar (6), as the diopter setting is already optimized for your individual eyesight. You may

need to readjust the diopter setting the next time you use the Equinox unit or if the eyepiece is moved accidently.

POWER OFF

To turn the unit off, press the ON button (1) again. The green LED indicator (L1) will turn off. Replace the protective

objective lens cap cover (7) before storing or transporting the unit.

USING THE IR ILLUMINATOR

When using the unit under conditions of total darkness, turn on the IR illuminator (10) by pressing the IR button (2).

When the IR illuminator is on, the red LED indicator (L2) will turn on.

NOTE: The IR light source is invisible to the unaided eye, but can be seen by other people equipped with night vision

devices (be aware of this if using the unit for surveillance or law enforcement applications).

To turn the IR illuminator off, press the IR button (2). The red LED indicator (L2) turns off. (Note that the IR illuminator

does not cut off instantly, it will "fade out"). The IR illuminator will also turn off when the unit's power is turned off by

pressing and holding the ON button (1).

ADJUSTING THE LCD DISPLAY BRIGHTNESS

To increase and decrease LCD screen brightness, rotate the LCD brightness knob (3) until the desired level of

brightness is achieved to allow a comfortable viewing experience (clockwise rotation increases brightness).

NOTE: When the unit is turned on again, the LCD screen brightness setting will be at the same level as previously set.

SWITCHING THE LCD DISPLAY COLOR

To switch the LCD screen color from green to white or from white to green, quickly press the LCD backlight color

mode button (4).

LOW BATTERY INDICATOR

The green LED (L1) starts flashing when the battery power is less than approximately 15% of full capacity. Replace

both batteries as directed in "Battery Installation".

TROUBLESHOOTING

Unit does not turn on

1. Reinstall the batteries, making sure of the correct polarity (+/- terminals) orientation.

2. Replace both batteries.

3. Clean the battery compartment, especially the contact points.

Observed image is too bright

The ambient light level is too high (e.g. observation during bright sun conditions).

1. Turn off the unit or place the objective lens cover (7) over the lens. The unit will function normally in light

conditions below 25,000 Lx (day light).

2. Adjust the LCD screen brightness (see "Adjusting the LCD Display Brightness" in this instruction manual).

Image is missing or not focused

1. Re-focus by adjusting the objective lens (6). Adjust the diopter setting if necessary by rotating the eyepiece

(8) until the edges of the LCD display appear sharp (see "Focusing" in this instruction manual).

2. Check the condition of the objective lens (6) surface and eyepiece (8) and clean if necessary.

3. Replace the batteries.

4. In extreme low light conditions, activate the built-in IR illuminator (10).

Image disappears or its quality is reduced

Bright light sources (e. g. street lights at night time) may cause decreased visibility or reduced contrast.

1. Turn the monocular away from the light source; visibility will return momentarily.

2. Readjust the LCD display brightness setting.

Small black dots are visible on the screen

Small dots are normal, minor cosmetic blemishes resulting from the LCD manufacturing process and are not a

defect or quality control error. These dots do not interfere with the reliability and performance of the monocular.

CARE AND MAINTENANCE

Your Bushnell Equinox Digital Night Vision device was designed to provide many years of reliable service. To ensure

that you get the most enjoyment out of your Digital Night Vision device, always obey the following warnings and

precautions.

• Keep the device away from any heating and air conditioning vents or other heating devices, direct sunlight, and

moisture.

• Always store the unit in its carrying case in a dry well ventilated space in temperature above +15°C (60° F). Do

not store near heating devices. Do not store in direct sunlight or high humidity conditions (higher than 70 %).

• Clean the optical lens with camera lens cleaning supplies.

• Clean the exterior of the device with a soft clean cloth.

• Remove the batteries if the device will not be used for longer than a few weeks.

WARNING AND PRECAUTIONS

• Avoid dropping or otherwise shocking the unit. Although designed for rugged outdoor use, this device

incorporates sophisticated digital circuitry which could be damaged in extreme cases of misuse.

• Do not open the body of the device or otherwise attempt to service this device.

