Canon XC10 Manuale utente

PUB. DIM-1119-000
This guide introduces only basic functions. To download the Instruction
Manual, which contains more advanced information, refer to page 6.
4K Camcorder
Quick Guide
Ce guide présente uniquement les fonctions de base. Pour télécharger le
mode d’emploi contenant des informations plus approfondies, consultez
la page 6.
Caméscope 4K
Guide rapide
Esta guía solo muestra las funciones básicas. Para descargar el Manual
de instrucciones, que contiene información más avanzada, consulte la
página 7.
Videocámara 4K
Guía breve
English Français Español

2
Important Usage Instructions
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
To reduce the risk of fire or electric shock, do not expose this apparatus to dripping or splashing, and do not place objects filled with
liquids, such as vases, on the apparatus.
WARNING
TO REDUCE THE RISK OF ELECTRIC SHOCK AND TO REDUCE ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES
ONLY.
COPYRIGHT WARNING:
Unauthorized recording of copyrighted materials may infringe on the rights of copyright owners and be contrary to copyright laws.
FCC NOTICE
4K Camcorder, XC10 Systems.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Use of shielded cable is required to comply with class B limits in Subpart B of Part 15 of FCC Rules.
Do not make any changes or modifications to the equipment unless otherwise specified in the manual.
If such changes or modifications should be made, you could be required to stop operation of the equipment.
Model ID0052 (including WLAN Module Model RF400, FCC ID: AZD400)
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1)
this device may not cause interference, and (2) this device must accept any interference, including interference that may cause
undesired operation of the device.
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
The available scientific evidence does not show that any health problems are associated with using low power wireless devices.
There is no proof, however, that these low power wireless devices are absolutely safe. Low power wireless devices emit low levels
of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by
heating tissue), exposure of low-level RF that does not produce heating effects causes no known adverse health effects. Many
studies of low-level RF exposures have not found any biological effects. Some studies have suggested that some biological effects
might occur, but such findings have not been confirmed by additional research. This model has been tested and found to comply
with FCC/IC radiation exposure limits set forth for an uncontrolled equipment and meets the FCC radio frequency (RF) Exposure
Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules.
Compliance with FCC requirement 15.407(c) Data transmission is always initiated by software, which is the passed down through
the MAC, through the digital and analog baseband, and finally to the RF chip. Several special packets are initiated by the MAC. These
are the only ways the digital baseband portion will turn on the RF transmitter, which it then turns off at the end of the packet.
Therefore, the transmitter will be on only while one of the aforementioned packets is being transmitted. In other words, this device
automatically discontinues transmission in case of either absence of information to transmit or operational failure.
Frequency Tolerance: 25 ppm
Canon U.S.A., Inc.
One Canon Park, Melville, NY 11747, USA
Tel No. 1-800-OK-CANON (1-800-652-2666)

3
English
Important Safety Instructions
REGIONS OF USE
XC10 is in compliance (as of March 2015) with the radio signal regulations of the regions listed below. For details on other regions
where they can be used, make inquiries with the contacts listed on the back cover of this guide.
The Mains plug is used as the disconnect device. The Mains plug shall remain readily operable to disconnect the plug in case of an
accident.
CA-570 identification plate is located on the bottom.
CAN ICES-3(B)/NMB-3(B)
REGIONS
Canada, Hong Kong S.A.R., South Korea, Taiwan, USA
Model
ID0052: XC10
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). NO
USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE
PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure, that may be of
sufficient magnitude to constitute a risk of electric shock to
persons.
The exclamation point, within an equilateral triangle, is intended to
alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying
the product.
In these safety instructions the word “apparatus” refers to the
Canon 4K Camcorder XC10 and all its accessories.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers)
that produce heat.
8. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other.
A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided for your
safety. If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
9. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
10.Only use attachments/accessories specified by the
manufacturer.
11.Unplug this apparatus during lightning storms or when
unused for long periods of time.
12.Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.

4
Precautions About the Battery Pack
DANGER!
Treat the battery pack with care.
• Keep it away from fire (or it might explode).
• Do not expose the battery pack to temperature higher than 60 °C (140 °F). Do not leave it near a heater or
inside a car in hot weather.
• Do not try to disassemble or modify it.
• Do not drop it or subject it to shocks.
• Do not get it wet.
Important Note about the Recording Media
• Observe the following precautions while the ACCESS indicator is on or flashing in red. Failure to do so may
result in permanent data loss or damage to the recording media.
- Do not disconnect the camcorder’s power source or turn off the camcorder.
- Do not open the recording media slot cover.
- Do not change the camcorder’s operating mode.
Trademark Acknowledgements
• SD, SDHC and SDXC Logos are trademarks of SD-3C, LLC.
• Canon is an authorized licensee of the CFast 2.0™ trademark, which may be registered in various jurisdictions.
• Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other
countries.
• Apple, App Store, Mac OS, Final Cut Pro are trademarks of Apple Inc., registered in the U.S. and other countries.
• IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.
• Google, Android, Google Play, are trademarks of Google Inc.
• Wi-Fi is a registered trademark of the Wi-Fi Alliance.
• Wi-Fi Certified, WPA, WPA2, and the Wi-Fi Certified logo are trademarks of the Wi-Fi Alliance.
• WPS as used on the camcorder's settings, onscreen displays and in this manual signifies Wi-Fi Protected Setup.
• The Wi-Fi Protected Setup Identifier Mark is a mark of the Wi-Fi Alliance.
• JavaScript is a trademark or registered trademark of Oracle Corporation, its affiliates or subsidiaries in the United States and other
countries.
• HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the
United States and other countries.
• Other names and products not mentioned above may be trademarks or registered trademarks of their respective companies.
• This device incorporates exFAT technology licensed from Microsoft.
• This product is licensed under AT&T patents for the MPEG-4 standard and may be used for encoding MPEG-4 compliant video and/o
r
decoding MPEG-4 compliant video that was encoded only (1) for a personal and noncommercial purpose or (2) by a video provider
licensed under the AT&T patents to provide MPEG-4 compliant video. No license is granted or implied for any other use for MPEG-4
standard.

