CADDX CA-CAR25IP/4 Istruzioni per il montaggio
Use Manual For IP LPR Camera
Product Introduction
Thank you for using the IP LPR Camera, which plate machine low light Sony CMOS,
newest ISP, high speed MCU, The day and night can clearly capture the front and rear of the
vehicle speed 150KM / h below grade. Built-in 1.8-inch LCD screen, Support both English
and Chinese, Support SD card, maximum 64G , Support external trigger grab, Support
remote monitoring, Mobile APP: CAMHI, Machine built ONVIF / GB28181 protocol,
compatible with Hikvision, Dahua, Jufeng, in peacekeeping and other mainstream NVR
1. Technical specification
Model
CA-CAR25IP/ 4
Image Sensor
1/2.8” 2Megapixel progressive scan Sony Sensor
Max. White LEDs Length
6pcs white LEDS array/30m
video resolution
first stream: 1080P(1920*1080) and 720P(1280*720) optional
Focal Length
25mm
SD Card
maximum 64G
Special function control board
Function control panel（With LCD ）
Mode/Speed/HSBLC/ LED light/ WDR / HLC four files/CDS Start/ language
can be adjusted
Power Supply
DC12V/2a
Power Consumption
<11.5W (with IR on, motorized lens working)
Working Environment
-30°C~+60°C, Less than 95% RH
Ingress Protection
IP66
Dimensions
370mm × 145mm× 115mm
Weight
2.5kg
statement:
1.The contents of the manual may be described with a certain product that you are now using
subtle differences , a problem cannot be solved if you use this manual, please contact our
technical support department or product vendor.
2.This manual will be updated from time to time, the company has the right without prior
notice.
2: Internal structure
3.Installation guide
3.1:Installation of parking lots and roads, please refer to the following
illustration
3.2:The camera should be installed as the front body is tilted downwards, and the rear part is
upward, so as to effectively avoid zhe car's lights to reach the CDS which is at the end of the
camera, Otherwise, once the CDS effected by improper lights, it will lead zhe camera's LEDs
switch on and off continuously
4 Adjustment guide
4.1
Turn the camera tail buckle counterclockwise and open the camera cover. Before
you operate, read the camera's internal instructions panel carefully.
4.2 speed setting effect diagrams is as follows, please refer to
Low speed setting Right speed setting
4.3environment Brightness setting effect chart as follows, please refer to
Too high ambient brightness settings Right ambient brightness settings
4.4:lights results refer to the brightness setting. Is shown below
Light brightness is too bright Right Light brightness
4.5brightness setting renderings below, please refer to
WDR effect mode is set to a low Wide dynamic setting to Medium mode effect
4.6 Strong light suppression setting effect chart is as follows, please refer to
Strong light suppression is not turned Right strong light suppression
on or the level setting is too low
4.7 Default Parameters
Mode: Parking Speed:30KM/h Scene bri: medium LED Light: 5
HSBLC: medium WDR: medium CDS S tart:5 language:
English
5: Camera IP Modification
5.1Modify using the search tool
5.1.1 Please install our search tool, after installation generates shortcut icon on the
desktop as follows:
4.1.2 Double-click the icon → click Next search tool, as shown below:
4.1.3 in the box below the red line as input in the new IP, to the next point, waiting for
the operation, click finish
Indice
Altri manuali CADDX Telecamera di sicurezza
