Camplex CMX-HDMIF Manuale utente
HDMI to Optical Fiber Converter
Professional Features: ST Connectors • Locking Power Supply
USER MANUAL
Go the Distance! Extend and send HDMI over 10 miles of optical ber with the Camplex
CMX-HDMIF. A complete transmitter and receiver system perfect for extending perfect
for use with HDTV, LCD monitors, digital projectors, plasma TV’s and other equipment
requiring HDMI to Fiber conversion.
The Camplex HDMI over Fiber conversion system delivers professional ST Fiber connec-
tors and a locking power supply to give you the added assurance that you’re always
connected. Complete your system with Camplex long run tactical ber cables - see
www.camplex.com for further details.
1. Box Contents
2. Installation Requirements
2.1 HDMI output device - (built-in IR extension functionality optional)
2.2 HDMI HDTV, Switcher, Splitter or Projector or similar input device with HDMI port.
2.3 Singlemode optical ber cable.
3. LED indication
3.1 Internet connection
3.2 Dual- way data transmission
3.3 100m Bandwidth
3.4 Fiber optic connection
Disclaimer
© Camplex - Div. Tower Products, Incorporated. Design and specications of this unit are
subject to change without prior notice. Pictures are for reference only. Products may dier
slightly from images shown.
1234
HDMI Extender
Receiver
HDMI Extender
Sender
DC 5V/2A Power
Adapter x 2pcs
IR Blaster and
IR Receiver
extension cables
Look for Camplex Brand long
length ber optic cables to com-
plete your transmission systems.
They feature a choice of ST, SC or
LC connectors in 1 to 12 channel
congurations. They also feature
tactical ber jackets designed for
extreme use in audio and video
production.
www.camplex.com
Important Safety Instructions:
1) Read and follow all instructions prior to use. Please keep the user manual for future
reference.
2) In order to avoid re, electric shock and product damage, please keep this product away
from water and other liquids.
3) Keep ventilation ports clear. Don’t put the product in an enclosed cabinet during oper-
ation.
4) Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including ampliers) that produce heat.
5) Do not plug & unplug devices and accessories when in use.
6) Only use attachments/accessories specied by the manufacturer.
7) Working power is 5V/2A. Please check the power adapter parameters before you
change it.
8) Refer all servicing to qualied service personnel. Servicing is required when the appa-
ratus has been damaged in any way, such as power-supply cord or plug is damaged,
liquid has been spilled or does not operate normally, or has been dropped.
9) Changes or modications to this device not expressly approved by Camplex will void all
warranties.
4. Installation / Application
4.1 Connect Extender
4.2 Connect IR module (this is optional)
Connect the IR sender to the HDMI extender sender“IR in” port;
Connect the IR receiver to the HDMI extender receiver “IR out” port;
Note:
Use the IR remote control of your HDMI source device at the receive end to operate and
control it.
5. Basic Troubleshooting
Q1: The yellow LED ickers but slowly?
A1: 1) Check the connection of extender/sender and receiver.
2) Check that the HDMI video source is outputting a signal by attaching it to a local
display.
3) Check and replace the HDMI cable to both the sender and receiver units.
Q2: The yellow LED ickers quickly but no picture outputs?
A2: 1) If input video source is an HDMI graphic card, please make sure the HDMI graph-
ic card output resolution is supported by your HDMI display.
2) Double check HDMI cable connections of both the sender and receiver.
3) Check and replace the HDMI cable to both the sender and receiver units.
4) Be certain you are using a singlemode ber optic cable.
Q3: Yellow LED doesn’t light?
A3: 1) Make sure the ber optic cable is connected correctly and securely.
2) Check the ber optic cable end. Detach, clean properly and reinsert.
3) Make sure your ber optic cable is a singlemode cable.
Q4: HDMI output display is abnormal or ickers?
A4: Press the“reset”button to go-back to default setting. Make sure your display sup-
ports the resolution of the source.
Q5: The IR remote control doesn’t work?
A5: 1) Check the connection of IR blaster and IR receiver and make sure it’s correct.
2) Make sure the IR remote control can support a 38kHz signal.
6. Technical Specications
HDMI Video Source HDMI Extender TX
(sender)
HDMI Extender RX
(receiver)
HDMI
out
HDMI
in
www.camplex.com
Power Adapter DC5V/2A (2 included)
HDMI
Parameters
DDC Signal Voltage 5Vp-p (TTL)
TMDS Bandwidth 10.2Gpbs
HDMI Input Resolution
Supported
480i@60Hz, 480p@60Hz,
576i@50Hz, 576p@50Hz,
720p@50/60Hz,
1080i@50/60Hz, 1080p@50/60Hz
HDMI Output
Resolution Supported
480p@60Hz, 576p@50Hz,
720p@50/60Hz, 1080p@50/60Hz
Fiber Wavelength 1310nm
Fiber Connection ST Connectors
Fiber Type/Distance SMF (single mode ber) / 0-20Km
Linked-Circuit Loss ≤14dB
Output Power ≥11dBm
Receive Sensitivity ≤-32dBm
IR Remote Supports 38kHz
Power
Consumption Tx: 5W / Rx: 5W
Dimensions Each Tx/Rx Unit: 5”L x 3.375”W x 0.875”H (13 x 8.5 x 2.4 cm)
Indice
Altri manuali Camplex Convertitore multimediale
