cable matters 103082 Manuale utente
www.cablematters.com
User Manual
18Gbps Audio/Video Extender over Cat 6
Model/Modèle/Modell/Modello/
Modelo/型番
103082
2
www.cablematters.com
18Gbps Audio/Video Extender over Cat 6
English……………………………………...…….….… 1
Français……………………………………...…….……9
Deutsch ………………………………………….……. 17
Español……………………………………..….….…… 25
Italiano……………………………………...……..…… 33
日本語…………………………………………………….41
1
www.cablematters.com
18Gbps Audio/Video Extender over Cat 6
www.cablematters.com
1. INTRODUCTION
1.1 Introduction
Thank you for your purchase from Cable Matters® Inc., the ‘Reliable Connectivity’
company. This User Manual provides an overview of the features and installation
of the
18Gbps Audio/Video Extender over Cat 6
with 4K@60Hz and HDR color support
Please read these instructions carefully before connecting, operating or configur-
ing this product. Please keep this manual for future reference.
Contact [email protected] for questions or product support.
1.2 Copyright and Trademarks
Cable Matters is a registered trademark or trademark of Cable Matters Inc. All
rights reserved. All other trademarks are the property of their respective owners.
Dolby, Dolby Audio and the double-D symbol are trademarks of Dolby Laborato-
ries.
The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo
are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
1.3 FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: 1) This device must not cause harmful interference, and
2) this device must accept any interference received, including interference that
may cause undesired operation.
2. PRODUCT OVERVIEW
2.1 Package Contents
Please check that the following items are contained in the package:
1x Audio/Video Extender
2x IR Cables (Tx and Rx)
4x Mounting Brackets with screws
2x HDMI® Cables
2x AC Power Adapters
1x User Manual
2
www.cablematters.com
18Gbps Audio/Video Extender over Cat 6
2.2 Product Description
The Cable Matters 18Gbps Audio/Video Extender provides the ideal solution for
connecting a remote display with 4K 60Hz up to 200 feet. Extend the signal from
a computer, video streamer, Blu-ray player or set-top box to a display with HDMI.
An optional local display can mirror the video sent to the remote display. Control
the HDMI source at the far end with an IR remote.
2.3 Product Features
• Extend HDMI signals over Cat6 Ethernet. Supports 4K 60Hz up to 200 feet.
• Support for a local display to mirror the output of the remote display
• Use a Cat 6 cable instead of a long and heavy HDMI cable
• 18Gbps bandwidth supports 4K@60Hz video resolution, HDR and YCbCr
4:4:4 color depth
• HDCP 2.2 and HDCP 1.4 support for viewing protected content
• Copy the local or remote display EDID info to the source HDMI device with
a switch
• LCPM, Dolby TrueHD, and DTS HD-Master Audio support
• Rugged metal housing construction reduces EMI electromagnetic noise
• Screw-on locking power cords prevents an accidental disconnection of the
power
• Surface-mountable with the included brackets and screws
• 2-Pack of 4K-rated HDMI cables included
IR-T
AC
Adapter
IR-R
Remote
Display
Local
Display
Source
Remote
Cat 6 Cable
Up to 200 feet
HDMI
Source
AC
Adapter
3
www.cablematters.com
18Gbps Audio/Video Extender over Cat 6
3. CONNECTION AND OPERATION
3.1 Installation Checklist
Installation with a surge protector is recommended to protect the equipment
Check for nearby AC outlets for the power adapters
Directly connect to a Cat 6 cable, do not use with an active hub, network switch or
router
Cat 6 cable is recommended for 4K 60Hz up to 200 feet
Cat 5e cable reduces the connection distance and is not recommended for 4K video
Use shielded Cat 6 cable in a noisy area with EMI/RFI electromagnetic interference
IR cables require line-of-sight with the source equipment and an IR remote
Power-off all source and display equipment before connecting
Recommended HDMI cable distance In/Out: 15/15ft (4K) and 25/25ft (HD)
4K HDR displays require 4K-rated HDMI 2.0 cables (2 are included)
Test the Extender and cables before installing in a permanent location
3.2 Transmitter Panel Connections
1) Video IN: Connect to HDMI video source
2) Video Local: Connect a local display with HDMI
3) DC 12V: Threaded locking barrel port for power adapter
1) UPDATE: Micro-USB port for firmware update (if needed)
2) EDID: Switch to configure EDID settings
3) IR-T: 3.5mm port for IR blaster cord
4) CAT 6 OUT: RJ45 port for Cat 6 cable
1 32 4
1 2 3
4
www.cablematters.com
18Gbps Audio/Video Extender over Cat 6
3.3 Receiver Panel Connections
1) Video OUT: Connect to the remote extended display with HDMI
2) DC 12V: Threaded locking barrel port for power adapter
1.UPDATE: Micro-USB port for firmware update (if needed)
2.IR-R: 3.5mm port for IR receiver cord
3.CAT 6 IN: RJ45 port for Cat 6 cable
3.4 Connection Instructions
1) Power off all the source equipment and output displays
2) Connect the AC power adapters to the Transceiver and Receiver and secure the locking
ring
3) Connect the HDMI cables to the Video IN, Video OUT and Video LOCAL (optional)
4) Connect the IR transmitter and receiver cables (Page 5)
5) Plug the Transmitter and Receiver adapters into an AC outlet (look for a green LED)
6) Power on all the equipment and check for a video signal on the extended remote display
7) Select an EDID Mode (Page 5) if there is no video signal
Note:
Test all the equipment and cables before installing permanently
1 2 3
1 2
5
www.cablematters.com
18Gbps Audio/Video Extender over Cat 6
3.5 EDID Settings
Loc: - Copies the EDID information of the local display (if connected) and trans-
mits it to the HDMI source equipment. The source equipment will send it to the
extended display.