• Never pour alcohol or any other liquids directly onto the lens surfaces.

• Do not clean lenses and unit surfaces with paper based products, such as newspaper, textbook paper, etc. as it

can damage the coating.

• Avoid removing the eyepiece as the LCD display could become damaged.

• Do not leave the device in direct sunlight or rain. The unit is water resistant, but is not designed for prolonged

exposure to moisture and cannot be submerged in water.

• After the unit is operated in temperatures below zero, wait at least 3 hours at room temperature, to avoid

condensation accumulating on the internal lens surfaces and the consequent fogging caused by extreme

temperature differences.

Specication 260330

Magnication 3x

Objective Size 30mm

Battery Type (2) CR-123 Lithium

Viewing Range 656 ft / 200 m

Field of View @ 100 yds/m 46 ft / 14m

Operating Temperature Range +14 ~+113 F / -10 ~ +45 C

Dimensions (H x W x L) 53 x 82 x 140 mm

Weight (w/o batteries) 7.4 oz / 210 g

Tripod Mountable Yes

Water Resistance Standard IPX4

Note: failure to follow the warnings and precautions as stated in this

manual may damage the unit and void the manufacturer’s warranty.

Indice

Lingue:

Altri manuali Bushnell Monoculare

Bushnell

Bushnell 26-0300 Manuale utente

Bushnell

Bushnell 26-0200 Manuale utente

Bushnell

Bushnell Night Vision 26-2024 Manuale utente

Bushnell

Bushnell 26-4202 Manuale utente

Bushnell

Bushnell 191144 Manuale utente

Bushnell

Bushnell ImageView 11-8000 Manuale utente

Bushnell

Bushnell 180825 Manuale utente

Bushnell

Bushnell EQUINOX X650 Manuale utente

Bushnell

Bushnell Night Vision 26-0100 Manuale utente

Bushnell

Bushnell Night Vision 26-2042W Manuale utente

Bushnell

Bushnell Equinox 260228 Manuale utente

Bushnell

Bushnell Night Vision 26-0100 Manuale utente

Bushnell

Bushnell Night Vision 26-0100 Manuale utente

Bushnell

Bushnell Equinox Z 260130 Manuale utente

Bushnell

Bushnell 26-2013 Manuale utente

Bushnell

Bushnell 26-0300 Manuale utente

Bushnell

Bushnell Imageview Spotting Scope Manuale utente

Bushnell

Bushnell Night Vision 26-2042 Manuale utente

Bushnell

Bushnell Legend Ultra HD Manuale utente

Bushnell

Bushnell AR142BK Manuale utente

Bushnell

Bushnell NIGHT VISION 26-2429 Manuale utente

Bushnell

Bushnell Night Vision 260224 Manuale utente

Bushnell

Bushnell Night Vision 26-0224W Manuale utente

Bushnell

Bushnell 260332 Manuale utente

Manuali Monoculare popolari di altre marche

Zeiss

Zeiss Victory 8 x 26 T* PRF Manuale utente

ATN

ATN PS14-3A Manuale utente

Pulsar

Pulsar 71011 Manuale utente

PHOTONIS

PHOTONIS TacFusion Manuale utente

Opticron

Opticron Imagic IS Guida all'installazione

Night Vision

Night Vision NOXM50 Manuale utente

ATN

ATN Night Vision Spotting Scope Night Storm-HPT Manuale utente

ATN

ATN Night vision Monocular MO-4 Manuale utente

Leica

Leica Monovid 8x20 Manuale utente

StellaX

StellaX ZoomX X-003 Manuale utente

AGM

AGM ASP-MICRO TM160i Manuale utente

Zeiss

Zeiss DTI 6/20 Manuale utente

Dali

Dali S25 Series Manuale utente

Zhumell

Zhumell WATERPROOF ZOOM MONOCULAR 10-25X42 Manuale utente

Levenhuk

Levenhuk Fatum Z1000 Manuale utente

ATN

ATN 8x20 Silver Eye Manuale utente

Vortex

Vortex Solo 36 mm Manuale utente

Night Owl

Night Owl Night Scope NOXM50-DG Manuale utente