CALLSWITCH SIP-T48G Manuale utente
https://callswitch.net
Customizing Your Phone
Voice Message
Contact Directory
Volume Adjustment
To add a contact:
To edit a contact:
Call History
Note: You can add contacts from the call history easily. For more information, refer to Call History above.
To delete a contact:
To listen to voice messages (Ensure voice mail code is already configured on the phone) :
Tap Send to place a call.
Tap Add to add the entry to the local directory.
Press during a call to adjust the receiver volume of the handset/speakerphone/
headset.
Press when the phone is idle to adjust the ringer volume.
Tap Delete to delete the entry from the list.
Message waiting indicator on the idle screen indicates that one or more voice messages are
waiting at the message center. The power indicator LED slow flashes red.
1. Tap and then tap the Connect soft key , or press .
2. Follow the voice prompts to listen to your voice messages.
1. When the phone is idle, tap , and then tap the desired call list on the left.
3. Tap a after the desired entry , anda then you can do the following:
1. When the phone is idle, tap , and then tap the desired group on the left.
2. Tap Add to add a contact.
1. When the phone is idle, tap , and then tap the desired group on the left.
1. When the phone is idle, tap , and then tap the desired group on the left.
3. Tap the OK soft key when the touch screen prompts “Delete the selected contact?”.
4. Tap the Save soft key to accept the change.
4. Tap the Save soft key to accept the change.
3. Enter a unique contact name in the Name field and contact numbers in the corresponding fields.
2. Tap after the desired contact.
2. Tap a after the desired contact , and then tap Delete .
For more information, refer to:
http://www.support.callswitch.com Applies to firmware version 72 or later.
Customizing Your Phone
Quick Reference Guide
Tap Blacklist to add the entry to the blacklist.
3. Edit the contact information.
SIP-T48G
Ultra-elegant Gigabit IP Phone
Note: You can split the conference call into two individual calls by tapping the Split soft key.
4. Tap the End Call soft key to disconnect all parties.
2. Enter the number of the second party, and then tap the Send soft key.
3. Tap the Conference soft key again when the second party answers.
All parties are now joined in the conference.
Tap Edit to edit the phone number of the entry before placing a call.
2. Tap or , or press or to scroll to the desired page.
Copyright ©2016 CALLSWITCH.NET.
https://callswitch.net
SIP-T48G Quick Reference Guide
Basic Call Features
Placing a Call
Answering a Call
Ending a Call
Using the handset:
Using the speakerphone:
Using the headset:
Using the handset:
Using the speakerphone:
Using the headset:
Using the handset:
1. With the handset on-hook, press .
1. Pick up the handset.
2. Enter the number, and then tap the
Send
soft key.
1. With the headset connected, press to activate the headset mode.
2. Enter the number, and then tap the
Send
soft key.
Note:
During a call, you can alternate between headset, hands-free speakerphone and handset modes by
pressing the
HEADSET
key or the
Speakerphone
key or picking up the handset. Headset mode requires a
headset connected.
Note:
You can ignore an incoming call by tapping the
Reject
soft key.
2. Enter the number2. Enter the number, and then tap the
Send
soft key.
Pick up the handset.
Press .
Hang up the handset or tap the
End Call
soft key.
Press .
Call Conference
Call Forward
Always Forward----
Incoming calls are forwared unconditionally.
Busy Forward----
Incoming calls are forwarded when the phone is busy.
No Answer Forward----
Incoming calls are forwarded if not answered after a period of time.
1. When the phone is idle, tap >
Call Features
>
Call Forward
.
2. Select the desired forward type:
3. Enter the number you want to forward to. For
No Answer Forward
, tap the pull-down list of
After
Ring Time
, and then tap the desired ring time to wait before forwarding.
4. Tap the
Save
soft key to accept the change.
1. T
ap the
Conference
soft key during an active call. The call is placed on hold.
If there is more than one call on hold, tap the call you want to resume, and then
press or tap the
Resume
soft key.
Semi-Attended Transfer
Attended Transfer
To enable call forward:
Blind Transfer
Call Transfer
You can transfer a call in the following ways:
1. Press or tap the
Transfer
soft key during an active call. The call is placed on hold.
1. Press or tap the
Transfer
soft key during an active call. The call is placed on hold.
1. Press or tap the
Transfer
soft key during an active call. The call is placed on hold.
2. Enter the number you want to transfer to, and then press .
3. Press or tap the
Transfer
soft key when the second party answers.
2. Enter the number you want to transfer to, and then press .
3. Press or tap the
Transfer
soft key when you hear the ring-back tone.
3. Press or tap the
Transfer
soft key.
2. Enter the number you want to transfer to.
Call Mute and Un-mute
Call Hold and Resume
To place a call on hold:
To resume the call, do one of the following:
Press to mute the microphone during a call.
Press again to un-mute the call.
If there is only one call on hold, press or tap the
Resume
soft key.
Press or tap the
Hold
soft key during an active call.
Using Your Phone
Navigating the Touch Screen
To enter the main menu, tap .
To turn pages, tap or on the touch screen.
Entering and Updating Data
Press twice when the phone is idle to dial out the last dialed number.
To enter data:
1. Tap the field you want to edit.
2. Tap the
IME
soft key to switch input modes.
3. Enter data using the keypad.
4. Tap the
Save
soft key.
To select a field option:
Tap the field name, and then tap the field’s highlighted box. From the pull-down list,
tap the desired option.
Using the speakerphone:
Using the headset:
Press or tap the
End Call
soft key.
Tap the
End Call
soft key.
Redial
Press to enter the
Placed
call list, and then tap the desired entry.
To select a soft key, tap the soft key.
To select an item, tap the item.
To scroll through values in a pull-down list, press or .
T
o return to the idle screen, tap .
To go back to the previous menu, tap .
Altri manuali CALLSWITCH Telefono IP