Ext: - Copies the EDID information of the extended display and transmits it to
the HDMI source equipment. The source equipment will send it to the local
display (if connected).
EDID Definition: Extended Display Identification Data is information provided by
a digital display to video source equipment such as a computer or video stream-
ing box.
Note: Set the EDID for the display with the lowest video resolution setting. Loc
for Video OUT on the Transmitter or Ext for Video OUT on the Receiver.
3.6 IR Remote Control
IR Transmitter (Blaster) Cable IR Receiver Cable
IR Transmitter Cable: Connect to the IR-T port on the Transmitter box. Requires
line-of-sight with the HDMI source equipment IR window. Tip: Shine a light on
the source box to reveal the IR window, if it is not labeled. Source equipment
should be within 5 feet of the IR-T bulb. (Check your HDMI source equipment
documentation).
IR Receiver Cable: Connect to the IR-R port on the Receiver box. Requires line-
of-sight with the IR remote. IR Remote should operate within 20 feet of IR-R
cable bulb.
Note: RF and Bluetooth remotes are not compatible.
6
www.cablematters.com
18Gbps Audio/Video Extender over Cat 6
3.7 Troubleshooting Notes
• Check that both the Transmitter and Receiver have power. The green LED
on the Cat 6 port should be lit.
• Check that all cables are connected to the correct input and output ports.
Secure the power cable with the locking ring.
• Directly connect the HDMI source equipment to each display to test for
compatibility.
• Test the Cat 6 cable with a network tester.
• Try both EDID settings, test with only 1 display (local and extended).
• Test with a different display for compatibility issues.
• Check that the correct video input source and output display is selected.
• Check the audio output settings from the source device or computer.
• Test each HDMI cable by connecting it with other equipment.
• Recommended maximum total HDMI cable distance In/Out is 15/15ft (4K)
and 25/25ft (HD).
• Connecting an HDMI cable with a coupler or wall plate may degrade the
signal transmission.
• Place the Extender away from fluorescent lighting or equipment that gener-
ates electrical noise.
• A ‘Not Supported’ error message may indicate that the connected equip-
ment does not support HDCP (or more than 2 outputs) for viewing content-
protected video.
• Check that the IR window on the source equipment is not blocked. The IR
cables require line-of-sight. Test at a closer range, some IR remotes trans-
mit a weaker signal.
• Wait 10 seconds for a handshake signal when connecting a computer.
• Plug and re-plug the HDMI cable.
• Reboot the video source and output displays.
Contact support@cablematters.com with any questions.
7
www.cablematters.com
18Gbps Audio/Video Extender over Cat 6
4. TECHNICAL SPECIFICATIONS Model 103082
Extender Ports (Transmitter and Receiver)
HDMI Input 1x HDMI Female
HDMI Output 2x HDMI Female
IR Ports 2x TRS 3.5mm Female
Update 2x Micro-USB Female
Power 2x DC 12V with threaded ring
Audio/Video Compatibility
HDMI Compatibility HDMI 2.0 and below
HDCP Compatibility HDCP 2.2/1.4
Video Resolution Up to 4Kx2K@50/60Hz
Color Spaces RGB, YCbCr 4:4:4, YCbCr 4:2:2 , YCbCr
4:2:0
Color Depth 8-bit, 10-bit, 12-bit
HDMI Audio Formats LPCM, Dolby, DTS 5.1, Dolby TrueHD,
DTS, HD
Mechanical
Extender Housing (T&R)(LxWxH) 4.0 x 2.8 x 0.6 Inches / 10.9
Ounces
Power Supply Input:100-240VAC,
50/60Hz, Output: DC 12V/1A
Operating Temperature 32F - 140F
Miscellaneous
Regulatory Compliance C E, FCC, RoHS
Warranty Limited One-Year
8
www.cablematters.com
18Gbps Audio/Video Extender over Cat 6
5. Warranty and Support
5.1 Customer Support and Contact Information
Cable Matters offers lifetime technical support as an integral part of
our commitment to provide industry leading solutions.
Email us with any questions at support@cablematters.com.
5.2 Warranty Information
This product is backed by a limited one-year warranty. In addition,
Cable Matters warrants its products against defects in materials and
workmanship for the periods noted, following the initial date of pur-
chase. During this period, the products may be returned for repair, or
replaced with equivalent products at our discretion. The warranty
covers parts and labor costs only. Cable Matters does not warrant its
products from defects or damages arising from misuse, abuse, altera-
tion, or normal wear and tear.
5.3 Limitation of Liability
In no event shall Cable Matters Inc. (including their officers, directors,
employees or agents) be liable for any damages (whether direct or
indirect, special, punitive, incidental, consequential, or otherwise), loss
of profits, loss of business, loss of data, or any pecuniary loss, arising
out of, or related to the use of this product exceeding the actual price
paid for the product (as allowed by state law).
Cable Matters® is a registered trademark or trademark of Cable Mat-
ters Inc. All rights reserved.
Indice
Lingue:
Altri manuali cable matters Estensione
cable matters
cable matters 103095 Manuale utente
cable matters
cable matters 103078 Manuale utente
cable matters
cable matters 103002R Manuale utente
cable matters
cable matters 103093 Manuale utente
cable matters
cable matters 103079 Manuale utente
cable matters
cable matters 103004 Manuale utente
cable matters
cable matters 103091 Manuale utente
