Canon MultiPASS MP360 Manuale utente

Set-Up Sheet

Thank you for purchasing the Canon MultiPASS MP370/360. To prepare your

machine for use, please follow the instructions in this Set-Up Sheet before referring to

any other documentation.

READ THIS SHEET FIRSTREAD THIS SHEET FIRST

Do not connect the USB cable until , "Connect the USB

cable."

IMPORTANT

Setup procedures Start

Setup flow

Setup procedures End

This side explains the setup procedure for use without connecting to a computer. <Check packed contents, install and adjust machine>

This side explains the setup procedure for use by connecting to a computer. <Install MP Drivers and Utility Software>

You can use the copy, photo print (MP370) functions.

You can use the print, scan functions.

Connect power

cord

Install Utility Software

Install print head

Install MP Drivers

Install ink tanks

Connect USB cable

Load print media Align print head

Unpack and install

the machine

Unpack and install the machine.

1Carefully remove all items from the box.

NOTE

• When removing the machine from the

box, take sufficient care not to drop it.

2Remove the protective material.

NOTE

•After removing the protective material,

do not lift the machine by grasping the

scan unit.

Hold the bottom side.

3Place the machine on a flat surface.

•Be sure to hold the machine by the

sides. Set nothing in front of the

machine.

4Remove all shipping tape from the

exterior of the machine.

•After removing the tape, remove the

protective sheet.

Do not grasp the

scan unit.

HT3-2142-000-V.1.0

NOTE

•In this sheet, illustrations of MP370 are shown.

•A printer cable is not included. You must purchase a USB cable (less than 16 3/8ft./5 m)

to connect your machine to a computer.

• MP370 • MP360

• Print head

• Ink tanks

BCI-24 Black

BCI-24 Color

•Power cord

•Set-Up Sheet

•User's Guide

•Setup

CD-ROM

The Setup CD-ROM contains the MP

Drivers, as well as the electronic manuals

Software Guide and Photo Application

Guide.

Please read these guides.

Check the contents.

Connect the power cord.

1Connect the power cord.

If the message <PUT IN CARTRIDGE> appears, go

to procedure 3, "Install the print head."

Approx. 15 seconds

Install the print head.

1Lift the scan unit until it locks into place.

•If a protective sheet is on the inner side of the scan unit, remove the protective sheet.

NOTE

•If you open the scan unit while the machine is turned ON, the paper output tray will

open.

Click

Lift the scan unit.

qOpen the inner cover.

2Open the inner cover. 3Raise the lock lever.

Touch only here!

Raise this securely.

Remove the protective cap

and dispose of it.

Do not touch!

5Insert the print head. 6Lower the lock lever.

Click

Lower the lock lever until it

locks into place.

4Prepare the print head.

If the paper output tray does not open, press

the Open button to open the paper output tray.

wThe print head holder moves to the center.

Install here.

2Load the print media. 3Pull out the tray extension of the

paper output tray.

Install the ink tanks.

1Prepare the ink tanks. 2Insert the ink tanks.

Remove the protective

cap and dispose of it.

Black

Do not touch!

Click

Insert the black ink

tank into the right slot.

Push it in until it

locks into place. Insert the color ink

tank into the left slot.

3Close the inner cover qand

the scan unit w.

Click

qSwing it upward into place.

wLower it into place.

Load the print media.

1Open the multi-purpose tray.

wPull up the tray

extension until it stops.

Incorrectly

installed

Correctly

installed

Rear side a

NOTE

Pull it out until it stops.

qLoad the print media with the print side face up.

wPinch and adjust the

paper guide to the

width of the stack.

Ensure the paper stack does

not exceed paper limit mark.

qOpen the tray.

Align the print head from the operation panel.

Be sure to align the position of the print head to ensure quality printing.

1Print the print head position pattern.

2Enter checkmarks in the printed patterns.

•From column A to column K on the

printout, enter checkmarks in the patterns

that have the most solid image.

3Align the print head.

