Bushranger L2501 Manuale utente

OPERATOR'S MANUAL

B;trEl EAUIPilEIIT

STRAIGHT SHAFT TRIMMER

125 tt ir

THE BRAND LEGENDS ARE MADE OF

IMPORTANT NOTES

Thankyouforpur::as -=::- :-,- .-:' ' ' '" --'- - --'-

ThisinstructiottT.ldti..:i,,,::--:::,:-: :: -:: 'j-t-alntenance0fyourTrimmer.Pleasereadthefollowing

warningstoensuresafe:,a-::-- --; -.-- -- - :"-

Safety Markings and SYmbols

Warning!

Read the directions for use

before operating the machine.

Wear safety goggles, a helmet

and ear protection,

Protect the machine

from rain and damP conditions.

Be careful of objects

being thrown out!

Wear sturdy, non-sliP footwear. S

wearsafetygroves. af:ffie

6.''*-+

l*tA

Always switch off the machine

and pull off the sPark Plug

boot.

Read the direction before

carrying out anY maintenance

work.

Do not use rigid cutting disk.

Do not use solid saw edged

All bystanders must be kePt at

least 15 m from the machine.

Tool continues to run some

seconds after switching off.

CAUTI0N: Hot machine Parts.

Keep your distance.

. Read the instructions carefully. Ensure you are familrar ,', l- a :: .': s i :a;e:y precautions outlined in this document

before operating the machine.

. Stayalertandwatchwhatyouaredoingwhenoperatingtl.-.:--= l:rotoperatethetrimmerundertheinfluence

of alcohol, drugs or medication or when you are tired or sicx

. Operatethetrimmeratreasonablehoursonly-notearlyrr:-:-t'-^rcr'ateatnightorwhenpeoplemightbedisturbed

Check with your local council for operation times.

. Do not operate the trimmer indoors or in confined spaces.

. While the trimmer is running, always keep hands and feet a:,?, '':-:^e trimmer head'

(Keep away from any bystanders or animals when in use

. Use only manufacturer's genuine recommended replacement ia:s a^ j accessories.

C F CONTENTS

Safety lnstructions

Hazards

Personal Safety Equipment

04-06

Handle

Guard Assembly

Tnmmer Line Assembly

Fitting Trimmer Head

09 - 10

Opera" -; - : *- '

Oil Fill Procedures 12

Fuelling Procedures 13

Starting i Stopping lnstuctions 14 - 16

Cutting Techniques 17

Maint=-:-:: i -.'. 0ir

Arr Fllter

Spark Plug

Storage

Maintenance Chart

Troubleshooting

,'!. :. ,,

Troublesho: . - ;

Warran['

._i

Asse - :

SAFETY & HANDLING

Safe| lnstructions

Do not operate the Trimmer before reading all lnstructions & reading all

Safety & Handling sections.

0perator SafetY

. Wear the necessary safety equipment, as listed on page (6), in the Personal Safety Equipment Section'

o Always wear heavy, long pants. Do not wear loose clothing, jewellery, short pants, sandals or go barefoot' secure hair

so it is above shoulder length.

. Do not operate the unit if you are tired, ill or under the influence of alcohol, drugs or medication'

Unit SafeU

. The product is intended for garden maintenance trimming of organic ground covering such as grass and lawn' The

product must not be used foi or modified for uses other than is intended, unless approved by the manufacturer.

. lnspect the entire unit and cutting head before each use'

. Ensure that the guard is properly attached.

. Do not use the unit if it is running erratically. Have it serviced promptly.

. KeoP handles free of oil and fuel.

. Learn how to stop the engine quickly in an emergency'

. Stop the engine when the unit is unattended. Never leave engine running while unattended'

. Never allow children or unauthorised persons to operate the unit.

o Do not leave the unit on dry cuttings when it is Hot, as a risk of fire is present. Do not cover muffler or restrict airflow to

muffler.

Fuel Safety

. use a container approved for fuel and a funnel to avoid spillage.

. Pour fuel outdoors where there are no sparks or flames.

. Frequently check for fuel leaks.

. D0 not smoke or allow smoking near fuel, or near the unit, or while using the unit'

. Add fuel before starting the unit'

. Never remove the fuel tank cap while the engine is running or hot, allow to cool before refuelling'

. Never allow the unit to run out of fuel before refuelling.

