BZB Gear BG-UM44-100M-KIT Manuale utente

BG-UM44-100M-KIT

4X4 4K 18Gbps UHD HDMI/HDBaseT/Audio Matrix Switcher with

2-Way IR/ARC/Ethernet/IP and RS-232 Control

User Manual

BZBGEAR BG-UM44-100M-KIT PRODUCT MANUAL

TABLE OF CONTENTS

Statement 3

Safety Precaution 3

Introduction 4

Features 4

Packing List 5

Speciﬁcations 5

Operation Controls and Functions 6

IR Remote 9

IR Control System 10

IR Cable Pin Assignment 12

EDID Management 12

Matrix Audio and RS-232 Introduction 14

Web GUI User Guide 15

RS-232 Control Command 24

Application Example 30

Tech Support 31

Warranty 31

Mission Statement 31

Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: +1(888)499-9906 ·Email: support@bzbgear.com 2

BZBGEAR BG-UM44-100M-KIT PRODUCT MANUAL

Statement

Please read these instructions carefully before connecting, operating, or conﬁguring this

product. Please save this manual for future reference.

Safety Precaution

●To prevent damaging this product, avoid heavy pressure, strong vibration, or immersion

during transportation, storage, and installation.

●The housing of this product is made of organic materials. Do not expose to any liquid,

gas, or solids which may corrode the shell.

●Do not expose the product to rain or moisture.

●Unplug this device during lightning storms

●Clean only with a soft dry microﬁber cloth.

●To prevent the risk of electric shock, do not open the case. Installation and maintenance

should only be carried out by qualiﬁed technicians.

●Do not use the product beyond the speciﬁed temperature, humidity, or power supply

speciﬁcations.

●This product does not contain parts that can be maintained or repaired by users.

Damage caused by dismantling the product without authorization from BZBGEAR is not

covered under the warranty policy.

●Installation and use of this product must strictly comply with local electrical safety

standards.

●Only use accessories speciﬁed by the manufacture

●Product speciﬁcations may be subject to technical upgrades without further notice

Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: +1(888)499-9906 ·Email: support@bzbgear.com 3

BZBGEAR BG-UM44-100M-KIT PRODUCT MANUAL

Introduction

The BG-UM44-100M-KIT is a 4K UHD 4X4 HDMI HDBaseT matrix switch that can connect

four HDMI sources to eight displays. This device features four HDMI outputs mirrored to four

simultaneous HDBaseT outputs. The HDBaseT outputs can extend a 4K@60Hz 4:4:4 video

signal at distances up to 328 feet (100 meters) over a single Cat5e/6/7 cable.

This product is equipped with many advanced features including a 4K to 1080P

down-scaler as well as smart EDID management for easy integration. This unit also oﬀers

audio de-embedding from any of the HDMI sources via analog audio and digital coaxial

audio outputs.

Each extender features bi-directional IR, RS-232, and 2 LAN ports for IP control. The base

unit can be operated using the front panel controls and OLED screen as well as IR, RS-232,

IP control, and web interface.

Features

●HDCP 2.2 and HDCP 1.4 compliant

●4 HDMI inputs, 4 HDMI & HDBaseT mirrored outputs

●HDMI ports transmit 18Gbps lossless uncompressed video bandwidth

●Support 18Gbps lossless compressed HDBaseT signal transmission

●Support 4K->1080P Down Scaler

●Dolby Vision, HDR10+, HLG

●HDBaseT output can extend video transmission distance up to 328ft / 100 meters via

a single cat5e/6/7 cable and the resolution is up to 4K@60Hz 4:4:4.

●HDMI audio pass-through up to 7.1CH HD audio (LPCM, Dolby TrueHD and DTS-HD

Master Audio)

●Support ARC function on local HDMI and HDBaseT output ports

●IR matrix and Audio matrix

●Smart EDID management

●24V POC on all HDBaseT ports

●Control via front panel buttons, IR remote, RS-232, LAN, and Web GUI

Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: +1(888)499-9906 ·Email: support@bzbgear.com 4

BZBGEAR BG-UM44-100M-KIT PRODUCT MANUAL

Packing List

●1x 4x4 HDMI and HDBaseT Matrix

Switch

●4x HDBaseT Receiver

●1x Matrix IR Remote

●1x 100~240V AC 50/60Hz Power cable

●1x RS-232 serial cable (1.5 meters,

male to female head)

●8x 3-pin Phoenix Connector

●5x IR Blaster cable (1.5 meters)

●6x 20~60KHz IR Receiver cable (1.5

meters)

●10x Mounting Ear (Matrix and Receiver)

●1x User Manual

Speciﬁcations

Technical

HDCP Compliance

HDCP 2.2 and HDCP 1.4

Video Bandwidth

18Gbps

Video Resolution

Up to 4K2K@50/60Hz (4:4:4)