•In column A on the printout, select the pattern that you checked on the printout in

step 2, then press [Set].

4Repeat step 3 for columns B to K.

wPress

[Set].

If this message

does not

appear after

closing the

scan unit, see

page 86 of the

User's Guide.

Column A

GOOD SAMPLE

BAD SAMPLE

Least solid box

Most solid box

qPress [+] or [-] to select

the pattern number of

the good sample.

wPress [Set].

Press [+] to increase the number one digit.

Press [–] to decrease the number one digit.

You have completed installation and alignment.

If you are connecting the machine to a computer for use, see , and for

instructions on installing the software.

eThe machine prints

a print head

position pattern.

Columns (A to E)

Pattern numbers

Columns (F to K)

qThis message appears.

Install the MP Drivers.

The MP Drivers must be installed on the hard disk of your computer in order to print

from or scan images to the computer. In addition to installing the MP Drivers, install

the MP Toolbox. Use the MP Toolbox to attach scanned images to e-mail and store

them.

IMPORTANT

• For detailed system requirements, see page 64 of the User's Guide.

•When installing the software in Windows 2000, you must have Service Pack 1 or

later version installed.

•When installing the software in Windows 2000, you must log on as Administrator

or have Administrator privileges.

•When installing the software in Windows XP, you must log on as Administrator

privileges.

•If you have an earlier version of the MultiPASS Suite software installed on your

computer, uninstall this version before installing the new version.

For instructions on uninstallation, see the guides for that version of MultiPASS Suite.

•On your computer, close any open software applications, including virus checkers,

in advance.

For details, see the instruction guide for each software application (or consult the

system administrator).

•If using the machine with USB 2.0 Hi-Speed mode, you must connect it to a

computer standard-equipped with a USB 2.0 Hi-Speed interface.

Turn ON your computer,

and start Windows.

Insert the Setup CD-ROM

into the CD-ROM drive.

The setup program should automatically run.If

the setup program does not automatically run,

click [My Computer], then double-click

[setup.exe] or [setup] on the Setup CD-ROM.

Click

Prepare the Setup CD-ROM (Installation preparation)

If the following screen appears:

The USB cable is connected.

Perform the following steps.

1. Disconnect the USB cable.

2. Click [Cancel].

1Install the MP Drivers. (Use when printing from PC applications or scanning images.)

Follow the on-screen

instructions to install

the software.

When the InstallShield Wizard Complete window

appears, click [Finish].

If you are prompted to restart your computer after the

installation, restart your computer.

2Install the MP Toolbox.

(Use to scan documents and send as e-mail or save as PDF files.)

Follow the on-screen instructions to install the software.

When the InstallShield Wizard Complete window

appears, click [Finish].

If you are prompted to restart your computer after the

installation, restart your computer.

3Connect the USB cable

Click

Select [Yes, I want to restart

my computer now.].

When restarting your

computer is

necessary:

Click

When restarting your

computer is not

necessary:

Click

●Outline of utility software

Easy-PhotoPrint allows you to make high-quality borderless (full page) prints easily by simply

selecting the paper type and image you recorded with your digital camera.

Easy-WebPrint allows you to print a whole web page from Microsoft Internet Explorer (version 5.5,

version 6.0 recommended) quickly and without any complicated settings.

ScanSoft OmniPage SE is an OCR (Optical Character Recognition) program which can convert the

text in books or newspaper characters into text data.

ArcSoft PhotoStudio allows you to import images from your scanner and digital camera to enhance

them in various ways, blend them together, convert their data format, or add them to an album.

The Adobe Acrobat Reader displays documents in PDF (Portable Document Format) form.

Easy-PhotoPrint /

Easy PhotoPrint Plus*

Easy-WebPrint

ScanSoft OmniPage SE

ArcSoft PhotoStudio

Adobe Acrobat Reader

Connect the USB cable.

Make sure both your machine and

computer are turned ON.

When connecting the USB cable, the

computer will automatically set

necessary information.

