ByronStatics PCD-250 Manuale utente
Portable CD Player
MODEL: PCD-250
PLEASE READ THIS INSTRUCTION MANUAL CAREFULLY
AND KEEP IT FOR FUTURE REFERENCE
2
CONTENTS
Important Safety Information................................................................3-7
Operations.....................................................................................11-12
About Discs.............................................................................................7
Product Overview....................................................................................9
Power....................................................................................................10
Care and Maintenance..........................................................................13
Specification..........................................................................................14
Accessories..........................................................................................14
Battery Disposal......................................................................................8
CAUTION: TO RED UCE TH E RIS K OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-
SERVICEABLE PARTS INSIDE. REFER
SE RV IC I NG TO Q U A LI F I E D SE RV IC E
PERSONNEL.
CAUTION:
THIS PLAYER EMPLOYS A LASER SYSTEM.
TO ENSURE PROPER USE OF THIS
PRODUCT.
SHOULD THE UNIT REQUIRE
MAINTENANCE, CONTACT AN AUTHORIZED
SERVICE LOCATION-SEE SERVICE
PROCEDURE.
USE CONTROLS, ADJUSTMENTS OR THE
PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIATION
EXPOSURE.
TO PREVENT DIRECT EXPOSURE TO
LASER BEAM, DO NOT TRY TO OPEN THE
ENCLOSURE. VISIBLE LASER RADIATION
MAY BE PRESENT WHEN THE ENCLOSURE
IS OPENED. DO NOT STARE INTO BEAM.
WARNING:
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.
WARNING:
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, AND ANNOYING
INTERFERENCE, USE THE RECOMMENDED
ACCESSORIES ONLY.
The lightning ash with arrowhead
symbol within an equilateral triangle
is intended to alert the user to the
presence of uninsulated dangerous
voltage within the product`s enclosure that may
be of sufcient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within
an equilateral triangle is intended
to alert the user to the presence of
important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
DANGER:
Inv isi ble a nd ha zar dou s las er
radiation when open and interlock
failed or defeated. Avoid direct
exposure to beam.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
3
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment
generates, uses and can radiate radio frequency
energy and, if not Installed and used in
accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to
radio or television reception, which can be
determined by turning the equipment off and on,
the user is encouraged to try to correct the
interference by one or more of the following
measures:
FCC NOTICE:
Warning: Changes or modifications to this unit
not expressly approved by the party responsible
for compliance could void the user’s authority to
operate the equipment.
●Reorient or relocate the receiving antenna.
Increase the separation between the
equipment and receiver.
●Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
●Consult the dealer or an experienced radio/TV
technician for help.
Increase the separation between the
equipment and receiver.
●
Before using the unit, be sure to read all
operating instructions carefully. Please note
that these are general precautions and may
not pertain to your unit.
1 ) Read these instructions.
All the safety and operating instructions should
be read before the product is operated.
2 ) Keep these instructions.
The safety and operating instructions should
be retained for future reference.
3 ) Heed all warnings.
All warnings on the product and in the
operating instructions should be adhered to.
4 ) Follow all instructions.
All operating and use instructions should be
followed.
5 ) Do not use this apparatus near water.
Do not use this product near water and
moisture, for example: near a bathtub,
washbowl, kitchen sink or laundry tub; in a wet
basement; or near a swimming pool.
6 ) Clean only with dry cloth.
Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a dry cloth for cleaning.
7 ) Do not block any ventilation openings.
Install in accordance with the
manufacturer's instructions.
Slots and openings in the cabinet and in the
back or bottom are provided for ventilation, to
ensure reliable operation of the product and
to protect it from overheating.
These openings must not be blocked or
covered. The openings should never be
blocked by placing the product on a bed,
sofa, rug or other similar surface. This
product should never be placed near or over
a radiator or heat source. This product
should not be placed in a built-in installation
such as a bookcase or rack unless proper
ventilation is provided or the manufacturer's
instructions have been adhered to.
8 ) Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus(including amplifiers) that produce
heat.
9 ) Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding type plug has two blades
and a third grounding prong. The wide blade
or the third prong are provided for your safety.
If the provided plug does not fit into your
outlet, consult an electrician for replacement of
the obsolete outlet.
10 )Protect the power cord from being
walked on or pinched particularly at plugs,
convenience receptacles, and the point where
they exit from the apparatus.
11 ) Only use attachments/accessories
specied by the manufacturer.
12 )Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the apparatus.
When a cart is used,
use caution when
moving the cart
/apparatus combination
to avoid injury from
tip-over.
An appliance and cart
combination should be
moved with care.
Quick stop, excessive force and uneven surfaces
may cause the appliance and cart combination to
overturn.