5
Supplied Accessories
English
Supplied Accessories
The following accessories are supplied with the camcorder.
CA-570 Compact Power Adapter
(incl. power cord)
LP-E6N Battery Pack
(incl. protective cover)
Lens Hood
Viewfinder Unit
(incl. viewfinder unit cover)
Lens Cap RC-6 Wireless Remote Controller
(incl. CR2032 lithium button battery)
Shoulder Strap IFC-300PCU/S USB Cable HTC-100/S High Speed HDMI Cable

6
Table of Contents
Table of C ontents
05 Supplied Accessories
07 Names of Parts
13 Onscreen Icons and Displays
18 Step 1: Charging the Battery Pack
21 Step 2: Preparing the Camcorder
22 Step 3: Date, Time and Language Settings
25 Step 4: Basic Operation of the Camcorder
27 Step 5: Preparing Recording Media
30 Recording Video and Taking Photos
33 Playback
36 Connecting to an External Monitor
37 Saving Clips to a Computer
38 Overview of Wi-Fi Functions
39 Abridged Specifications
About the Camcorder’s Wi-Fi Functions
You can enjoy a variety of Wi-Fi functions with your camcorder. To read about all the
convenient ways you can use your camcorder using Wi-Fi, refer to the full-version
Instruction Manual (PDF file).
Downloading the Full-version Instruction Manual (PDF File)
To learn how to use the more advanced functions, to read important handling precautions
and to consult the troubleshooting section if an error message is displayed, download the
full-version Instruction Manual (PDF file). Access the following Web site. Click on your
country/region and follow the onscreen instructions to download the PDF file.
http://www.canon.com/icpd/

7
Names of Parts
English
Names of Parts
3412
6
7
8
11910
5
1 Focus ring (;69)
2Zoomring(;68)
3 FOCUS (focus mode) switch
(;69)
4 Shoulder strap mount (;27)
5 MIC (microphone) terminal (;81)
6HDMIOUTterminal(;115)
7USBterminal(;89, 118)
8DCINterminal(A18)
9 DISP. (display) button (;49)/
Assignable button 1 (;100)
10 PUSH AF (momentary autofocus)
button (;74)/
Assignable button 2 (;100)
11 Exhaust ventilation outlet (;50)

8
Names of Parts
12 3
1 Air intake vent (;50)
2 Shoulder strap mount (;27)
3×(headphone) terminal (;87)
4
5
6
4 Tally lamp (;41)
5 Remote sensor (;38)
6 Lens hood (;24)

9
Names of Parts
English
1
2
3
4
567
8910
1 LCD touch screen (A21)
2 MAGN. (magnification) button
(;72)/
Assignable button 3 (;100)
3 MENU button (;31)
4Joystick(;31)
5 ACCESS indicator (A27)
6 CARD OPEN (open recording media
slot cover) lever (A27)
7 Recording media slot cover
8 CFast card slot (A27)
9 SD card slot (A27)
10 CFast card release button (;34)

10
Names of Parts
1
3
4
5
6
7
8
9
10
11
2
1 Built-in microphone (;81)
2 Accessory shoe (;89, 97):
For attaching the optional GP-E2 GPS
Receiver or optional EX-series
Speedlite for EOS cameras.
3 ON/OFF button (A22)
4START/STOPbutton(A30)/PHOTO
button (A30): When you are
recording video clips, this button is
referred to in this manual as the
START/STOP button; when you are
shooting photos, it is referred to as the
PHOTO button.
5Movie/photoswitch(A25)
6Controldial(;52)
7^(playback) button (;103)
8 POWER/CHG (power/battery charging)
indicator (A18)
9 Shooting mode dial (;52)
10 Shooting mode dial button (;52)
11 Built-in speaker (;108)
Altri manuali per XC10
2
Indice
Altri manuali Canon Videocamera

Canon
Canon LEGRIA HF R506 Manuale utente

Canon
Canon ZR30 MC Manuale utente

Canon
Canon UC-X40 Hi Manuale utente

Canon
Canon XF300 Manuale

Canon
Canon XA60 Manuale utente

Canon
Canon MV700i Manuale utente

Canon
Canon imageRunner 60 Manuale utente

Canon
Canon MV900 Manuale utente

Canon
Canon XF300 Manuale utente

Canon
Canon Vixia HG21 Manuale utente

Canon
Canon FX 305 Manuale utente

Canon
Canon LEGRIA HV40 Manuale utente

Canon
Canon optura Xi Manuale utente

Canon
Canon VIXIA HF20 Manuale utente

Canon
Canon 4316B001 Manuale utente

Canon
Canon VC 20 Manuale utente

Canon
Canon MV 100 Manuale utente

Canon
Canon LEGRIA HF21 Manuale utente

Canon
Canon LEGRIA HFM40 Manuale utente

Canon
Canon HG-10 Manuale utente





















