Calf-Tel CH-3220B-1 Manuale di programmazione
Revised October 2021
1
Hampel, W194 N11551 McCormick Drive, Germantown, WI 53022
Phone: 262-255-4540 Fax:262-255-9731
CH-3220B-1 & CH-3220-3L
Hutch Mount Bottle Holder Kit
Assembly Instructions for Installation
Calf-Tel 2 Qt. Hutch Mount Bottle Holder Kit Bill of Material:
Item
Item Number
Description
Qty
1
CH-3002-1
2 Qt. Bottle Holder Wire Cradle
1
2
CH-3223-1
Plastic Face Plate
1
3
CH-9050-1
Hardware Required for Assembly
1
Calf-Tel 3 Qt. Hutch Mount Bottle Holder Kit Bill of Material:
Item
Item Number
Description
Qty
1
CH-3004
3 Qt. Bottle Holder Wire Cradle
1
2
CH-3223-1
Plastic Face Plate
1
3
CH-9050-1
Hardware Required for Assembly
1
Installation Instructions:
Step 1: Cut Bottle Holder Opening: Using
the template on page 2, cut opening for bottle
holder and drill holes for bottle holder wires.
Step 2: Attach Bottle Holder Wire to
Plastic Face Plate: Insert bottle holder wire
through holes in bottle holder. Align plastic
face plate with opening in hutch and insert
bottle holder wire into holes on hutch.
Step 3: Secure Bottle Holder and Face
Plate to Hutch: Fasten bottle holder and
face plate to hutch with 1 screw, 1 washer
and plastic wing nut.
Tools Needed:
1. Router, Roto-zip or Jig Saw
2. Screw Driver/Drill
Revised October 2021
2
Hampel, W194 N11551 McCormick Drive, Germantown, WI 53022
Phone: 262-255-4540 Fax:262-255-9731
Bottle Holder Hutch Mount Template
Revised October 2021
3
Hampel, W194 N11551 McCormick Drive, Germantown, WI 53022
Phone: 262-255-4540 Fax:262-255-9731
CH-9777-1 & CH-9778-3L
Fence Mount Bottle Holder Kit
Assembly Instructions for Installation
Calf-Tel 2 Qt. Fence Mount Bottle Holder Kit Bill of Material:
Item
Item Number
Description
Qty
1
CH-3002-1
2 Qt. Bottle Holder Wire Cradle
1
2
CH-3223-1
Plastic Face Plate
1
3
CH-3003-2
U-Shaped Wire Support Bracket
1
4
PH-5020
Wing Nut
1
Calf-Tel 3/4 Qt. Fence Mount Bottle Holder Kit Bill of Material:
Item
Item Number
Description
Qty
1
CH-3004
Bottle Holder Wire Cradle
1
2
CH-3223-1
Plastic Face Plate
1
3
CH-3003-2
U-Shaped Wire Support Bracket
1
4
PH-5020
Wing Nut
1
Installation Instructions:
Step 1: Attach Bottle Holder
Wire to Plastic Face Plate:
Insert wire through holes in plastic
face plate.
Step 2: Assemble to Fence: Align face
plate to opening in fence. Insert bottle
holder wires through fence, into u-shaped
wire support bracket holes. Threaded
stud at bottom of u-shaped wire support
bracket should be inserted through the
lower hole on the face plate.
Step 3: Fasten to Fence: Tighten wing
nut onto stud at base of u-shaped wire
support bracket.
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Calf-Tel Rack e supporto
