Cambridge Audio C10974 Manuale utente

EDGE W

Manual Generated: 20/11/2023 - 17:28

Table of Contents

EDGE W 3 ........................................................................................................................................................................................................................

Introduction 4 ................................................................................................................................................................................................................

What’s included with the EDGE W? 5 ........................................................................................................................................................................

Front panel 6 .................................................................................................................................................................................................................

Rear panel connections 7 ............................................................................................................................................................................................

Getting connected 9 .....................................................................................................................................................................................................

Power syncing 13 ..........................................................................................................................................................................................................

Protection circuitry 14 ..................................................................................................................................................................................................

Troubleshooting 15 .......................................................................................................................................................................................................

Technical speciﬁcations 16 ..........................................................................................................................................................................................

Frequently Asked Questions (FAQ) 17 .......................................................................................................................................................................

EDGE W

Last updated: August 9, 2022 05:05. Revision #10013

Users Manual

Introduction

Last updated: August 9, 2022 05:04. Revision #10022

This guide is designed to make installing and using this product as easy as possible. Information in this document has been carefully checked for

accuracy at the time of printing; however, Cambridge Audio’s policy is one of continuous improvement, therefore design and speciﬁcations are

subject to change without prior notice.

mechanical, electronic or other means, in any form, without prior written permission of the manufacturer. All trademarks and registered trademarks

are the property of their respective owners.

For upcoming news on future products, software updates and exclusive oﬀers, make sure you register your product

at https://www.cambridgeaudio.com/register

What’s included with the EDGE W?

Last updated: August 9, 2022 05:05. Revision #10021

Inside the box of your EDGE W you will receive:

EDGE W Power Ampliﬁer1.

UK power cord (Depending on which country the EDGE W was purchased in)2.

EU power cord (Depending on which country the EDGE W was purchased in)

CU power cord (Depending on which country the EDGE W was purchased in)

JP power cord (Depending on which country the EDGE W was purchased in)

Link Cable3.

User Manual4.

Warranty Card5.

Welcome Letter 6.

Unboxing Card7.

Front panel

Last updated: August 9, 2022 05:05. Revision #10020

1. STANDBY/ON - Switches the unit between Standby mode (indicated by dim LED) and On (indicated by bright LED). Standby mode is a low power

mode where the power consumption is less than 0.5 Watts.

AUTO POWER DOWN (APD)

The product will automatically switch to standby mode after inactivity of 20 minutes. To enable or disable this function, use the APD switch located

on the rear of the unit.

Rear panel connections

Last updated: August 9, 2022 05:05. Revision #10019

1. VOLTAGE SELECTOR SWITCH

Note: For use by Cambridge Audio service personnel only!

2. AC POWER SOCKET

3. SPEAKER TERMINALS

Note: When using a banana plug, make sure the speaker terminals are completely tightened before inserting the plug.

Connect the wires from your left channel loudspeaker to the left positive and negative terminals and the wires from the right channel loudspeaker

to the right positive and negative terminals.

In each case, the red terminal is the positive output and the black terminal is the negative output.

Care should be taken to ensure no stray strands of wire short the speaker outputs together. Please ensure that the loudspeaker terminals have

been tightened completely to provide a good electrical connection.

It is possible for the sound quality to be aﬀected if the screw terminals are loose.

4. LOOP OUT - This output can be used for bi-amping, daisy chaining or connecting to the input of an active subwoofer.

The XLR output is balanced and the RCA output is unbalanced.

5. BALANCED/UNBALANCED SWITCH - Select depending on whether a source is connected to the balanced XLR or unbalanced RCA input.

Note: There will be no sound from the amp if the correct input isn’t selected. If a source is connected to the balanced input, for example, ensure

that the balanced switch has been selected.

6. BALANCED/UNBALANCED INPUTS - The XLR input is balanced and the RCA input is unbalanced.

7. AUTO POWER DOWN (APD) SWITCH - Switches to enable or disable the Auto Power Down function. When enabled, the ampliﬁer will

automatically switch to standby mode after inactivity of 20 minutes.

8. LINK - Refer to the 'Power syncing' section of this manual for more information.

Getting connected

Last updated: August 9, 2022 05:05. Revision #10018

LOUDSPEAKERS

Check the impedance of your speakers. You can use types with an impedance of between 4 and 8 Ohms.