Color Space

RGB, YCbCr 4:4:4/4:2:2/4:2:0

Color Depth

12-bit (4K), 16-bit (1080P)

HDMI Audio Formats

(Pass-through)

PCM2.0/5.1/7.1CH, Dolby Digital/Plus/EX, Dolby True HD, DTS, DTS-EX, DTS-96/24, DTS High

Res, DTS-HD Master Audio, DSD

Coax Audio Formats

PCM 2.0, Dolby Digital / Plus, DTS,

L/R Audio Formats

PCM2.0

HDR formats

4:4:4, 4:2:2, 4:2:0 (10,12bit deep color)

HDR10, HDR10+, Dolby Vision, HLG

Infrared

20KHz ~ 60KHz

ESD Protection

Human-body Model: ±8kV (Air-gap discharge), ±4kV (Contact discharge)

Connection

Input Ports

4×INPUT [HDMI Type A, 19-pin female]

6×IR INPUT [3.5mm Stereo Mini-jack]

2×Stereo Audio [3.5mm Stereo Mini-jack B]

1×SPDIF(OPTICAL)

1×SPDIF(COAX)

Output Ports

4×HDMI OUTPUT [HDMI Type A, 19-pin female]

4×HDBaseT port [RJ45]

5×IR OUTPUT [3.5mm Stereo Mini-jack]

4×RS-232 [3-pin Phoenix connector] 4×SPDIF(COAX)

4×Stereo Audio [3.5mm Stereo Mini-jack]

1×LAN [RJ45]

Control Ports

1×TCP/IP [RJ45]

1×RS-232 [D-Sub 9]

HDBaseT Receiver

Input Ports

1×HDBaseT IN [ RJ45]

1×IR IN [3.5mm Stereo Mini-jack]

Output Ports

1×HDMI OUT [HDMI Type A, 19-pin female]

1×IR OUT [3.5mm Stereo Mini-jack]

Control Ports

1×SERVICE [Micro USB, Update port]

1×RS-232 [Phoenix jack]

2×LAN [RJ45]

Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: +1(888)499-9906 ·Email: support@bzbgear.com 5

BZBGEAR BG-UM44-100M-KIT PRODUCT MANUAL

Mechanical

Housing

Metal Enclosure

Color

Black

Dimensions

TX: 440mm (W)×274mm (D)×45mm (H)

RX: 163mm (W)×90.3mm (D)×18mm (H)

Weight

TX: 3977g, RX: 392g

Power Supply

AC 100 - 240V 50/60Hz

Power Consumption

70W (Max)

Operating Temperature

0°C ~ 40°C / 32°F ~ 104°F

Storage Temperature

-20°C ~ 60°C / -4°F ~ 140°F

Relative Humidity

20~90% RH (non-condensing)

Resolution / Distance

4K60 - Feet / Meters

CAT5e/6/7

328ft / 100M

Resolution / Cable length

4K60 - Feet / Meters

4K30 - Feet / Meters

1080P60 - Feet / Meters

HDMI IN / OUT

16ft / 5M

32ft / 10M

50ft / 15M

The use of “Premium High-Speed HDMI” cable is highly recommended.

Operation Controls and Functions

Matrix Panel

Front Panel

NO.

Name

Function Description

LED screen

Display matrix switching status, input / output port, EDID, Baud rate, IP Address.

Power LED

The LED will illuminate in green when the product is connected to power supply, and red when the

product is on standby.

OUTPUT / INPUT

buttons

You need to press an output button (1~4) ﬁrstly and then press an input button (1~4) to select the

corresponding input source for the output port.

MENU / ENTER /

UP / DOWN

①EDID Check: On the initial OLED display screen, press “MENU” button to enter the Matrix

switching state interface, then press “UP/DOWN” button to check the current EDID information of

each HDMI input port.

②EDID setting: On the initial OLED display screen, press “MENU” button to enter the EDID setting

interface, press “UP/DOWN” button to select the required EDID and press the “ENTER” button. A

prompt “copy to input :” will appear. Then press “UP/DOWN” button to select the input port you

need to set, and press “ENTER” button again to conﬁrm.

③Baud rate setting: On the initial OLED display screen, press “MENU” button to enter the Baud

rate interface, and press “UP/DOWN” button to select the required Baud rate, ﬁnally press the

“ENTER” button to conﬁrm the setting.

④IP Address Check: On the initial OLED display screen, press “MENU” button to enter the IP

interface, then press “UP/DOWN” button to check the current IP address.

Pressing the “MENU” button again will return to the initial OLED display status.

POWER button

Press and hold the POWER button for 3 seconds to enter the standby mode, then press the button

again to wake up the device.

