Calculated Industries ConcreteCalc Manuale utente
For Today’s Concrete Professional
User’s Guide
C
ONSTRUCTION
M
ASTER
®
M–R/C
Tape
C
ONCRETE
C
ALC
™
CALCULATED INDUSTRIES
®
AC
+
/
–
π
Area
Wt/Vol
Ft-In
M–
Per
1/
x
xAreaArc
x
2
Size
2
÷
M+
8
3
0
456
79
Rcl
%•
1
=
+
+
On/C
–
Off
Conv
Inch
Feet
/
Yds
Cu Sq
Width Vol
Length
mm
√__
Sq–Up
Stair
Weight
m
Block
Circ
Height
Drop Ftg
FEET INCH
CONCRETECALC™
Introducing ConcreteCalc . . . . . . . . . . .3
Key Definitions . . . . . . . . . . . . . . . . . . .4
Operating Basics . . . . . . . . . . . . . . . .15
Linear Dimensions . . . . . . . . . . .15
Square and Cubic Dimensions . .16
Dimension Conversions . . . . . . .17
Math Operations . . . . . . . . . . . .20
Memory Operation . . . . . . . . . . .23
Fractional Settings . . . . . . . . . . .25
Paperless Tape Function . . . . . . .27
Using the ConcreteCalc . . . . . . . . . . . .29
Linear Division . . . . . . . . . . . . . .29
Linear Addition . . . . . . . . . . . . .31
Circle Calculations . . . . . . . . . . .32
Area Calculations . . . . . . . . . . . .33
Volume Calculations . . . . . . . . . .34
Square-up Concrete . . . . . . . . . .41
Blocks, Bricks, Walls & Footings .42
Computing Drop . . . . . . . . . . . .48
Stair Problems (Risers/Treads) . .50
Appendix A . . . . . . . . . . . . . . . . . . . .54
Accuracy/Display . . . . . . . . . . . .54
Error . . . . . . . . . . . . . . . . . . . . .54
Auto-Range . . . . . . . . . . . . . . . .54
Battery & Auto Shut-Off . . . . . . .55
Full Reset/All Clear . . . . . . . . . . .55
Default Settings . . . . . . . . . . . . .55
Surface Area and Volume Formulas .56
Area Formulas . . . . . . . . . . . . . .57
TABLE OF CONTENTS
2– ConcreteCalc™
Designed for today’s concrete profes-
sional, the all-new ConcreteCalc™ adds
even more power to the already pow-
erful Construction Master line-up. Like
earlier models, this calculator is so sim-
ple to use, even the novice user can
easily solve dimension-related prob-
lems. Features include:
wwSolve Dimensional Math with Ease
wwInstant Dimensional Conversions
wwEnglish/Metric Conversions
wwWeight/Volume Conversions
wwRectangular Area/Volume Calculations
wwInstant Block Quantity Solutions
wwInstant Footing Volume Calculations
wwInstant Square-Up (Diagonal) Solutions
wwDrop Distance Calculations
wwInstant Circular Area and Perimeter
wwInstant Arc Length Calculations
wwCalculate Stair Risers and Treads
wwMaterial Estimations
wwPaperless Tape
INTRODUCING
CONCRETECALC™
User’s Guide – 3
Basic Functions
[+] [–] [x] [÷] [=]
Arithmetic Operation Keys —Used to
perform arithmetic functions.
[%]
Percent — Four-function percent key.
[0] – [9] and [ • ]
Numeric Keys —Used to key numeric
values.
[Off]
Power Off — Turns all power off. Resets
the display and all non-permanent reg-
isters.
[On/C]
Power On/Clear — Turns on power.
Pressing once clears the last entry and
the display. Pressing twice in succes-
sion clears all temporary registers.
[Conv]
Convert —Used with the dimensional
keys to convert between dimensions.
Dimensions can only be converted with-
in the same convention (i.e., linear,
square or cubic). Also used to access spe-
cial functions when used in combination
with other keys as defined herein.
KEY DEFINITIONS
4– ConcreteCalc™
[ ]
Square Root —Used to find the square
root of a number.
Note: Attempts to find
the square root of a linear or volume
dimension will cause an “Error”.
[Conv] [ ]
x2 — Finds the square of the displayed
value.
Note: Attempts to find the square of
an area or volume dimension will cause an
“Error”
.
[M+]
Memory Add —Adds the displayed num-
ber to the value stored within the semi-
permanent Memory.
[Conv] [M+]
Memory Minus —Subtracts the dis-
played value from Memory.
[Rcl]
Recall —Recalls values stored in any
register. [Rcl] [M+] displays the value in
Memory.
[Rcl] [Rcl]
Memory Display/Clear —Displays the
value in Memory and clears the register.
[Conv] [Rcl]
Memory Clear —Clears the Memory
without changing the current display.
User’s Guide – 5
Dimension Keys
[Yds]
Yards —This is an entry and conver-
sion key. The entry can be a whole
number or a decimal number. Used with
the [Conv] key converts any other dis-
played dimensioned number to yards.
[Feet]
This is an entry and conversion key.
The entry can be a whole number or
decimal number. This key can also be
used in conjunction with the [Inch] and
[/] keys for entering values in Feet-
Inch format. For example, 6 feet 9-1/2
inches is entered as follows:
6 [Feet] 9 [Inch] 1 [/] 2
Repeated presses of this key during
conversions will toggle between Feet-
Inch and Decimal Feet formats.
[Inch]
This is an entry and conversion key.
The entry can be in whole or decimal
numbers. This key can also be used in
conjunction with the [/] key for enter-
ing values in Fractional Inch format.