Please wait shortly. Click [OK] if you are

prompted to restart your computer.

Install the utility software.

Utility software also is stored on the Setup CD-ROM. You can select not to install the

utility software at this stage and install it later.

The Photo Application Guide is contained on the Setup CD-ROM. *U.S.A. only

●Install the utility software.

Connect one end of the USB cable to the computer,

the other (square shaped plug) to the machine.

Click [Install Utility

Software].

Select the software

to install.

When the InstallShield Wizard

Complete window appears, click

[Finish].**

If you are prompted to restart your computer

after the installation, restart your computer.

** This procedure varies depending on the

application software.

Click this to read

the guides stored

on the Setup

CD-ROM, such

as the Photo

Application

Guide.

Click Click

To view guides

PRINTED IN THAILAND

You now have completed installation of the software.

For details of the operations, see the User's Guide.

Canon, MultiPASS, and BCI are trademarks of Canon Inc.

All other products and brand names are registered trademarks or trademarks of their respective owners.

Specifications subject to change without notice.

In Windows 2000, the machine may not be set as [Set As Default Printer]. For details, see the Software Guide.

When installation of the MP Drivers completes, the icon appears on the desktop.You

can register your machine online by double-clicking this icon.

Altri manuali per MultiPASS MP360

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Canon Stampante tutto in uno

Canon

Canon imageRUNNER C3480 Scheda informativa del prodotto

Canon

Canon PIXMA TS5070 Guida all'installazione

Canon

Canon SmartBase MPC600F Manuale utente

Canon

Canon iR2020 Series Manuale utente

Canon

Canon PIXMA MP220 Manuale utente

Canon

Canon PIXMA MX340 Series Manuale

Canon

Canon ImageCLASS D420 Manuale utente

Canon

Canon iR3300 Series Manuale utente

Canon

Canon imageRUNNER 2545i Manuale utente

Canon

Canon C3000 - MultiPASS Color Inkjet Printer Manuale utente

Canon

Canon PIXMA MP640 Manuale utente

Canon

Canon MB2700 series Guida all'installazione

Canon

Canon 5119B001AA Istruzioni per il montaggio

Canon

Canon MX475 Guida all'installazione

Canon

Canon imageRUNNER 1750iF Guida di sicurezza

Canon

Canon MultiPASS MP360 Manuale utente

Canon

Canon FAXPHONE L75 Manuale utente

Canon

Canon E4570 Guida all'installazione

Canon

Canon PIXMA MX340 Series Manuale utente

Canon

Canon PIXMA MX722 Manuale

Canon

Canon PIXMA MG5520 Manuale utente

Canon

Canon Pixma MP800R Manuale utente

Canon

Canon iR1020 Series Manuale utente

Canon

Canon imageRUNNER 1025 Manuale utente

Manuali Stampante tutto in uno popolari di altre marche

Triumph Adler

Triumph Adler DC 2016 Manuale

Epson

Epson WorkForce WF-2510 Guida utente

Epson

Epson Stylus Scan 2000 Manuale di installazione e funzionamento

Epson

Epson PictureMate Snap PM 240 Manuale di istruzioni

Konica Minolta

Konica Minolta bizhub C35 Manuale utente

Brother

Brother MFC-J430w Manuale utente

Konica Minolta

Konica Minolta BIZHUB 558 Manuale utente

Lexmark

Lexmark MX710 Series Manuale

Brother

Brother MFC-9760 Manuale utente

Lexmark

Lexmark XC8155 Manuale utente

Lexmark

Lexmark X642E Manuale utente

Sharp

Sharp MX-2310U Guida

Aficio

Aficio 200 Manuale utente

Ricoh

Ricoh Pro C900 Manuale utente

Lexmark

Lexmark X925 Manuale utente

Brother

Brother Business Smart MFC-J4510dw Manuale utente

Epson

Epson Stylus CX8400 Series Manuale utente

Oce

Oce VarioLink 5022 Manuale utente