Quick Start Guide
SK-DVR-DIY-CVI
Lifetime Tech Support | 1 Year US-Based Warranty
1-866-514-8998
9am-5pm CST, Monday-Friday
Support@poedepot.com
DIY Kits Setup Instuctions
**Total 4 boxes: DVR box*1, Camera box*2,
Accessories box*1 (at the bottom)
1. Connect each camera to the 65ft power and video cables.
2. Connect the 1-to-4 power splitter to the power adapter (in the
accessories box). **NOTE: Accessories box is under all other boxes.
3. Plug the video (yellow) connector to the DVR, and plug the power
(red) connector to the 1-to-4 power splitter.
4. Plug the power adapter (in the DVR box) to the DVR.
5. Connect DVR with monitor by using VGA or HDMI cable.
6. Connect DVR to your router using an Ethernet cable.
7. Plug the mouse into USB port on the DVR.
8. Plug both power adapters into wall outlet.
9. Turn on the power switch on the back of the DVR (if applicable).
Initial Settings
1. Boot up device, which will display device initialization interface.
2. Setup password for admin (default username).
3. Set security questions and click “OK.”