& HANDLING

o l-.-.: -- : ' :' :- ' - :-: -::'?.: ln rS clear of sticks S:CfI:S l aSS la'S ',r,,rre String and debris, which could

CuttinE S;'i:,

. -::-- : : .- -:--.-:,---aar eweathefConditiOns

Ke=: -- -:- :-*.: :' - :,:::-lersoutsidethe l5 metre hazard zone.Stoptheengineimmediatelyif approached.

aKeep the engirrc b fie rqm of your body, holding the unit with both hands

Keep a firm footing ed balance. Do not over reach.

Keep the cutting head below waist level and do not raise the engine above your shoulder. The cutting head can come

dangerously dme to your body.

Keep vo,' :::, :,', :. ":T the cutting head and muffler when the unit is running

Do not sfike objects that may cause harm or damage to the unit

Maintenane Safety

. Stop fie engine and disconnect the spark plug before clearing blockages, checking or working on the unit. Clean

carbon from ffie muffler at exhaust outlet frequently.

Sicor^:i^l^=:sconnectthesparkplugandinspecttheunitif itbeginstovibrateabnormallyorif itstrikesaforeign

^ ! ^ ^-

uir i_-

Use only genuine trimmer line. Never use wire, rope, string, etc

Use mly genuine replacement parts.

ffi

15 metres -t

-l

SAFETY & HANDLING

Transporting and Storagi

. Hand cariy the unit with the engine stopped and fie muffler away from your body.

Allow the engine to cool, empty the fuel tank and secure the unit before storing or transporting in a vehicle.

Empty the fuel tank after each use and before storing the unit.

store the unit and fuel well away from sparks or open flames from water heaters, electric motors, switches or furnaces,

etc.

. Store the unit out of reach of children and unauthorised persons.

Hazards

The following safety precautions must be strictly observed to avoid the risk of damage or personal injury

prior to using the unit, clear the operating area of obiects which may be thrown up by

the cutting head, such as rocks, glass and other debris.

Do not start or operate the unit inside a closed room or building.

Breathing exhaust fumes can kill.

Be carefutwhen operating the unit on slippery ground or overgrown terrain. Be

attentive for concealed hazards, Such as ditches, tree stumps and roots.

Maintain solid footing and batance while operating the unit. Cut only on ground level.

Never use the unit without the guard securely in place.

Do not touch the cutting head in motion, for assembly or maintenance tasks, always

wear protective gloves.

Bystanders must be at least 15 metres away during operation of the unit, as rocks and

other materials may be thrown at high vetocities. Switch the unit off immediately if

approached.

Keep body away from hot muffler parts.

Personal SafeU EquiPment

Always use the following safety equipment when working with your trimmer:

. A safety helmet fitted with a visor or suitable eye protection'

. A set of ear muffs.

. A pair of protective gloves

A pair of safety boots.

@@@

FEATURES & DEFINITIONS

415 13

'17 18

ASSEMBLY PROCEDURES

3Insert screws (3) ano washers through roop handre and into threads of the cramp

4. Iighten screws to lock handle into position.

cAUTr1N! Not too roose or too tight. hver tightening may damage the unit.

Guard Assembty

Fitting The Straight Shaft Guard

1' Position the guard (3) by rining up the mounting hores on guard mount (2)

2. Secure the guard with two screws (.1).

Fig.2

Handle Assembty

Fitting The Handte

Components - 2x Screws, Loop Handle & Clamp.

1. Place Handle (1) over the shaft in the desired location.

2. lnsert Ctamp (2) fromthe bottom side of the handte.

Fig. I

ASSEMBLY PROCEDURES

Tim='r'- -; I_;55-1t., - BUmp Head

t, i -r, of Scoo

S-snoor

Q*,,,

'-- Housing

Fig. 7Fig.8

Trimmer Line Assembly - Bump Head

Fitting The Handle

1. Press two cover 3 !s ,-,', a.ds on the housing & remove the cover slowly (Fig. 3).

Note: Betain the spring within the housing.

2, Remove the remains of y/orn line from the spool (if any remains).

Note: Remaining line may be sufficient to rewind and reuse if has been tangled or has retracted back into the housing.

Note: Ensure inside of housing and spool are clean and free of grass & soit before refitting.

3. Use 4 meters of diameter 2,4mm nylon line*. Fold the full length of line in the center and insert the centre fold into one

of the slots in the spool middte ptate (Fig. 5).