IR Window

IR receiver window, it only receives the IR remote signal from this product.

LOCK button

Press the LOCK button to lock front panel buttons (Except the power button); Press the button

again to unlock.

Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: +1(888)499-9906 ·Email: support@bzbgear.com 6

BZBGEAR BG-UM44-100M-KIT PRODUCT MANUAL

Rear Panel

No.

Name

Function Description

IR EXT

If the IR receiver window of the unit is blocked or the unit is installed in a closed area out of

infrared line of sight, the IR receiver cable can be inserted to the “IR EXT” port to receive the IR

remote signal.

IR INPUT ports

Connect to IR receiver cable, the IR receive signal will emit to “IR OUT” port of the HDBaseT

Receiver.

IR OUTPUT ports

Connect to IR blaster cable, the IR emit signal is from “IR IN” port of the HDBaseT Receiver.

AUDIO IN ports

L/R, optical and coaxial audio input ports, connect to external audio source device such as PC or

DVD.

RS-232 port

Connect to a PC or control system by 3-pin phoenix connector serial cable to transmit command

between the Matrix and HDBaseT Receiver.

DIGITAL port

Coaxial audio output port, connect to audio output device such as audio ampliﬁer via a coaxial

cable.

STEREO port

Stereo audio output port, connect to an ampliﬁer or speaker via a 3.5mm audio cable.

GND

The housing is connected to the ground.

TCP/IP port

This port is the link port for TCP/IP control and connect to an active Ethernet link by an RJ45

cable.

RS-232 port

Connect to a PC or control system by D-Sub 9-pin cable to control the Matrix.

INPUT ports (1-4)

HDMI input ports, connect to HDMI source device such as DVD or PS4 with an HDMI cable.

OUTPUT ports (1-4)

HDBaseT ports, connect to HDBaseT Receiver via CAT cable.

HDMI output ports, connect to HDMI display device such as TV or monitor with an HDMI cable.

LAN

This port is connected to a router and the LAN port of the HDBaseT Receiver can connect Internet

device such as PC or laptop.

POWER input

Connect to 100~240V AC 50/60Hz power cable.

Data Signal

Indicator Lamp

Connection Signal

Indicator Lamp

●Illuminating: HDMI signal with HDCP.

●Flashing: HDMI signal without HDCP.

●Dark: No HDMI signal.

●Video (OUT)

●Illuminating: Matrix and HDBaseT

Receiver are in good connection

status.

●Flashing: Matrix and HDBaseT

Receiver are in poor connection status.

●Dark: Matrix and HDBaseT Receiver

are not connected.

Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: +1(888)499-9906 ·Email: support@bzbgear.com 7

BZBGEAR BG-UM44-100M-KIT PRODUCT MANUAL

HDBaseT Receiver Panel

No.

Name

Function Description

POWER LED

Power LED indicator, LED will illuminate when the device is connected to a power supply.

SERVICE port

Firmware update port

DC 24V

P. lug the DC 24V/1A power cord into this port and connect the adapter to AC wall outlet.

Note: The Matrix supports POC function, so the Receiver doesn’t need a power supply when

HDBaseT IN port is connected to HDBaseT port of the Matrix.

HDBaseT IN port

Connect to HDBaseT output port of the Matrix with CAT cable.

Connection Signal Indicator

Lamp (Green)

●Illuminating: Matrix and Receiver are in good connection status.

●Flashing: Matrix and Receiver are in poor connection status.

●Dark: Matrix and Receiver are not connected.

Data Signal Indicator Lamp

(Orange)

●Illuminating: HDMI signal with HDCP.

●Flashing: HDMI signal without HDCP.

●Dark: No HDMI signal.

IR IN

Connect to IR receiver cable, the IR signal will emit to IR OUT port of the Matrix.

IR OUT

Connect to IR blaster cable, the IR emit signal is from IR IN port of the Matrix.

HDMI OUT port

HDMI output port, connect to HDMI display device such as TV or monitor with HDMI cable.

RS-232 port

Connect to a PC or control system by 3-pin phoenix connector cable to transmit command

between the Matrix and HDBaseT Receiver.

LAN ports

Connect Ethernet cables to these ports to provide a wired Ethernet connection to local

devices.

Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: +1(888)499-9906 ·Email: support@bzbgear.com 8

BZBGEAR BG-UM44-100M-KIT PRODUCT MANUAL

IR Remote

1. Power on or Standby: Power on the Matrix or set it to

standby mode.

2. Output 1: Press 1\2\3\4 button to select input source to

HDMI OUTPUT 1.

3. Output 2: Press 1\2\3\4 button to select input source to

HDMI OUTPUT 2.

