CAB EOS2 Manuale utente
Made in Germany
Cutter
Operator's Manual
EOS2 / EOS5
2 2Operator's Manual
Edition: 10/2018 - Part No. 9003263
Copyright
This documentation as well as translation hereof are property of cab Produkttechnik
GmbH & Co. KG.
The replication, conversion, duplication or divulgement of the whole manual or parts
of it for other intentions than its original intended purpose demand the previous
written authorization by cab.
Editor
Regarding questions or comments please contact cab Produkttechnik GmbH & Co.
KG.
Topicality
Due to the constant further development of our products discrepancies between
documentation and product can occur.
Please check www.cab.de for the latest update.
Terms and conditions
Deliveries and performances are effected under the General conditions of sale of
cab.
Germany
cab Produkttechnik
GmbH & Co KG
Karlsruhe
Phone +49 721 6626 0
www.cab.de
USA
cab Technology, Inc.
Chelmsford, MA
Phone +1 978 250 8321
www.cab.de/us
Taiwan
cab Technology Co., Ltd.
Taipeh
Phone +886 (02) 8227 3966
www.cab.de/tw
China
cab (Shanghai) Trading Co., Ltd.
Guangzhou
Phone +86 (020) 2831 7358
www.cab.de/cn
France
cab Technologies S.à.r.l.
Niedermodern
Phone +33 388 722501
www.cab.de/fr
Mexico
cab Technology, Inc.
Juárez
Phone +52 656 682 4301
www.cab.de/es
China
cab (Shanghai) Trading Co., Ltd.
Shanghai
Phone +86 (021) 6236 3161
www.cab.de/cn
South Africa
cab Technology (Pty) Ltd.
Randburg
Phone +27 11 886 3580
www.cab.de/za
3
1 Introduction....................................................................................4
1.1 Instructions ......................................................................................4
1.2 Intended Use ...................................................................................5
1.3 Safety Instructions...........................................................................6
1.4 Environment.....................................................................................6
1.5 Technical Data.................................................................................6
2 Mounting.........................................................................................7
2.1 Removing the Tear-off Plate ............................................................7
2.2 Mounting the Cutter.........................................................................8
3 Operation........................................................................................9
3.1 Loading Material..............................................................................9
3.2 Reference to the Programming........................................................9
3.3 Standard Operation .......................................................................10
3.4 Cutting on Demand........................................................................10
4 PrinterConguration...................................................................11
5 Cleaning and Replacing the Blades...........................................13
6 Licenses .......................................................................................15
6.1 Reference to the EU Declaration of Conformity.............................15
6.2 FCC ...............................................................................................15
Table of Contents
4 41 Introduction
1.1 Instructions
Important information and instructions in this documentation are designated
as follows:
Danger!
Draws your attention to an exceptionally grave, impending danger
to your health or life.
!
Warning!
Indicates a hazardous situation that could lead to injuries or
material damage.
!
Attention!
Draws attention to possible dangers, material damage or loss of
quality.
i
Note!
Gives you tips. They make a working sequence easier or draw
attention to important working processes.
Environment!
Gives you tips on protecting the environment.
Handling instruction
Reference to section, position, illustration number or document.
Option (accessories, peripheral equipment, special ttings).
Time Information in the display.
51 Introduction
1.2 Intended Use
• The device is intended exclusively as an option for the printers of the
EOS series for cutting suitable materials that have been approved by the
manufacturer. Any other use or use going beyond this shall be regarded
as improper use. The manufacturer/supplier shall not be liable for damage
resulting from unauthorized use; the user shall bear the risk alone.
• Usage for the intended purpose also includes complying with the operating
manual, including the manufacturer‘s maintenance recommendations and
specications.
• The device is manufactured in accordance with the current technological
status and the recognized safety rules. However, danger to the life and
limb of the user or third parties and/or damage to the device and other
tangible assets can arise during use.