Repeated presses of this key during
conversions will toggle between Fractional
Inch and Decimal Inch formats.
6– ConcreteCalc™
[/]
Fraction Bar —This key is used to
enter fractions. Fractions can be
entered as proper (1 or less — 1/2, 1/8,
1/16) or improper (greater than 1 —
3/2, 65/64). For example, to enter 1/2,
the key sequence would be: 1 [/] 2. If
the denominator (the bottom number)
is not entered, then the set fractional
level (1/16, 1/2, etc.) is used. [Rcl] [/]
displays the current fractional setting.
[Cu]
Cubic —This key is used with a dimen-
sion key (feet, inches, yards, meters,
etc.) to identify a value as being a vol-
ume. Example: 5 [Cu] [Yds].
[Sq]
Square —This key is used with a
dimension key (feet, inches, yards,
meters, etc.) to identify a value as being
an area. Example: 10 [Sq] [Feet].
[m]
Meters —This is an entry and conver-
sion key used to enter decimal meters
or to convert decimal meters from some
other dimensional format (when used
in conjunction with the [Conv] key).
User’s Guide – 7
[mm]
Millimeters —This is an entry and con-
version key used to enter or to convert
to decimal millimeters (when used in
conjunction with the [Conv] key).
[Weight]
This key is used to convert a dimen-
sioned cubic value or volume, to a
weight value using the [Conv] key and
the stored Weight per Volume (see
below). For example, 5 [Cu] [Yds]
[Conv] [Weight] equals 7.5 tons, or 10
[Weight] (tons) [Conv] [Cu] [Yds] equals
6.666667 cubic yards. Repeated press-
es of this key, after a cubic entry or
conversion, will toggle between tons,
pounds and kilograms.
[Conv] [%]
Weight per Volume—Used to set the
Weight per Volume. Can be programmed
as Tons per Cubic Yard, Pounds per
Cubic Yard, or Kilograms per Cubic Meter.
Default is 1.5 Tons/Cu. Yd. To set a dif-
ferent weight per volume, for example, 2
Tons/Cu. Yd, press 2 [Conv] [%]. Value
will be permanently stored. To recall
stored value, press [Rcl] [%].
8– ConcreteCalc™
Area/Volume Keys
[Length]
Enters the value for Length in dimen-
sion problems (e.g., for calculating area
or volume).
Note: This key is also used to
enter the length for “Square-ups” and the
“Run” for stair problems.
[Width]
Enters the value for Width in dimension
problems (e.g., calculating area or vol-
ume).
Note: This key is also used to enter
the width for “Square-ups.”
[Height]
Enters the value for Height in dimen-
sion problems (e.g., for calculating vol-
ume).
Note: This key is also used to enter
the “Rise” for stair problems.
[Vol]
Volume —Computes the volume
(Length x Width x Height) in Cubic
Yards based on entered Length, Width
and Height values. A second press will
display the area (in square feet) based
on entered Length and Width. Successive
presses will toggle the display between
the calculated area and volume.
[Conv] [Vol]
Area —Computes the area in Square
Feet based on entered Length and Width.
User’s Guide – 9
Square-Up & Drop Keys
[Sq-Up]
Square-up —Enters or computes the
“Square-Up” (or Diagonal) length based
on entered Length and Width values.
[Drop]
Computes the total drop (or fall) over
an entered Length, given an entered
percentage drop or inch drop per foot
value. Successive presses will act as a
“constant add,” for displaying succes-
sive drops.
Block/Footing Keys
[Block]
Number of Blocks —Computes the num-
ber of blocks or bricks needed after enter-
ing a wall area, or values entered in
Length and Height.
[Conv] [Block]
Block Size —Used to permanently set
the size of a single block or brick. The
default size is 128 square inches for an
8” x 16” block. To recall the stored
block area, press [Rcl] [Block].
[Ftg]
Footing —Used to compute concrete
volume of footings, walls, curbs, etc.
10 – ConcreteCalc™
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Calculated Industries Calcolatrice
Calculated Industries
Calculated Industries KitchenCalc Pro Manuale utente
Calculated Industries
Calculated Industries CONVERSIONCALC PLUS Manuale utente
Calculated Industries
Calculated Industries Frame Master II Manuale utente
Calculated Industries
Calculated Industries 4054 Manuale utente
Calculated Industries
Calculated Industries ConstructionMaster HeavyCalc 4320 Manuale utente
Calculated Industries
Calculated Industries 3423 Manuale utente
Calculated Industries
Calculated Industries 3430 Manuale utente
Calculated Industries
Calculated Industries KitchenCalc 8300 Manuale utente
Calculated Industries
Calculated Industries Pocker Real Estate Master 3400 Manuale utente
Calculated Industries
Calculated Industries 4325 Manuale utente
Calculated Industries
Calculated Industries Construction Master 5 4050 Manuale utente
Calculated Industries
Calculated Industries 9130 Manuale utente
Calculated Industries
Calculated Industries 3416 Manuale utente
Calculated Industries
Calculated Industries 6260 Manuale utente
Calculated Industries
Calculated Industries Home ProjectCalc Manuale utente
Calculated Industries
Calculated Industries PIPE TRADES PRO 4095 Manuale utente
Calculated Industries
Calculated Industries 9430 Manuale utente
Calculated Industries
Calculated Industries 8515 Manuale utente
Calculated Industries
Calculated Industries PROJECTCALC CLASSIC 8503 Manuale utente
Calculated Industries
Calculated Industries 4030 Manuale utente
