C & K Systems Alpha Plus Manuale utente

Using your

Alpha Plus keypad

With your

Part Number 5-051-373-00 Rev C

System 236

System 238

System 2316

❑

System 236i

System 238i

System 2316i

Thank you for purchasing this C K alarm system. Your system is one of the most powerful

and advanced alarm systems on the market today designed to provide you with years of

reliable operation.

This manual explains how to operate your alarm system. Basic operating instructions are also

printed on the small label attached to the inside of your keypad(s) door.

If you have questions or need help with your

alarm system, call:

______________________________________

(Alarm Company Name)

If you have monitoring questions or in cases

of accidental alarms, call:

______________________________________

(Monitoring Station Name)

When calling the monitoring company, know the following:

My Account Number is: _______________________ My Password is:_____________________

Table of contents

Getting acquainted ..............................................4-5

What the lights mean ...........................................6

What the sounds mean ....................................... 7

Arming the system ...............................................8-17

Arming options ....................................................18-19

Disarming the system ..........................................20

After an alarm ...................................................... 21

Options ................................................................22-34

Duress (Systems 238, 238i, 2316, 2316i ,236i only) ...... 23-24

Guest combination (Systems 238, 2316 only) .......... 25

Changing a User PIN - System 238......................... 26-27

Deleting a User PIN - System 238 ............................ 28

Changing a User PIN - System 236, 2316 ............... 29-30

Deleting a User PIN - System 236, 2316 .................. 31-32

Resetting smoke detectors............................. 33

Testing your system ............................................ 35-37

Local System Test .......................................... 35

Standby Battery Test ......................................36

Bell/Siren Test .................................................36

Central Station Test ........................................ 37

Telephone trouble ...............................................38

Customizing your keypads ..................................39

Language versions .............................................. 40

Smoke detector placement .................................41

Emergency evacuation ........................................ 42

Definitions ............................................................43

Limitations of your alarm system .........................44

Test procedures index ......................................... 45

Zone description list ............................................46-48

FCC Notice / Industry Canada ............................ 50-51

What your alarm system is...

Your alarm system is made up of a control panel and several detection devices like motion sensors,

magnetic contacts, and so on. Specific areas of detection are called zones. Zones can be programmed to

have different characteristics. Some zones may be 24-hour zones, that is, they remain armed even when

the alarm system is off. Zones used for fire detection, for example, are always 24-hour zones. In addition,

some zones can be programmed to allow bypassing. When you bypass a zone, you temporarily remove

it from the alarm system. Always remember, however, that bypassed zones are not protected.

How your alarm system wor s...

When a detection device is triggered, the status of its zone goes from normal to FAULTED. If armed,

the control panel responds by reporting an alarm condition on site sounding bells, message on keypad

display and if programmed, by transmitting an alarm signal over the telephone wires to a

central monitoring station. The monitoring station then dispatches the appropriate authorities.

Some of your system's operations require you to enter your personal identification number (PIN) on

the keypad. These include ARMING and DISARMING.

Along with its many other features, your system can be programmed to ARM INSTANTLY or to ARM

WITH TIME DELAY (i.e., after giving you time to leave the premises).

Each alarm system in the 2300 family is designed to meet the specific needs of a variety of applications. System 236

is specifically designed for smaller, six zone applications.

Systems 238 and 2316 are designed for applications requiring protection of eight and sixteen zones, respectively.

Although these systems do not offer all the same options, your alarm professional has installed the system best suited

for your application. Refer to the headings at the top of each page to determine if an option is available on your system.

(If no systems are listed in the page heading, the option is available on all systems.)

Some of the available features of your alarm system are also optional, and will only be installed if appropriate for

your installation. In addition, some system features will require you to enter your personal identification number

(PIN).

As you read through this manual, watch for boxes like these:

If an optional feature has been installed in your system, its

OPTION INSTALLED box will be checked.

.If a feature of your system requires you to enter your personal

identification number, its PIN REQUIRED box will be checked.

OPTION

INSTALLED

REQUIRED

ARMED

LIGHT

POWER

LIGHT REMARKS

AC POWER FAILURE

LOW BATTERY

SYSTEM ARMED

SYSTEM DISARMED

SYSTEM IS ARMED

WITH DELAY ZONES

CONVERTED TO INSTANT

Slow Flash

Off

Power Failure. System is operating on battery.

Battery is low; Call your service department. LCD

display will show system trouble.

Protection is on.

Protection is off.

LCD DISPLAY

Off

Slow Flash System armed using * 7 #.