• The device may only be used for its intended purpose and if it is in perfect
working order, and it must be used with regard to safety and dangers as
stated in the operating manual.
i
Note!
All documentations can also currently be found in the Internet.
!
Warning!
This is a class A product. In a domestic environment this product
may cause radio interference in which case the user may be
required to take adequate measures.
6 61 Introduction
1.3 Safety Instructions
• Disconnect the printer from the electrical outlet before mounting or
removing the cutter.
• The cutter may only be operated when it is mounted on the printer.
• Risk of injury, particularly during maintenance, the cutter blades are sharp.
• Work going beyond this may only be performed by trained personnel or
service technicians.
• Unauthorized interference with electronic modules or their software can
cause malfunctions. Other unauthorized work on or modications to the
device can also endanger operational safety.
• Always have service work done in a qualied workshop, where the
personnel have the technical knowledge and tools required to do the
necessary work.
• Warning stickers must not be removed, as then you and other people
cannot be aware of dangers and may be injured.
1.4 Environment
Obsolete devices contain valuable recyclable materials that should be sent
for recycling.
Send to suitable collection points, separately from residual waste.
The modular construction of the printer enables it to be easily disas-
sembled into its component parts.
Send the parts for recycling.
Take the electronic circuit boards to public waste disposal centers or to
the distributor.
1.5 Technical Data
Cutter EOS2 EOS5
for printer type
EOS2 EOS5
Cutting length mm ≥ 10
Cut frequency 1/min ≤ 200
Power Supply Cutter connector of the printer
!
Attention!
The minimum cut length is depending on the media, in particular its
adhesive characteristics.
Perform preliminary tests. Test the media too, if the media is
veryhard,veryexibleorverythin.
72 Mounting
2.1 Removing the Tear-off Plate
Before mounting the cutter the tear-off plate mounted on the printer must be
removed.
2
1
3
2
3
Figure 1 Removing the tear-off plate
Fold down the tear-off plate (1), pull the axles (2) of the tear-off plate out of
the holders (3) and remove the tear-off plate.
8 8
2.2 Mounting the Cutter
1
2
34
4
3
5
Figure 2 Mounting the cutter
1. Put snap arm (2) of the cutter (5) into the guide (1).
2. Push the axles (3) into the holders (4).
3. Fold up cutter (5) so that it snaps in on the printer.
2 Mounting
93 Operation
3.1 Loading Material
Fold down the cutter.
Insert labels for tear-off mode Operator's manual of the printer.
Place the media strip between the printhead and the drive roller, so that
the front edge of the strip reaches through the cutter.
21
Figure 3 Guiding the labels into the cutter
Guide the labels (2) into the slot (1) and fold up the cutter.
Insert ribbon Operator's manual of the printer.
3.2 Reference to the Programming
Activate the cut mode in the software.
In direct programming use the "C" command.
Programming Manual of the printer.
Congure the cut parameters 4. Printer Conguration
i
Note!
The cut parameters are only accessible with cutter installed.
10 103 Operation
3.3 Standard Operation
Switch on the printer.
The cutter performs a synchronization action.
i
Note!
To operate the cutter with continuous material in the printer menu
Setup ->Labels ->Label sensor the setting Continuous media has to be
selected. Otherwise no synchronization cut is carried out.
Press . For synchronization the media will be moved forward and
cut off.
That synchronization is not necessary when the printhead was not opened
between print jobs, even if the printer was powered off between print jobs.
Send a print job.
All labels in the job will be printed without stopping and be cut as chosen in
the software : after each label, after a specic quantity of labels, or at the
end of a print job.
i
Note!
Between the print jobs a direct cut can be released by pressing
on the control panel.
3.4 Cutting on Demand
In the "Cut on Demand" mode the print job will be split into steps, which can
be released separately.
Choose Printing > Print on demand = On.
4. Printer Conguration.
Send a print job.
Press .
The rst label will be printed and cut.
Press again to print and cut the next label.
Altri manuali per EOS2
1
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali CAB Taglierina