4. Output 3: Press 1\2\3\4 button to select input source to

HDMI OUTPUT 3.

5. Output 4: Press 1\2\3\4 button to select input source to

HDMI OUTPUT 4.

Select the last ◀ or next ▶ input source button.

The Matrix input and output sources can be selected by using the IR remote. There

are two ways to receive the IR remote signal.

Method 1: The IR window accepts the IR remote signal. When using the IR remote, the

furthest distance is 7 meters and the angle is ± 45°. The diagram is shown as below:

Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: +1(888)499-9906 ·Email: support@bzbgear.com 9

BZBGEAR BG-UM44-100M-KIT PRODUCT MANUAL

IR Control System

The BG-UM44-100M-KIT is not only a matrix switch but also an extender that supports

bi-directional IR control. When the matrix is connected to a HDBaseT receiver through a Cat

5e/6/7 cable, you can control the remote display device (HDBaseT) or input source device

(matrix) through an IR signal transmission. NOTE: The IR signal transmission method is

diﬀerent from matrix (local) to HDBaseT receiver (remote) and from HDBaseT receiver

(remote) to matrix (local).

At the matrix (local end): the IR signal is one-to-one transmission. For example, the IR IN 1

port signal of the matrix will emit to the IR OUT port of the HDBaseT Receiver 1, and the IR

IN 3 port of the matrix will emit a signal to the IR OUT port of the HDBaseT Receiver 3. It

does not follow the video switch/change. The IR IN ALL port of the matrix will emit to all IR

OUT ports of HDBaseT receivers simultaneously. Please see the following connection

diagram.

Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: +1(888)499-9906 ·Email: support@bzbgear.com 10

Indice

Altri manuali BZB Gear Commutatore a matrice

BZB Gear

BZB Gear BG-UHD-42M Manuale utente

BZB Gear

BZB Gear MXB88H Manuale utente

BZB Gear

BZB Gear BG-UHD-42M Manuale utente

BZB Gear

BZB Gear BG-M88S-H2A-KIT Manuale utente

BZB Gear

BZB Gear BG-UHD-88M Manuale utente

BZB Gear

BZB Gear FMS-88H2A Manuale utente

BZB Gear

BZB Gear BG-UM88-150L-KIT Manuale utente

BZB Gear

BZB Gear BG-UM88-150L-KIT Manuale utente

BZB Gear

BZB Gear BG-UHD-44M Manuale utente

BZB Gear

BZB Gear BG-UHD-88M Manuale utente

BZB Gear

BZB Gear BG-UM44-150L-KIT Manuale utente

BZB Gear

BZB Gear BG-UHD-88M Manuale utente

BZB Gear

BZB Gear BG-UM88-100M-KIT Manuale utente

BZB Gear

BZB Gear BG-8K-42MA Manuale utente

BZB Gear

BZB Gear BG-4K-VP44 Manuale utente

BZB Gear

BZB Gear BG-8K-22MA Manuale utente

BZB Gear

BZB Gear BZ-UHD-88M-ARC Manuale utente

BZB Gear

BZB Gear BG-UM88-150L-KIT Manuale utente

BZB Gear

BZB Gear BG-UHD-1616M Manuale utente

BZB Gear

BZB Gear BG-UHD-1616M Manuale utente

BZB Gear

BZB Gear BG-UM44-100M-KIT Manuale utente

BZB Gear

BZB Gear BG-UM-88ANS Manuale utente

BZB Gear

BZB Gear BG-UHD-88M18G Manuale utente

BZB Gear

BZB Gear BG-UHD-44M18G Manuale utente

Manuali Commutatore a matrice popolari di altre marche

Broadcast Tools

Broadcast Tools SS 8.2 Manuale utente

Altimium

Altimium MATF32 Manuale utente

ALFAtron

ALFAtron ALF-MUK44N Manuale utente

Monoprice

Monoprice Blackbird 15377 Manuale utente

Kramer

Kramer XL 3216VS Manuale utente

PTN

PTN FMX12 Manuale utente

CYP

CYP nT15GX01 Manuale utente

Kramer

Kramer VP-2x2 Manuale utente

Kramer

Kramer Sierra Video 6432V5xl Manuale utente

TESmart

TESmart HMA0402A40 Manuale utente

Octava

Octava HD4XSTPMX Manuale utente

Intelix

Intelix FLX-88 Istruzioni operative

Kramer

Kramer LASSEN XL 3232S Manuale utente

Roland

Roland XS-1HD Manuale utente

Kramer

Kramer VS-66HDCPxl Manuale utente

Atlona

Atlona AT-HDMI-22M Manuale utente

Link

Link HD8X8 Manuale utente

AMX

AMX AVS-OP-2020-117 Istruzioni e ricette