The red coloured speaker terminals are positive (+) and the black speaker terminals are negative (-). Make sure the correct polarity is maintained at

each speaker connector or the sound can become weak and “phasey” with little bass.

USING BARE WIRE CONNECTIONS

Prepare the speaker cords for connection by stripping oﬀ approximately 10mm (3/8”) or less of the outer insulation. More than 10mm could cause a

short circuit. Twist the wires tightly together so there are no loose ends. Unscrew the speaker terminal, insert the speaker cable, tighten the

terminal and secure the cable.

Note: All connections are made using standard loudspeaker cable.

USING BANANA PLUGS

We recommend using Banana plugs with our units to establish a secure connection and ensure there are no loose strands of wire that may cause

unwanted noise or interference.

Once you have stripped the outer insulation of the cable and twisted the wires as indicated below, securely connect these to your banana plugs and

push the plug in as far as possible without applying excessive force.

Note: When using a banana plug, make sure the speaker terminals are completely tightened before inserting the plug.

BASIC CONNECTIONS

The analogue inputs are to be connected to the Pre-Outs of a Preampliﬁer or Integrated amp. The diagrams below show the basic connection from a

Preampliﬁer.

Unbalanced input:

Using RCA cables will enable an unbalanced analogue connection to your EDGE W.

If using RCA cables, ensure the ‘Unbalanced’ switch on your EDGE W is selected.

Balanced input:

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Cambridge Audio Amplificatore

Cambridge Audio

Cambridge Audio CXA81 Manuale utente

Cambridge Audio

Cambridge Audio Azur 640P Manuale utente

Cambridge Audio

Cambridge Audio 851D Manuale utente

Cambridge Audio

Cambridge Audio cp2 Manuale utente

Cambridge Audio

Cambridge Audio AXA25 Manuale utente

Cambridge Audio

Cambridge Audio azur 840A Manuale utente

Cambridge Audio

Cambridge Audio AZUR 651A Manuale utente

Cambridge Audio

Cambridge Audio Azur 540A V2 Manuale utente

Cambridge Audio

Cambridge Audio EDGE M Manuale utente

Cambridge Audio

Cambridge Audio Azur 840W Manuale utente

Cambridge Audio

Cambridge Audio azur 350A Manuale utente

Cambridge Audio

Cambridge Audio EDGE W Manuale utente

Cambridge Audio

Cambridge Audio AXA25 Manuale utente

Cambridge Audio

Cambridge Audio Azur 540A V2 Manuale utente

Cambridge Audio

Cambridge Audio Integrated Amplifier Azur 740A Manuale utente

Cambridge Audio

Cambridge Audio Alva Solo Manuale utente

Cambridge Audio

Cambridge Audio Edge NQ Manuale utente

Cambridge Audio

Cambridge Audio CXA61 Manuale utente

Cambridge Audio

Cambridge Audio C11026 Manuale utente

Cambridge Audio

Cambridge Audio EDGE W Manuale utente

Cambridge Audio

Cambridge Audio Azur 540A V2 Manuale utente

Cambridge Audio

Cambridge Audio Azur 540P Manuale utente

Cambridge Audio

Cambridge Audio Integrated Amplifier Azur 740A Manuale

Cambridge Audio

Cambridge Audio AXA35 Manuale utente

Manuali Amplificatore popolari di altre marche

ASTRO

ASTRO HVO V40 P Manuale utente

Marantz

Marantz SUPERSCOPE BLA-545 Istruzioni per il montaggio

NAD

NAD CI980 Manuale utente

Technics

Technics SE-CH770 Manuale utente

Harman Kardon

Harman Kardon HK6300 Manuale utente

NAD

NAD T975 Manuale utente

McIntosh

McIntosh MA6850 Manuale utente

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Manuale utente

Viatron

Viatron Autrix Manuale utente

GME

GME GA9800 Manuale utente

Atlas

Atlas CP700 Manuale utente

Roland

Roland KC-1000 Manuale utente

Pyle

Pyle PFMRA350BW Manuale utente

Advantage

Advantage S-250 Manuale utente

IRT Electronics

IRT Electronics DVA-3007 Manuale utente

Dimavery

Dimavery BA-100 Series Manuale utente

Sony

Sony XM-S400D Manuale utente

Schertler

Schertler ROY X Manuale utente