4
WARNING
USE UNDER SUPERVISION OF AN ADULT
DUE TO LONG CORD
This unit has a long AC cord or other long
cord that can easily be tripped on or pulled on,
causing injury, please make sure it is arranged
so it will not drape over a tabletop, etc. Where
it can be pulled on by children or tripped over
accidentally.
EXERCISE CAUTION AS UNIT HAS
SHARP POINTS.
Portable Cart Warning
13 ) Unplug this apparatus during lightning
storms or when unused for long periods of
time.
To protect your product from a lightning storm,
or when it is left unattended and unused for
long periods of time, unplug it from the wall
outlet and disconnect the antenna or cable
system.
This will prevent damage to the product due to
lightning and power-line surges.
14 ) Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus
has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to
rain or moisture does not operate normally, or
has been dropped.
15 ) Power source.
This product should be operated only from the
type of power source indicated on the marking
label.
If you are not sure of the type of power supply
to your home, consult your appliance dealer or
local power company. For products intended
to operate from battery power, or other source,
refer to the operation instructions.
16 ) Power lines
An outside antenna system should not be
located in the vicinity of overhead power lines
or other electric light or power circuits, or where
it can fall into such power lines or circuits.
When installing an outside antenna system,
extreme care should be taken to keep from
touching such power lines or circuits as contact
with them might be fatal.
17 ) Overloading
Do not overload wall outlets and extension
cords as this can result in a risk of fire or
electric shock.
18 ) Object and liquid entry
Never push objects of any kind into the
product through openings as they may touch
dangerous voltage points or short out parts
that could result in re or electric shock. Never
spill or spray any type of liquid on the product.
19 ) Outdoor antenna grounding
If an outside antenna is connected to the
product, be sure the antenna system is
grounded so as to Provide some protection
against voltage surges and built up static
charges. Section 810 of the National Electric
Code ANSI/NFPA 70 provides information with
respect to proper to grounding of the mast and
supporting structure, grounding of the lead-
in wire to an antenna discharge product, size
of grounding conductors, location of antenna-
discharge product, connection to grounding
electrodes and requirements for the grounding
electrodes.
20 ) Service
Do not attempt to service this product yourself
as opening or removing covers may expose
you to dangerous voltage or other hazards.
Refer all servicing to qualified service
personnel.
21 ) Replacement parts
When replacement parts are required, be sure
the service technician uses replacement parts
specified by the manufacturer or those that
have the same characteristics as the original
parts.
Unauthorized substitutions may result in re or
electric shock or other hazards.
22 ) Safety check
Upon completion of any service or repairs
ANTENNA LEAD
IN WIRE
ANTENNA DISCHARGE UNIT
( NEC SECTION 810-20 )
GROUNDING CONDUCTORS
( NEC SECTION 810-21 )
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
( NEC ART 250, PARTH )
GROUND CLAMPS
to this product, ask the service technician to
perform safety checks to determine that the
product is in proper operational condition.
5
23 ) Wall or ceiling mounting
The product should be mounted to a wall
or ceili n g o nly as recom m e nded by the
manufacturer.
24 ) Damage requiring service
Unplug this product from the wall outlet and
refer service to qualified service personnel
under the
following conditions.
a ) When the power-supply cord or plug is
damaged.
b ) If liquid has been spilled or objects have
fallen into the product.
c ) If the product has been exposed to rain or
water.
d ) If the product does not operate normally
by following the operating instructions. Adjust
only those controls that are covered by the
operating instructions, as an adjustment of
other controls may result in damage and will
and require extensive work by a qualified
technician to restore in the product to its
normal operation.
e ) If the product has been dropped or the
cabinet has been damaged.
in performance-this indicates a need for
service.
25 ) Note to CATV system installer
This reminder is provided to call the CATV
system installer's attention to Article 820-40
of the NEC that provides guidelines for proper
grounding and, in particular, specifies that
the cable ground shall be connected to the
grounding system of the building, as close to
the point of cable entry as practical.
NOTE: Refer all servicing to qualied service
personnel Servicing is required when the unit
has been damaged in any way such as the
has been damaged, liquid has been spilled
into unit, the unit has been exposed to rain or
moisture, the unit has been dropped or the unit
does not operate normally.
NOTES ON HANDLING:
●When shipping the unit, always use the
original shipping carton and packing
materials. For maximum protection, repack
the unit as it was originally packed at the
factory.
●Do not use volatile liquids, such as insect
spray, near the unit. Do not leave rubber or
plastic products in contact with the unit for a
long time. They will leave marks on the
finish.
● The top and rear panels of the unit may
become warm after a long period of use.
This is normal and not a malfunction.
●When the CD player is not in use, be sure to
remove the disc and turn off the power.
NOTES ON LOCATING THE CD PLAYER:
When you place this unit near a TV, radio or
VCR, the playback picture may become poor
and the sound may be distorted. In this case,
move the unit away from the TV, radio or VCR.