4. Wind the upper half of the tine tighfly CLOCKWISE onto the upper spoot.

Note:' CL0CKWISE ' direction when looking at the top of the spool as shown by the arrow in Fig. 6.

Continue winding until approximately 1Ocm remains atthe end of the line and hold line end by locking into one of the four

notches on the top of the spool,

Repeat process with other half of the line winding inlhe SAME D|RECTIIN onthe lower spool and hold the line end in an

opposite notch.

5' Put the spool back into the cover. Remove one end of the line from the spool notch & push it into an Eyelet slot. Repeat

for the other end of the line into the opposing Eyelet slot. Pull both ends of line tightly through the eyelets to remove any

excess slack in spool winding (Fig. 7).

6. Push the spool and cover back into the housing so that the housing clips align with the cover and clicks back into place

(Fis. B).

{"nh*

Upper Spool

"= Plate

OPERATING INSTRUCTIONS

Betore Starting

Check the machine for the following each time before use:

o That there are no leaks in the fuel system.

That the cutting unit and all safety devices are in perfect condition

That all screws are securely fastened

Check the position & operation of controls to ensure you are comfortabte before you start using

the machine. Triggers, starter cord and grip position shoutd provide smooth opeiation, balanci

and comfort before stafiing the machine. Check that all screws are securely fastened and also

check allthe safety devices.

. That engine oil is sufficient.

0it

Recommended Oil - SAE 10W30

A Product is supptied without oit. To avoid damage and engine failure, filt with correct oit grade

./ I \ and amount before use as specified below.

Before using the product for the first time, add

B0 mL of high quatity SAE I0W30 oit of Apt ctassification,

SF or higher.

Do not fill beyond upper indicator on oil gauge;

To add oil;

'1. Place Trimmer on flat, even ground so oil doesn,t spill

when full (Fig. 13).

2. Locate the oil dipstick and remove (Fig. t 2)

3. Fill oil bottle with 80mL of oit.

4. Use the bottle to fitt engine (Fig. t 3).

5 Replace dipstick.

High OilLevel

Fig.12

Fig.13

Low Oil Level

Indice

Altri manuali Bushranger Tagliabordi

Bushranger

Bushranger HTS261 Manuale del proprietario

Bushranger

Bushranger HT2600 Manuale utente

Bushranger

Bushranger 85003 Manuale utente

Bushranger

Bushranger MT2601 Manuale utente

Bushranger

Bushranger B2301 Manuale utente

Bushranger

Bushranger HT231 Manuale del proprietario

Bushranger

Bushranger AHT261 Manuale del proprietario

Bushranger

Bushranger HT241 Manuale del proprietario

Bushranger

Bushranger L2601 Manuale utente

Bushranger

Bushranger HT2601 Manuale utente

Bushranger

Bushranger MCH252 Manuale del proprietario

Bushranger

Bushranger BRU36v9301 Manuale utente

Bushranger

Bushranger BRU36v9101 Manuale utente

Bushranger

Bushranger MC-PX-2 Manuale del proprietario

Bushranger

Bushranger B2600 Manuale utente

Bushranger

Bushranger 36V Battery powered Hedge Trimmer Manuale utente

Manuali Tagliabordi popolari di altre marche

MTD

MTD HT 51 E Manuale utente

McCulloch

McCulloch T22 LS Manuale utente

COCKRAFT

COCKRAFT PRO HL36-S Manuale utente

Grizzly

Grizzly CT 1800 Li Manuale utente

Peco

Peco Z Trimmer ZT-3000 Manuale utente

Solo

Solo 116 Manuale utente

Stiga

Stiga ST 1200 Manuale utente

Echo

Echo GT-225 - 10-09 Manuale utente

RedMax

RedMax BT17 Manuale utente

GreenWorks

GreenWorks STA806 Manuale utente

Parkside

Parkside PHSL 900 A3 Manuale utente

Gardeo

Gardeo PRO GPTHT2560 Manuale utente

Park

Park DT-810870 Manuale utente

Worx

Worx WG209 Manuale utente

Gardenline

Gardenline 43671/HTKS26 Manuale utente

Makita

Makita 3710 Manuale utente

Champion

Champion 100683 Manuale utente

Stihl

Stihl FS 311 Manuale utente