SYSTEM TROUBLE MESSAGES

AC Fail Low Battery

Connection Fail Bell Fuse Fail

NORMAL MESSAGES

Ready to ARM Faulted Zone

Invalid PIN Entry-Disarm Now

Trouble Zone

*Not available on System 236/236i

SOUND MEANING

2 beeps system armed or disarmed

successful central station test or battery test

5 beeps

unauthorized command attempted

error changing PIN number

wrong PIN number entered

continuous tone, beeping fast for last ten seconds entry delay time

continuous beeping, speeding up for last ten seconds exit delay time

2 second beep door chime

ring back after closing report*

zone faulted during walk-test

chirping (1 second on, 4 seconds off) chirp alert warning: system is armed, but a delay zone is faulted; you

must disarm the system before entry delay expires or alarm will occur*

alarm signal for zone programmed for chirping bell or siren

continuous tone alarm signal for zone programmed for steady bell or siren

circuit malfunction (trouble on supervised loops only)

pulsed tone (2 seconds on, 2 seconds off) alarm signal for zone programmed for pulsed bell or siren

invalid function

Ma e sure the display reads READY TO ARM.

Faulted zones must be cleared or bypassed before the system can be armed. If the

display reads NOT READY TO ARM, followed by FAULTED ZONE, push the # key. The

display will then indicate which zone(s) are faulted. For more information, refer to the

sections Bypassing Zones and After An Alarm Occurs.

TO ARM THE SYSTEM:

Enter your PIN and push the

# ey.

REQUIRED #

Don't pause for more than 5 seconds while entering the digits or the control panel will

reject your PIN number.

PIN = 4 digits long

236/236i

If you make a mistake while entering your PIN number, the keypad will beep five times.

After the fifth beep, enter your PIN number again.

PIN = 2 - 5 digits long

2316/2316i

238/238i

Ma e sure the red ARM light comes on.

The keypad will beep twice to confirm that the system is armed.

The display will read EXIT NOW.

Exit through any TIME DELAY DOOR within seconds.

The exit delay time can be programmed from 10 seconds to 150 seconds.

If the EXIT PRE-ALARM option is installed, the keypad will beep slowly until 10 seconds

before the delay time expires, then rapidly for the last 10 seconds.

OPTION

INSTALLED

.A bar graph will appear on the display, showing how much exit time remains.

Once the exit time has expired, the keypad will beep twice to confirm that the system is

armed, and the display will read ARMED.

The rest of the Arming The System section describes other arming options, and explains how

to bypass zones before arming the system. No matter how your system is programmed, you

will always disarm it in the same way: enter your PIN, then push the # ey.

AUTO HOME ARMING

Ma e sure the display reads READY TO ARM.

Enter your PIN and push the

# ey.

REQUIRED

.If you do not exit before the exit delay time expires, the system will automatically arm

perimeter zones and bypass interior zones.

.If you exit through an exit delay door during the Exit Delay Time, the system will auto-

matically arm interior and perimeter zones.

This option enables the system to automatically bypass interior zones if

you arm the system but do not leave the premises. The perimeter zones

will be armed, and the entry delay will remain intact.

System: 236/236i ONLY

OPTION

INSTALLED

Indice

Altri manuali C & K Systems Tastiera

C & K Systems

C & K Systems System 236 Manuale utente

C & K Systems

C & K Systems System 238 Manuale utente

C & K Systems

C & K Systems System 236i Manuale utente

Manuali Tastiera popolari di altre marche

BFT

BFT SELETTO Manuale utente

Micro Id

Micro Id MP7G3BL Manuale di istruzioni

WindowMaster

WindowMaster WLI 130 Manuale utente

ACT

ACT ACT PRO 1030 Manuale utente

Cardin

Cardin SSB Series Manuale utente

Harman Kardon

Harman Kardon KP 1 Manuale utente

Chamberlain

Chamberlain KPR2000 Guida utente

CYP

CYP CR-KP1 Manuale utente

Aeware

Aeware k-35 Series Guida di riferimento

Aritech

Aritech CS-175 Series Manuale utente

GE NetworX NX-1600E Series Manuale utente

Lenze AC Tech

Lenze AC Tech MC SERIES Manuale utente

Burg Wächter

Burg Wächter secuENTRY 7711 Manuale utente

Aeware

Aeware in.k450 Manuale utente

Lenze

Lenze EPM-H410 Manuale utente

Toshiba

Toshiba RKP007Z Manuale utente

Gemini

Gemini GEM-DXK1 KEYPAD Manuale utente

Russound

Russound MDK-C5 Manuale operativo