NOTES ON CLEANING:
Use a soft, dry cloth for cleaning
●For stubborn dirt, soak the cloth in a weak
detergent solution, wring well and wipe. Use
a dry cloth to wipe it dry. Do not use any
type of solvent, such as thinner and
benzene, as they may damage the surface
of the unit.
● If you use a chemical-saturated cloth to
clean the unit, follow that product's
instructions.
Warning: Cleaning and adjustment of
lenses and /or other components of playback
mechanism should be performed by a
qualified service technician.
NOTES ON MOISTURE CONDENSATION:
Moisture condensation damages the DVD
player.
Please read the following carefully.
●Moisture condensation occurs, for
example, when you pour a cold drink into a
glass on a warm day. Drops of water form
on the outside of the glass. In the same
way, moisture may condense on the optical
pick-up lens inside this unit, one of the most
crucial internal parts of the CD player.
f ) When the product exhibits a distinct change
following: the power-supply cord or plug
6
●When you bring the CD player directly from a cold place to a warm place.
●When you use the CD player in a room where you just turned on the heater, or a place where the
cold wind from the air conditioner directly hits the unit.
●ln summer, when you use the CD player in a hot and humid place just after you moved the unit
from an air conditioned room.
●When you use the CD player in a humid place.
Do not use the CD player when moisture condensation may occur.
●lf you use the CD player in such a situation, it may damage discs and internal parts. Remove the
disc, connect the AC/DC Adaptor to the CD player and the wall outlet, turn on the CD player and
leave it ON for two or three hours. After two or three hours, the CD player will have warmed up
and evaporated any moisture.
PLAYABLE DISCS:
The following discs can be played back on this CD player:
DISC TYPES:
AUDIO CD
Data on an audio CD is divided into sections called tracks ,
each of which is given a track number.
ABOUT DISCS
7
Warning: To prevent possible hearing damage,
do not listen at high volume for long periods.
Moisture condensation occurs during the following cases:
The batteries used with this product contain chemicals that are harmful to the
environment. To preserve our environment, dispose of used batteries according to your
local laws or regulations. Do not dispose of batteries with normal household waste.
For more information, please contact the local authority or your retailer where you
purchased the product.
NOTE:
●Do not mix old and new batteries.
●Do not mix different battery types; alkaline, standard (Carbon – Zinc), or rechargeable
(Nickel – Cadmium) batteries.
●Do not expose battery to excessive physical shock, vibration, or liquids.
●Do not disassemble, attempt to repair or deform the battery.
●Do not dispose batteries in fire.
●Do not peel or damage the battery label. Risk of explosion and damage to product if
batteries are replaced incorrectly. Follow safety information on battery.
●Remove batteries from the unit, if it is not intended to be used for an extended period of
time.
●Batteries shall not be exposed to excessive heat such as sunshine or fire.
●Dispose of the used batteries according to the requirements of the local regional needs.
BATTERY DISPOSAL
8
1 2 3 4 5 6 7 8 10
11 14
12 13 15
16
17
1. DC IN Jack
2. Earphone Jack
3.
Speed Up/Down Button
E/P
4. E/P(ESP/program) Button
5. A-B Repeat Button
6. M/T(Mode/Timer) Button
7. +10/EQ Button
8. Play/pause Button
9. Stop Button
9
10. Display
11. Open Button
12. Previous Button
13. Next Button
14. Volume Up/Down Button
15. String Hole
16. Battery Compartment
17. Lock Switch
PRODUCT OVERVIEW
9
1. Insert one end of the USB cable to the DC IN jack on the unit.
2. Plug the other end with power adapter (not included) to wall outlet.
POWER
B: Powered by "1.5V, LR6, AA" batteries required.(not included)
A: Powered by USB Cable
BATTERY PRECAUTIONS
Follow these precautions when using batteries in this player:
1. Warning-Danger of explosion if battery is incorrectly replaced. Replace only with the same
or equivalent type.
2. Use only the size and type of batteries specified.
3. Be sure to follow the correct polarity when installing the batteries as indicated in battery
compartment. A reversed battery may cause damage to the device.
4. Do not mix different types of batteries together (e.g. Alkaline, Rechargeable and Carbon-
zinc) or old batteries with fresh ones.
5. If the devices is not to be used for a long period of time, remove the batteries to prevent
damage or injury from possible battery leakage.
7. Remove batteries promptly if consumed.
8. Clean the battery contacts and also those of the device prior to battery installation.
6. Do not try to recharge a battery not intended to be recharged; it can overheat and rupture.
(Follow battery manufacturer's directions.)
-
+
-
+
1
2
..........
..........
.................
.................
10
Indice
Altri manuali ByronStatics Lettore CD
